Enterprise Manager is Oracle’s single, integrated solution for administering and
monitoring targets that are based on the Oracle technology stack. See "Certified
Enterprise Manager Targets" for a list of Oracle targets and components that Enterprise
Manager can manage. This guide is written for Oracle and system administrators who want to install and
configure Oracle Enterprise Manager. You should already be familiar with Oracle and
the administrative tasks you want to perform.
This chapter describes how to log into the CSS and configure an IP address,
subnet mask, and default route. Included in this chapter is a description of the
system software. It also contains information on using the Offline Diagnostic
Monitor (Offline DM) menu. Information in this chapter applies to all CSS
models except where noted.
CSS software is available in a Standard or Enhanced feature set.
This software configuration guide provides instructions for using the Cisco command-line interface (CLI) to configure features of the following Cisco 1800 series integrated services fixed-configuration routers: •Cisco 1801, Cisco 1802, and Cisco 1803 DSL Access Routers •Cisco 1811 and Cisco 1812 Ethernet Access Routers
This preface describes the intended audience, the organization of this guide, and the text and command conventions used throughout the guide. The preface includes the following topics:...
A site-to-site VPN protects the network resources on your protected networks from unauthorized use by
users on an unprotected network, such as the public Internet. The basic configuration for this type of
implementation has been covered in Chapter 6, “Configuring IPSec and Certification Authorities.” This
chapter provides examples of the following site-to-site VPN configurations:
Describe the components and operations of basic wireless LAN topologies. Describe the components and operations of basic wireless LAN security. Configure and verify basic wireless LAN access. Configure and troubleshoot wireless client access.
Summarize the operation of Ethernet as defined for 100/1000 Mbps LANs in the IEEE 802.3 standard. Explain the functions that enable a switch to forward Ethernet frames in a LAN. Configure a switch for operation in a network designed to support voice, video, and data transmissions. Configure basic security on a switch that will operate in a network designed to support voice, video, and data transmissions.
"Secure Router Configuration - IOS 15.1" aims at providing network security engineers with the knowledge and skills needed to secure Cisco IOS router based networks. Readers of this book will be able to secure the network environment using existing Cisco IOS Software features, as well as install and configure components of the Cisco IOS Software, such as zone-based policy firewall and Cisco IOS Intrusion Prevention System (IPS).
After installation is complete on your Red Hat Linux system, you still have some work
to do to customize the system to meet your needs. User accounts need to be set up,
filesystems must be configured, and additional packages may need to be added
In the preceding chapter, you gained an overview of routing protocols, including the
different types and their advantages and disadvantages. This chapter covers the basic
configuration of distance vector protocols, specifically the IP Routing Information
Protocol (RIP) and the Interior Gateway Routing Protocol (IGRP). It focuses on the basics
of these protocols; advanced configuration of these protocols is beyond the scope of this book.
However, by the end of the chapter, you’ll be able to configure routers running RIP and IGRP
that will route traffic in a network....
This chapter provides procedures for configuring the basic parameters of your Cisco router, including
global parameter settings, routing protocols, interfaces, and command-line access. It also describes the
default configuration on startup.Individual router models may not support every feature described throughout this guide. Features not
supported by a particular router are indicated whenever possible
Objectives: Configure a Basic Network Device, Verify and Test Network Connectivity. Background/Scenario: Cisco switches have a special interface, known as a switch virtual interface (SVI). The SVI can be configured with an IP address, commonly referred to as the management address that is used for remote access to the switch to display or configure settings.
Objectives: Build the Network and Configure Basic Device Settings, (Optional) Download TFTP Server Software, Use TFTP to Back Up and Restore the Switch Running Configuration, Use TFTP to Back Up and Restore the Router Running Configuration, Back Up and Restore Running Configurations Using Router Flash Memory, (Optional) Use a USB Drive to Back Up and Restore the Running Configuration.
Objectives: Set Up the Topology and Initialize Devices, Configure Devices and Verify Connectivity, Configure Router to Allow CCP Access, (Optional) Install and Set Up CCP on PC-A, Configure R1 Settings Using CCP, Use CCP Utilities.