Configuring Linux as an NIS Client

Chia sẻ: La Quang | Ngày: | Loại File: PDF | Số trang:3

0
90
lượt xem
9
download

Configuring Linux as an NIS Client

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

This command will only set the NIS domain name temporarily. When the system is rebooted, this information will be erased unless the system is configured to run this command every time the system boots up. There are many methods that can be used to force a Linux system to run commands upon startup. Many of these commands have already been learned or will be learned in this course. One easy method is to edit the /etc/init.d/network file by using the following steps

Chủ đề:
Lưu

Nội dung Text: Configuring Linux as an NIS Client

Đồng bộ tài khoản