MECHANICAL FASTENERS P2

Chia sẻ: Thanh Liem | Ngày: | Loại File: PDF | Số trang:21

0
63
lượt xem
12
download

MECHANICAL FASTENERS P2

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

This suggests that a joint designed to the above equation might have larger and/or more numerous bolts than necessary to support pressure loads the bolts will never see. The ASME Boiler and Pressure Vessel Code takes an even more conservative point of view than that described by the above equation to introduce a factor of safety. This code assumes that the bolts see 100% of external load Lx, not an amount reduced by the stiffness ratio. 35.9 EVALUATION OF SLIP CHARACTERISTICS A slip-resistant joint is one that has a low probability of slip at any time during the life of...

Chủ đề:
Lưu

Nội dung Text: MECHANICAL FASTENERS P2

Đồng bộ tài khoản