Composite Materials and Mechanical Design P2

Chia sẻ: Thanh Liem | Ngày: | Loại File: PDF | Số trang:28

0
74
lượt xem
25
download

Composite Materials and Mechanical Design P2

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

There are a large and increasing number of processes for making PMC parts. Many are not very labor-intensive and can make near-net shape components. For thermoplastic matrices reinforced with discontinuous fibers, one of the most widely used processes is injection molding. However, as discussed in Section 9.3, the stiffness and strength of resulting parts are relatively low. This section focuses on processes for making composites with continuous fibers. Many PMC processes combine fibers and matrices directly. However, a number use an intermediate material called a prepreg, which stands for preimpregnated material, consisting of fibers embedded in a thermoplastic or partially...

Chủ đề:
Lưu

Nội dung Text: Composite Materials and Mechanical Design P2

CÓ THỂ BẠN MUỐN DOWNLOAD

Đồng bộ tài khoản