Sổ tay người dùng NET28 part 28

Chia sẻ: Dương Tùng Lâm | Ngày: | Loại File: PDF | Số trang:6

0
33
lượt xem
2
download

Sổ tay người dùng NET28 part 28

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

Tham khảo tài liệu 'sổ tay người dùng net28 part 28', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

Chủ đề:
Lưu

Nội dung Text: Sổ tay người dùng NET28 part 28

  1. Nó dễ sử dụng,Nó có sẵn trình tìm kiếm máy chủ Proxy Rất buồn là nó không miễn phí Đây là link: http://www.sa6ry.com/surfanonymous/ _____________________________________________________________ Anh nên thêm NetworkActiv vào danh sách Server www.NetworkActiv.com pretty dated linkfarm at this time but what the hell http://radified.com/Articles/internet_security.htm (c) www.ocforums.com Tôi không biết phải gửi bài này vào đâu nhưng có vẻ như rất nhiều người ở đây hỏi về những liên kết(link) đến những thứ xác định. Vì thế tôi sẽ gửi những link ở đây cho những ai cần chúng. Nếu ai đó có ý kiến rằng tôi không được gửi bài ở đây, thì hãy up lời chào mừng của bạn ở đây cho tất cả cùng thấy . Chúng đây; Motherboard Monitor v5.3 http://www.pcworld.com/downloads/fi...fid,7309,00.asp CPU Stability Test http://www.pcworld.com/downloads/fi...fid,7146,00.asp
  2. BIOS Wizard http://www.pcworld.com/downloads/fi...id,21480,00.asp SiSoft Sandra Standard http://www.pcworld.com/downloads/fi...fid,4005,00.asp Prime95 http://www.mersenne.org/freesoft.htm WCPUID http://hp.vector.co.jp/authors/VA00...c/download.html CPUID/CPU-Z http://www.cpuid.com/cpuz.php NEW Central Brain Identifier http://www.majorgeeks.com/download.php?det=3538 3DMark and PCMark http://www.futuremark.com/download/ CPU Monitor http://jongrieve.net/cpumon/ BenchMarks Downloads http://www.overclockersclub.com/dow...n=category&id=6 Tweaking Downloads http://www.overclockersclub.com/dow...n=category&id=5 Generic Utilities Downloads http://www.overclockersclub.com/dow...=category&id=10
  3. Ok guys i just thought i should add the links to the pin mod guide and unlocking guide for those not sure on which pins to connect for what Pin Mod guide http://www.ocinside.de/go_e.html?/h...amd_pinmod.html Unlocking by painting guide http://www.ocinside.de/go_e.html?/h...d_painting.html And if i am posting these unlocking links i might as well explain it before somone burns out their cpu and says I am responsible so here goes. In reality a chip can be overclocked on itself without the BIOS and for all of you out there with 2 chips lieing around out opf ur pc i advise you to take a look at the bridges on the chip and note differences. All athlon xp chips had the bridges in the same position but different ones were connected to make the chip stock at different multis and voltages. Now for example all thouroughbreds have 5 L3 bridges and these control the cpu's multiplier. A 1600xp will have its multi locked at 10.5 by having the L3 in the order "open, open, open, open, closed." This locks the chip at 10.5. A 1700xp will have its L3 bridges set up as "open, open, open, open, open." and that locks it at a 11 multi. The multis on these chips are only locked for the lower multis meaning that it will be at 11 but u can normally access higher multis and not the lower ones which are what most people want so they can set their FSB higher. Now it has been figured out somehow that no matter what the L3 bridges are set at, if you connect the number 5 L3 bridge it allows u access to the lower multis and this seems the way most people unlock the thoroughbreds. The polomino cores were unlocked by connecting all the L1 bridges. Before any of this unlocking took place amd's athlon thunderbird chips were out and people figured out by using a graphite pencil it was easy enough to connect the L1 bridges to unlock the multi for higher overclocks. But amd naturally caught on and started cutting laser holes between the bridges that werent factory connected to stop overclocking from taking place. These bridges are cut deep into the copper layer so if you were to connect the bridges using conductive paint it would kill the chip so
  4. overclockers started to fill these with non conductive substances. I heard crazy glue is a favourite and also crayola crayons are used. Now for connecting the bridges you need to buy some sort of conductive paint or a trace pen. Conductive paint is easily available from auto shops as window defogger repair kits which have silver in the paint. A common mistake is trying to use thermal compound grease such as artic silver but these are nonconductive so incase some gets spread over bridges while applying heat sinks. So not you know how things work you want to get to unlocking these chips. Well the link is posted for the guide and you know which bridges are to be connected. So first off if using crazy glue or super glue to fill in the laser holes you need to tape off the bridges so that crazy glue only gets in the laser pits then you need to use a rasor to trim it down flush. MAKE SURE NONE GETS ON THE BRIDGE CONTACTS!! Using the crayon is easier as you just colour over the bridges and use a pencil eraser to remove excess from around the bridges. So you got your pits filled and now you need to proceed to tape off only the bridge you want to connect using tape. After doing this you can put a drop of paint of use ur conductive pen to connect the 2 bridges. I read that if ur brave enough and have steady hands you can use a conductive pen to draw around the number L3 bridge pit to connect that bridge. Sort of using a C shape connection. The bridges connect pins at the base of your cpu so if ur not up to the whole painting the top then you can always try you luck at getting a thin piece of wire maybe from a telephone line and tieing a knot around the pins that need to be connected. Once again the guide shows which pins you would need to set certain voltages and multis. Lots of info is available with better pics and i will post some links of sites for yall but goodluck to all trying this. here is a link for unlocking the polominos http://www.cluboverclocker.com/guid...nlock/index.htm another polomino unlcking guide but with a video http://www4.tomshardware.com/column/20011124/ Here is one on unlcoking thoroughbreds http://www.overclockers.com.au/article.php?id=118669 And now just a usefull page on overclocking and unlocking athlons that some
  5. might enjoy looking at http://www.amdboard.com/ocspecial.html hey forgot to post the link for CPUFSB which allows you to change FSB in windows for those whose boards dont support much in the bios http://www.majorgeeks.com/download.php?det=420 This is Soft FSB for those looking for it. It works the same as CPUFSB and allows you to change ur FSB in windows http://www.voodoofiles.com/250 Now for some videocard overclocking program links.. ok this is powerstrip for general overclocking http://66.227.107.157/ps.htm radeon tweaker called rage 3d. Very opular for overclocking http://download.guru3d.com/pafiledb...ion=file&id=440 patch for 9500-9500 pro or 9700. This is the softmod patch http://download.guru3d.com/pafiledb...ion=file&id=563 to execute the above script you will need this which is another tweaker http://download.guru3d.com/pafiledb...ion=file&id=163 nvidia videocard tweaker claled nvhardpage http://download.guru3d.com/pafiledb...ion=file&id=163 this file is for emulating the quadro family of nvidia using a geforce 4 http://download.guru3d.com/pafiledb...ion=file&id=517 this is just a geforce tweak utility with no help files http://download.guru3d.com/pafiledb...ion=file&id=386
Đồng bộ tài khoản