CCNA Semester 1 Skills Based Final – Part 1 Cable Build / Test

Chia sẻ: Trung Ha | Ngày: | Loại File: PDF | Số trang:1

0
216
lượt xem
28
download

CCNA Semester 1 Skills Based Final – Part 1 Cable Build / Test

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

Build an Ethernet 10BaseT straight thru cable to connect from a workstation to a hub or switch. Use UTP cable and wire all eight conductors using the correct wire colors and pins for either a T568A or T568B. Test the cable with a cable tester to verify continuity, correct pinouts and cable length. This cable can be used to connect your workstation to the hub or switch for exam part 3.

Chủ đề:
Lưu

Nội dung Text: CCNA Semester 1 Skills Based Final – Part 1 Cable Build / Test

Đồng bộ tài khoản