OSPF Lab Scenario 1 - Classless and Discontiguous Networks

Chia sẻ: Trung Ha | Ngày: | Loại File: PDF | Số trang:1

0
52
lượt xem
7
download

OSPF Lab Scenario 1 - Classless and Discontiguous Networks

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

On each router, create an OSPF process that puts each interface into area 0.0.0.1. I strongly recommend that you have one network statement for each interface, but you can experiment with wildcards that put more than one interface into OSPF. It is your choice whether to advertise the loopback subnets. You may choose to enable OSPF debugging and watch the activity as OSPF initializes. With increasing numbers of routers, you will have more and more debug traffic -- you have been warned! Simply record the traffic for later analysis; it will go by too fast to review on the screen....

Chủ đề:
Lưu

Nội dung Text: OSPF Lab Scenario 1 - Classless and Discontiguous Networks

Đồng bộ tài khoản