The Plastic Product P2

Chia sẻ: Hai Dang | Ngày: | Loại File: PDF | Số trang:0

0
64
lượt xem
14
download

The Plastic Product P2

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

Are Special Fits with Matching Products Required? Often, certain dimensions of a product are specified with unnecessary close tolerances, when all the designer wanted to convey is that the product should fit suitably on another product (tightly or loosely), typically, a container and a matching lid. This requirement must be clear. Especially, when molding plastics with high shrinkage factors (e.g., PP or PE), it can be difficult to arrive at the proper “steel” dimensions, and some experimenting may be required to achieve the required fit. ...

Chủ đề:
Lưu

Nội dung Text: The Plastic Product P2

Đồng bộ tài khoản