Nội dung Text: Nghệ thuật xếp hình Nhật Bản: yuanbao2
Yuanbao (Ver 1.2) c Ronald Koh - 2000
1. 2. 3.
Turn paper over.
Hold all layers firmly in position and
fold corner A down as shown, about 9.
1/5th of the distance between line BD
and corner C.
... then turn paper
Crease firmly through all
layers and unfold.
Unfold to position at
start of Step 4, ... 11.
Bring each of the four
corners to a verticle
position, along the crease
lines made in Steps 6 & 7.
... like this.
14. Fold one layer all the way Now push the each
down, drawing the corners side to the middle to
in at the same time to form bring the circled point
a neat triangle on each in the centre towards
side, ... you.
Open out the over-
lapping layer on each
side as you fold up. 16
Push the upright
Open out to form a
hollowed square at
Fold the triangular piece into the pocket
immediately behind, then repeat from Finally, adjust the shape of the
Step 12 at the back. yuanbao until it looks like this.