Nano and Microelectromechanical Systems P4

Chia sẻ: Tran Long | Ngày: | Loại File: PDF | Số trang:20

0
61
lượt xem
22
download

Nano and Microelectromechanical Systems P4

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

Increasing the iMEMS Accelerometer’s Output Scale Factor Figure 15 shows the basic connections for using an external buffer amplifier to increase die output scale factor. The output multiplied by the gain of the buffer, which is simply the value of resistor R3 divided by RI. Choose a convenient scale factor, keeping in mind that the buffer pin not only amplifies the signal, but my noise or drift as well. Too much pin can also cause the buffer to saturate and clip the output waveform. Note that the “+” input of the external op amp uses the offset null pin of...

Chủ đề:
Lưu

Nội dung Text: Nano and Microelectromechanical Systems P4

Đồng bộ tài khoản