intTypePromotion=1
zunia.vn Tuyển sinh 2024 dành cho Gen-Z zunia.vn zunia.vn
ADSENSE

Quá trình hình thành tư liệu hướng dẫn cách chấm mạch eprom trong KIT vi xử lý p6

Chia sẻ: Asfaf AfaFaf | Ngày: | Loại File: PDF | Số trang:11

72
lượt xem
3
download
 
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

LUAÂÄN VAÊN TOÁT NGHIEÄP 56 ;KeyKRB : Chuong trinh con quet ban phim. Ma cua phim an duoc cat ;trong thanh ; ghi A. ;DELAY : Chuong trinh con tri hoan theo thoi hang 0.1 ms. He so tri ;hoan duoc ; nap vao thanh ghi A. ;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++ ;##################################################################### ;Khai bao cac nhan duoc su dung. ;##################################################################### RegCNT equ 03h PortA equ 00h PortB equ 01h PortC equ 02h CntI79 equ 0A001h DataI79 equ 0A000h KEYBRD equ 0216h DELAY equ 0310h KeyGO equ 17h ;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ End LUAÂÄN VAÊN TOÁT NGHIEÄP 57 B.Module Demo.cpp #include #include #include #include #include #include #include #include #include #include #include #include...

Chủ đề:
Lưu

Nội dung Text: Quá trình hình thành tư liệu hướng dẫn cách chấm mạch eprom trong KIT vi xử lý p6

  1. 56 LUAÂÄN VAÊN TOÁT NGHIEÄP ;KeyKRB : Chuong trinh con quet ban phim. Ma cua phim an duoc cat ;trong thanh ; ghi A. ;DELAY : Chuong trinh con tri hoan theo thoi hang 0.1 ms. He so tri ;hoan duoc ; nap vao thanh ghi A. ;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++ ;##################################################################### ;Khai bao cac nhan duoc su dung. ;##################################################################### RegCNT equ 03h PortA equ 00h PortB equ 01h PortC equ 02h CntI79 equ 0A001h DataI79 equ 0A000h KEYBRD equ 0216h DELAY equ 0310h KeyGO equ 17h ;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ End
  2. 57 LUAÂÄN VAÊN TOÁT NGHIEÄP B.Module Demo.cpp #include #include #include #include #include #include #include #include #include #include #include #include "screen.h" #include "mouse.h" #include "button.hpp" #include "textbox.hpp" #include "list.hpp" #include "disklist.hpp" #include "send.hpp" #define NumBox 2 #define NumBut 2 LPEVENT lpEvent; //bien chua cac bien co chuot char szMessage[128]; BUTTON But[NumBut],NutKiem; TEXTBOX Box[NumBox],Port; char DiskName[27],DName; char ftype[15]="*.prn"; char inter_Path[100]=""; char RequF[100]; unsigned int St_address,End_address=0; char Sta_hex[5],End_hex[5]; //--------------------------------------------------------- int TestPressedButton(int x,LPEVENT lpEvent); int TestPressTexbox(int x,LPEVENT lpEvent,char layra[],unsigned *attribp); void MainProgram(); int TestPressList(LIST L,LPEVENT lpEvent,char s[],unsigned *attrib,char *typ);//nhap bang liet ke int SendFile(); //--------------------------------------------------------- void main(void) { InitGraphics(); InitValues("Download Program."); InitScreen(); if (!InitMouse(&MainWindow.rViewPort)) { OutMessage("Mouse driver not found. Init mouse and return"); getch(); closegraph(); exit(1); } ShowMouse(); MainProgram(); closegraph(); }
  3. 58 LUAÂÄN VAÊN TOÁT NGHIEÄP //--------------------------------------------------------- void MainProgram() { char Name[20],buffer[MAXPATH]; unsigned attrib,Attribp; SEND Send; LIST L; But[0].InitButton(200,380,250,400,LIGHTGRAY,"Send"); But[1].InitButton(400,380,450,400,LIGHTGRAY,"Exit"); Box[0].InitTextBox(50,70,477,90,GREEN,LIGHTGREEN,"Open File"); Port.InitTextBox(50,270,250,290,GREEN,LIGHTGREEN,"Out port"); Port.GetS_in("LPT1"); L.InitList(480,70,500,90,LIGHTGRAY); But[0].OutButton();//xuat nut lenh But[1].OutButton();//xuat nut lenh Box[0].OutTextBox();//xuat hop nhap text Port.OutTextBox(); L.Show(); setcolor(BLACK); line(50,150,250,150); line(50,150,50,215); setcolor(WHITE); line(50,215,250,215); line(250,150,250,215); outtextxy(50,130,"Free memory request"); outtextxy(55,158,"Start ad :"); outtextxy(55,178,"End ad :"); outtextxy(55,198,"Total :"); OutMessage("Click mouse to chose action"); int kkkk; char RequestFile[15]=""; do//kiem tra nhap chuot chon cong viec { ShowMouse(); lpEvent = GetEvent();//lay bien co chuot if(TestPressedButton(2,lpEvent)==0)//kiem tra xem da click vao nut nao //0:nhan OK { char InName[100],OutName[100]; Box[0].GetS(InName); if(InName[strlen(InName)-1]=='\\') InName[strlen(InName)-1]='\0'; _dos_getfileattr(InName,&attrib); if(attrib==16) { OutMessage(""); OutError("Please enter a file name"); OutMessage("Click mouse to chose action"); } else//la file { if(End_address!=0) { if(OutError("Are you sure ?")) { OutMessage("Sending... Press Esc to stop if time is over."); Send.CatFile(Sta_hex,End_hex,inter_Path);
  4. 59 LUAÂÄN VAÊN TOÁT NGHIEÄP Send.Out(); HideMouse(); if(Send.Out()!=-1) { HideMouse(); OutMessage(""); OutError("Task is complete."); OutMessage("Click mouse to choose action"); } else { HideMouse(); OutMessage("Click mouse to choose action"); } } } } }//if(TestPressedButton if(TestPressList(L,lpEvent,Name,&attrib,ftype)==1) //chon OK { switch (attrib) { case 16:chdir(Name); getcwd(buffer, MAXPATH);//lay duong dan hien thoi vao buffer strcpy(inter_Path,buffer); Box[0].GetS_in(inter_Path); Box[0].OutTextBox(); break; default: getcwd(buffer, MAXPATH);//lay duong dan hien thoi vao buffer strcpy(inter_Path,buffer); if(inter_Path[strlen(inter_Path)-1]!='\\') strcat(inter_Path,"\\"); strcat(inter_Path,Name); Box[0].GetS_in(inter_Path); Box[0].DuongDan(inter_Path); Box[0].OutTextBox(); break; }//end switch }//if(TestPressList( //chon Cancel TestPressTexbox(NumBox,lpEvent,inter_Path,&Attribp);//Path lay ra duong dan cho file nhap vao //ShowMouse(); if(kbhit()) { kkkk=getch(); if(kkkk==0)kkkk=getch(); } Box[0].GetS(RequF); { int n=strlen(RequF); if(n>5)//?.??? if(RequF[n-1]!='\\') { while(n>0&&RequF[n-1]!='\\') { n--; } char *strtemp=RequF;
  5. 60 LUAÂÄN VAÊN TOÁT NGHIEÄP for(int m=0;m
  6. 61 LUAÂÄN VAÊN TOÁT NGHIEÄP do { fread(&c,1,1,f); end = clock(); }while(c!='m'&&c!='M'&&(period=(end - start) / CLK_TCK)=10) goto Error; fseek(f,-1,SEEK_CUR); fread(buf,7,1,f); buf[7]='\0'; end = clock(); if(!strcmp(buf,"Macros:")||!strcmp(buf,"MACROS:")||!strcmp(buf," macros:")) thoat=0; }while(thoat&&(period=(end - start) / CLK_TCK)=15) goto Error; fseek(f,-1,SEEK_CUR); start = clock(); do { dem=0; do { fread(&c,1,1,f); if(c=='\n') fseek(f,-3,SEEK_CUR); else fseek(f,-2,SEEK_CUR); end = clock(); }while(c!='\''&&(period=(end - start) / CLK_TCK)=10) goto Error; do { dem++; fread(&c,1,1,f); if(c=='\n') dem=20; fseek(f,-2,SEEK_CUR); end = clock(); }while(dem
  7. 62 LUAÂÄN VAÊN TOÁT NGHIEÄP for(FindValue=0;FindValueMsg==1) { for(int i=0;i=lpEvent->Posx&&But[i].Bottom()>=lpEvent->Posy) { HideMouse(); But[i].PressButton(); delay(100); But[i].OutButton(); if(i==1) { if(OutError("Do you want to quit ?")==0) return -1; closegraph(); exit(1); } ShowMouse();
  8. 63 LUAÂÄN VAÊN TOÁT NGHIEÄP return i; } } return -1; } //--------------------------------------------------------- int TestPressTexbox(int x,LPEVENT lpEvent,char layra[],unsigned *attribp) { *attribp=0; if(lpEvent->Msg==1) { for(int i=0;i=lpEvent->Posx&&Box[i].Bottom()>=lpEvent->Posy) { HideMouse();//giau chuot de khong bi vet lem mau o vi tri chuot char LastName[100]; Box[i].GetS(LastName); OutMessage("Enter a file name. Press Enter to finish, Esc to ignore."); Box[i].Path();//lay Path vao bien S cua TEXTBOX Box[i].OutTextBox(); Box[i].GetS(layra);//lay ra text da nhap vao //tao chuan cho chuoi Path if(layra[strlen(layra)-1]=='>')//gat bo dau \> sau thu muc nhung van giu lai doi voi o dia if(layra[strlen(layra)-2]=='\\') if(layra[strlen(layra)-3]==':')//dang a:\> layra[strlen(layra)-1]='\0';//ra a:\ else //dang a:\fname\> layra[strlen(layra)-2]='\0';//ra dang a:\fname else layra[strlen(layra)-1]='\0';//bo dau > if(layra[strlen(layra)-1]=='\\')//gat bo dau \ sau thu muc nhung van giu lai doi voi o dia if(layra[strlen(layra)-2]!=':')//dang a:\fname\ layra[strlen(layra)-1]='\0'; if(layra[strlen(layra)-1]==':') if(strlen(layra)==2)//dang a: strcat(layra,"\\");//ra a:\ int NotExist=_dos_getfileattr(layra, attribp); int m=strlen(layra)-1; while(layra[m]!='\\')//dem so ky tu thuoc ve phan Path m--; for(int n=0;n='a'&&layra[n]
  9. 64 LUAÂÄN VAÊN TOÁT NGHIEÄP if(layra[1]==':'&&layra[0]!=LastName[0]) setdisk(toupper(layra[0])-'A'); chdir(layra);//vao them mot cap thu muc if(layra[strlen(layra)-1]!='\\') strcat(layra,"\\"); Box[0].GetS_in(layra); Box[0].OutTextBox(); OutMessage("Click mouse to chose action"); return 0; } if (NotExist == 0) { return 0; } else { OutMessage("File does not exist."); Box[0].GetS_in(LastName); Box[0].OutTextBox(); return 1; } }//end if Open } } return -1; } //--------------------------------------------------------- int TestPressList(LIST L,LPEVENT lpEvent,char s[],unsigned *attrib,char *typ) { int k=0; if(lpEvent->Msg==1) if(L.Left()Posx&&L.Top()Posy&&L.Right()>=lpEvent->Posx&&L.Bottom()>=lpEvent->Posy) { OutMessage("Open File Name"); delay(100);//neu khong thi khong the putimage, khong thoat khoi bang list duoc k=L.Press(s,&Box[0],attrib,DiskName,&DName,typ); } return k; } //--------------------------------------------------------- II.CLASS BUTTON.HPP #if !defined __BUTTON__ #define __BUTTON__ class BUTTON { private: int l,t,r,b;//toa do box int Color; char S[100]; public: void InitButton(int x1,int y1,int x2,int y2,int color,char s[]); void OutButton(); void PressButton(); int Left() {return l;} int Right() {return r;} int Top() {return t;} int Bottom() {return b;} }; #endif
  10. 65 LUAÂÄN VAÊN TOÁT NGHIEÄP III.MODULE BUTTON.CPP #include #include #include "button.hpp" //--------------------------------------------------------- void BUTTON::InitButton(int x1,int y1,int x2,int y2,int color,char s[]) { l=x1; t=y1; r=x2; b=y2; Color=color; strcpy(S,s); } //--------------------------------------------------------- void BUTTON::OutButton() { setfillstyle(SOLID_FILL,Color); bar(l,t,r,b); setcolor(WHITE); line(l,t,r,t); line(l,t,l,b); setcolor(BLACK); line(r,t,r,b); line(l,b,r,b); setcolor(BLUE); int x=l+(r-l-textwidth(S))/2,y=t+(b-t-textheight(S))/2; outtextxy(x,y,S); } //--------------------------------------------------------- void BUTTON::PressButton() { setcolor(BLACK); line(l,t,r,t); line(l,t,l,b); setcolor(WHITE); line(r,t,r,b); line(l,b,r,b); } //--------------------------------------------------------- IV. CLASS DISKLIST.HPP #include "textbox.hpp" #include "mouse.h" #if !defined __DISKLIST__ #define __DISLIST__ extern char Disk(char *s); extern int ChosenDisk(char *s,/*TEXTBOX *Box,*/char PreDisk,char CurDisk); extern LPEVENT CheckChooseDisk(char *DiskName,char *DName,LPEVENT lpEvent,int x,int y); extern char *FileType(TEXTBOX *b); #endif V.MODULE DISKLIST.CPP #include #include #include #include #include #include
  11. 66 LUAÂÄN VAÊN TOÁT NGHIEÄP #include #include // #include "disklist.hpp" char Disk(char *s)//kiem tra co bao nhieu o dia trong may, luu ten cac o dia vao chuoi s, tra ve ten o dia hien hanh { int save,disk, disks; int equip_check; char c[4]; s[0]='\0'; save = getdisk(); equip_check = biosequip(); equip_check >>= 6; equip_check = (equip_check & 3) + 1;//dem so o dia mem for (disk = 0;disk < 26;++disk) { setdisk(disk); if (disk == getdisk()) { sprintf(c,"%c",disk +'A'); strcat(s,c); } } setdisk(save); if(equip_check==1&&s[1]=='B')//neu chi co ot o dia mem for(int i=1;i
ADSENSE

CÓ THỂ BẠN MUỐN DOWNLOAD

 

Đồng bộ tài khoản
2=>2