The HLP-V Adjustable Frequency Drive
contains dangerous voltages when connected
to line voltage. After disconnecting
from the line wait at least 15 minutes
before touching any elect r ica l
Also make sure that other voltage inputs
have been disconnected, such as external
24 VDC, load-sharing (linkage of DC
intermediate circuit), as well as the motor
connection for kinetic back-up. Only
a competent electrician should carry out
the electrical installation. Improper installation
of the motor or the Holip may cause
equipment failure, serious injury or death.
Follow this manual and National Electrical
Codes and local safety codes....