Lab 1.2.8 Configuring DHCP Relay

Chia sẻ: Thanh Ha | Ngày: | Loại File: PDF | Số trang:6

0
107
lượt xem
29
download

Lab 1.2.8 Configuring DHCP Relay

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

A DHCP client uses IP broadcasts to find the DHCP server. However, these broadcasts are not forwarded by routers, so in the case of the remote LAN, the workstations will not be able to locate the DHCP server. The router must be configured with the ip helper-address command to enable forwarding of these broadcasts, as unicast packets, to the specific server. Routing between the remote router and the campus router is done using a static route between the remote router and gateway router, and a default route between the gateway router and remote router....

Chủ đề:
Lưu

Nội dung Text: Lab 1.2.8 Configuring DHCP Relay

Đồng bộ tài khoản