intTypePromotion=1
zunia.vn Tuyển sinh 2024 dành cho Gen-Z zunia.vn zunia.vn
ADSENSE

Sổ tay thiết kế hệ thống cơ khí P6

Chia sẻ: No Va Va | Ngày: | Loại File: PDF | Số trang:19

91
lượt xem
15
download
 
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

6 Process Monitoring and Control of Machining Operations 6.1 6.2 6.3 Robert G. Landers University of Missouri at Rolla Introduction Force/Torque/Power Generation Cutting Force Models • Force/Torque/Power Monitoring • Force/Torque/Power Control Forced Vibrations and Regenerative Chatter Regenerative Chatter Detection • Regenerative Chatter Suppression 6.4 6.5 6.6 Tool Condition Monitoring and Control Tool Failure • Tool Wear A. Galip Ulsoy University of Michigan Other Process Phenomena Burr Formation • Chip Formation • Cutting Temperature Generation Richard J. Furness Ford Motor Company Future Direction and Efforts 6.1 Introduction Machining operations (e.g., drilling, milling) are shape transformation processes in which metal is removed from a stock of material to produce a part. The objective of these operations is to produce parts with...

Chủ đề:
Lưu

Nội dung Text: Sổ tay thiết kế hệ thống cơ khí P6

ADSENSE

CÓ THỂ BẠN MUỐN DOWNLOAD

 

Đồng bộ tài khoản
2=>2