Setting Up Profiles phần 1

Chia sẻ: Tuan Bui Nghia | Ngày: | Loại File: PDF | Số trang:6

0
49
lượt xem
4
download

Setting Up Profiles phần 1

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

Setting Up Profiles The first time Outlook runs, you're presented with a setup wizard to guide you through setting up your first account and profile. The first screen asks whether you want to configure Outlook to connect to a mail server.

Chủ đề:
Lưu

Nội dung Text: Setting Up Profiles phần 1

  1. Setting Up Profiles The first time Outlook runs, you're presented with a setup wizard to guide you through setting up your first account and profile. The first screen asks whether you want to configure Outlook to connect to a mail server. Select Yes if you're going to use Outlook for email, or select No if you're using Outlook only for your calendar, tasks, and contacts. This rest of this section assumes that you selected Yes and are setting up an email account. If you choose No, Outlook creates a no mail profile for you. To add email accounts later, follow the steps in the task "Add Additional Accounts to Your Profile," later in the hour. The first thing you need to do is tell Outlook what kind of email account you're using (see Figure 2.1). If you use multiple mail servers or have more than one account, the wizard walks you through the setup of your default email account. Figure 2.1. Choose your account type from the Server Type dialog and choose Next. You have the following mail server choices: • Microsoft Exchange Server— This option is normally used only in corporations. In most cases, the administrator preconfigures Exchange accounts for you.
  2. • POP3— In a POP3 account, messages are typically downloaded from the server and stored locally. If you aren't sure what kind of email account you have, it's probably a POP3 account. • IMAP— When you use IMAP, the messages are stored on the email server and Outlook downloads copies. IMAP accounts are common on college campuses. • HTTP— HTTP is used to download Web-based email accounts to Outlook. Currently, only Hotmail and MSN addresses support HTTP accounts. • Additional Server Types— Additional server types include Fax Services, Lotus Notes, Microsoft Mail (Workgroup Post Offices), and GroupWise. You won't have any services listed unless you've installed the appropriate software, such as the Windows Fax software or Notes connector. In most cases, you won't choose Additional Server types when setting up your default email account. Select the appropriate account type for your main email account. If you're unsure what type of account you have, check with your ISP or email provider. At this time, only Hotmail and MSN support HTTP access. Other Web-based accounts, such as Yahoo!, don't support the WebDAV protocol needed for HTTP access. If your Web-based mail service doesn't offer POP3 or IMAP service, you won't be able to use Outlook to check your email unless you use a third-party utility. AOL uses proprietary email protocols, not POP3 or IMAP, so you must continue to use AOL's email client or use a third-party utility to pull the mail from AOL if you want to use Outlook. Several enterprising developers have created utilities that enable you to use any popular email client with AOL or Yahoo! and other Web- based email servers. Search Google.com using the keywords Yahoo AOL Outlook for the latest offerings, including AOL2POP, Web2POP, and Izymail (POP3Hot). MS Mail is not a supported server type in Outlook 2003. If you use an MSMail post office and are upgrading to Outlook 2003, see http://www.outlook-tips.net/msmail.htm for more information. Task: Create Your First Outlook Profile For this exercise, we're using a POP3 account because POP3 is the most popular account type. In most cases, the information required is the same for any account type: your display name, email address, server names. Outlook completes the setup based on the
  3. account type you select. If you have an IMAP or HTTP account, see "Add Additional Accounts to Your Profile," which follows this section. 1. Enter your name as you want it to appear on your outgoing mail in the Your Name field. In most cases, you'll want to use your full name, but some people use their email address or a nickname. 2. Press the Tab key to move to the next field: E-mail Address. Enter the email address you use for this account. 3. The next field is Incoming Mail Server (POP3). Enter the name of your POP3 server. If you're unsure what to use, check with your ISP or email service's online help. In many cases, the POP3 server name is mail.domain-name.com, where domain-name is the domain your provider uses (see Figure 2.2). Figure 2.2. Enter your basic account information on the Internet E-mail Settings dialog. 4. The Outgoing mail server (SMTP) is next. Again, if you're unsure of what to enter, check with your provider. In many cases, it's either mail.domain-name.com or smtp.domain-name.com. 5. Enter the User name and Password required to access your email account. Check the Remember Password box only if your computer is secure; otherwise, anyone can open Outlook and check your email.
  4. 6. If your email provider requires secure password authentication, add a check to the Log on Using Secure Password Authentication (SPA) box. If you aren't sure, leave it blank, you probably don't need it. Secure Password Authentication (SPA), also known as NTLM (NT LanMan), is a form of password authentication supported by Windows servers. Unless your email account is hosted on a Windows server and SPA is enabled, you won't use SPA. When SPA is required, your ISP or administrator will tell you. 7. 8. Choose the Test Account Settings button to see whether your account information allows Outlook to connect to your mail server. When you click the button, a dialog appears like the one shown in Figure 2.3. Figure 2.3. Use Test Account Settings to verify that the information you entered is correct. If you entered an incorrect username, password, or server name, you'll receive an error indicating where the problem is. 9. Choose the More Settings button. Although the account is usable after completing the E-mail Accounts screen, additional configuration options are available. 10. On the General tab, enter a friendly name for your account to replace the server name Outlook uses by default (see Figure 2.4). By default, Outlook uses your incoming mail server name for the account, adding a number to the name for additional accounts that use that server; for example, mail.server.com and mail.server.com (1). Suggestions include your email alias, name, or nickname.
  5. Figure 2.4. If you use two or more email addresses and want all the replies to your messages to go to one address, enter the address in the Reply E-mail field. 11. Complete the Organization and Reply E-mail fields. In most cases, the email address you entered on the E-mail Accounts screen is also your reply to address and you can leave this field blank. However, you can use this field to redirect replies to another email account. If you're using your account at work, you might want to include your company name in the Organization field; otherwise, most users leave it blank. 12. Use the Outgoing Server tab if your SMTP server requires authentication or requires POP before SMTP, which means you must log on to the server to check mail before you send mail (see Figure 2.5).
  6. Figure 2.5. Use the Outgoing Server tab to configure the settings needed to connect to your outgoing email server. If you don't know if you need to change these settings, check your email provider's help files before making changes; in many cases, the default settings are correct.
Đồng bộ tài khoản