Fundamentals of Machine Design P24

Chia sẻ: Phong Phu | Ngày: | Loại File: PDF | Số trang:10

0
52
lượt xem
12
download

Fundamentals of Machine Design P24

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

Stresses in thin cylinders If the wall thickness is less than about 7% of the inner diameter then the cylinder may be treated as a thin one. Thin walled cylinders are used as boiler shells, pressure tanks, pipes and in other low pressure processing equipments. In general three types of stresses are developed in pressure cylinders viz. circumferential or hoop stress, longitudinal stress in closed end cylinders and radial stresses.

Chủ đề:
Lưu

Nội dung Text: Fundamentals of Machine Design P24

Đồng bộ tài khoản