AIRBUS UKCATIA V5 and Foundation Course Sketcher

Chia sẻ: Nguyen Van Hung | Ngày: | Loại File: PDF | Số trang:65

0
84
lượt xem
10
download

AIRBUS UKCATIA V5 and Foundation Course Sketcher

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

Within a sketch you can create 2D-wireframe geometry which can be used to produce Solids or surfaces and is represented by a solid line font. 2D-construction wireframe geometry can also be created which is used as an aid to produce the solid 2Dwireframe geometry. To position and control the size of the sketch, geometric and positional constraints are used which are displayed in green. A Sketch Node will be attached to the Specification Tree in which the Sketch Axis, Geometry and Constraints details are held. The Specification Tree can be expanded by selecting the ‘+’ symbol on the Tree Branch or collapsed by selecting the ‘-‘ symbol....

Chủ đề:
Lưu

Nội dung Text: AIRBUS UKCATIA V5 and Foundation Course Sketcher

Đồng bộ tài khoản