Pracrical Machinery Management for Process Plants P2

Chia sẻ: A Ly | Ngày: | Loại File: PDF | Số trang:10

0
57
lượt xem
19
download

Pracrical Machinery Management for Process Plants P2

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

Major Process Equipment Maintenance and Repair If failed bearings are suspected in pump or motor: Check radial clearance and end float in motor. Run motor and check for abnormal noise, vibration. If motor is bad, remove and repair.Diagnosing Pump and Seal Problems In the Shop While the pump is being repaired it is advisable to carefully examine every component. A recommended procedure is to match mark all parts prior to disassembly and to make the following checks while dismantling the pump:

Chủ đề:
Lưu

Nội dung Text: Pracrical Machinery Management for Process Plants P2

Đồng bộ tài khoản