Full Duplex-Half Duplex Misconfiguration (troubleshooting

Chia sẻ: La Quang | Ngày: | Loại File: PDF | Số trang:1

0
118
lượt xem
5
download

Full Duplex-Half Duplex Misconfiguration (troubleshooting

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

Duplex mismatch on a point-to-point link is a very common configuration error. This occurs especially when one side of the link is hard-coded full duplex. If you leave the other side in auto-negotiation mode, it will often end up in half-duplex (a port with duplex hard coded, does not negotiate any more). This may not stop the communication between switches but it may cause several other problems such as packet loss or bridging loops.

Chủ đề:
Lưu

Nội dung Text: Full Duplex-Half Duplex Misconfiguration (troubleshooting

Đồng bộ tài khoản