Auto control for Commercial building P2

Chia sẻ: Thanh Liem | Ngày: | Loại File: PDF | Số trang:10

0
80
lượt xem
12
download

Auto control for Commercial building P2

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

The temperature sensor for an electronic controller may be a length of wire or a thin metallic film (called a resistance temperature device or RTD) or a thermistor. Both types of resistance elements change electrical resistance as temperature changes. The wire increases resistance as its temperature increases. The thermistor is a semiconductor that decreases in resistance as the temperature increases. Because electronic sensors use extremely low mass, they respond to temperature changes more rapidly than bimetal or sealed-fluid sensors. The resistance change is detected by a bridge circuit. Nickel “A”, BALCO, and platinum are typical materials used for this type...

Chủ đề:
Lưu

Nội dung Text: Auto control for Commercial building P2

Đồng bộ tài khoản