Xem 1-20 trên 178 kết quả Basic switch
  • Objectives: Summarize the operation of Ethernet as defined for 100/1000 Mbps LANs in the IEEE 802.3 standard. Explain the functions that enable a switch to forward Ethernet frames in a LAN. Configure a switch for operation in a network designed to support voice, video, and data transmissions. Configure basic security on a switch that will operate in a network designed to support voice, video, and data transmissions.

    pdf80p thanhtung_hk 05-11-2010 75 29   Download

  • After studying this chapter you will be able to understand: Initial startup of the Catalyst Switch, initial bootup output from the Catalyst 2960 Switch, initial configuration of the Catalyst 2960 Switch using setup, logging in to the Switch and entering the privileged EXEC mode,...

    ppt19p youcanletgo_02 07-01-2016 7 1   Download

  • This book is designed to provide information about the Cisco CCNP Switching Exam #640-504. Every effort has been made to make this book as complete and as accurate as possible, but no warranty or fitness is implied. The information is provided on an “as is” basis. The author, Cisco Press, and Cisco Systems, Inc. shall have neither lia- bility nor responsibility to any person or entity with respect to any loss or damages arising from the information con- tained in this book or from the use of the discs or programs that may accompany it.

    pdf576p emilynguyen 08-08-2009 204 128   Download

  • For many years I have been a consultant for different companies and have written books on switch and router configurations and troubleshooting. During my years as a consultant I have had to either install, administer, or troubleshoot switching problems and configurations for switches without a good handbook. I have constantly gone through bookstores looking for a book on Cisco switch troubleshooting and configurations that didn’t deal with a Cisco curriculum. Guess what? I couldn’t find one!

    pdf411p mylinh 11-08-2009 105 31   Download

  • Objectives: Explain basic switching concepts. In this activity, you will indicate your knowledge of Ethernet technology by successfully comparing legacy to current standards. You will speculate on potential future Ethernet technology standards, and explain why MAC addresses and framing formats have stayed basically the same, in order to assist data transmission, during Ethernet’s evolution.

    doc2p kinhadthu 14-08-2015 9 3   Download

  • In this chapter: Explain the basic concepts of a switched environment, configure initial settings on a Cisco switch, configure switch ports to meet network requirements, configure the management switch virtual interface, describe basic security attacks in a switched environment, describe security best practices in a switched environment, configure the port security feature to restrict network access.

    pdf52p youcanletgo_01 29-12-2015 7 1   Download

  • ATM is a packet-switched technology based on a 53-byte packet called a cell. Each cell is divided into a 5-byte header and a 48-byte payload. The short, fixed length cell reduces delay and jitter, allowing time sensitive information such as voice and video to be transported along with data. There are various transmission media and rates available with bandwidth measured in megabits to gigabits.

    pdf44p emilynguyen 08-08-2009 144 61   Download

  • This book covers switching from the basics to advanced features, such as multilayer switching, as they pertain to Cisco's Catalyst products. Because of the rapidly changing Catalyst product line, I was unable to include all the latest products. However, I am sure that this is one of the most up-to-date reference materials available.

    pdf0p phongthinh 07-08-2009 124 55   Download

  • Summarize the operation of Ethernet as defined for 100/1000 Mbps LANs in the IEEE 802.3 standard. Explain the functions that enable a switch to forward Ethernet frames in a LAN. Configure a switch for operation in a network designed to support voice, video, and data transmissions. Configure basic security on a switch that will operate in a network designed to support voice, video, and data transmissions.

    pdf80p kienk6e 05-04-2011 76 28   Download

  • This chapter presents the basics of configuring the 1900 and 2950 Catalyst switches as well as Cisco routers. As you continue throughout this book, you will build upon these fundamental and important concepts for accessing, configuring, and managing your Cisco devices. I am making the assumption that you have never configured a Cisco device before and therefore will begin with the very basics by explaining the operating system that these devices use, the advantages that Cisco’s operating system provides, and how to use some basic operating system commands to configure your Cisco device....

    pdf71p vinhnghi 27-08-2009 82 25   Download

  • 1. STEPPER MOTOR SYSTEMS OVERVIEW Motion Control, in electronic terms, means to accurately control the movement of an object based on either speed, distance, load, inertia or a combination of all these factors. There are numerous types of motion control systems, including; Stepper Motor, Linear Step Motor, DC Brush, Brushless, Servo, Brushless Servo and more. This document will concentrate on Step Motor technology. In Theory, a Stepper motor is a marvel in simplicity. It has no brushes, or contacts.

    pdf13p thanhspktcdt10 23-03-2013 40 18   Download

  • Cable a network similar to the one in the diagram. The configuration output used in this lab is produced from a 2950 series switch. Any other switch used may produce different output. The following steps are to be executed on each switch unless specifically instructed otherwise. Instructions are also provided for the 1900 Series switch, which initially displays a User Interface Menu. Select the “Command Line” option from the menu to perform the steps for this lab. Start a HyperTerminal session. Note: Go to the erase and reload instructions at the end of this lab.

    pdf7p thanhha 27-08-2009 55 14   Download

  • Cisco LAN Switching Basics Switch Cisco có thể thực hiện các chức năng chi tiết trong chương này mà không cần cấu hình bất kỳ. Bạn có thể mua một số thiết bị chuyển mạch, bật sức mạnh, và cáp điện các thiết bị công trình chuyển đổi, và tất cả mọi thứ! Vì vậy, nếu các kỳ thi CCNA INTRO muốn kiểm tra bạn về những điều duy nhất bạn phải làm gì để chuyển đổi một để có được nó làm việc, bạn sẽ thậm chí không cần chương này.

    pdf30p doquyenhong 27-10-2011 57 14   Download

  • Bridges and switches are both layer-2 devices, functioning at the data link layer of the OSI Reference Model. Even though they are both layer-2 devices and have many similarities between them, they also have many differences. With advancements in hardware and technology, switches perform faster and have many more features. However, the basic functions of these two devices are the same. This chapter covers the functions of bridges and switches, the Spanning Tree Protocol (STP), and basic switch configuration tasks on Cisco’s Catalyst 1900 and 2950....

    pdf56p vinhnghi 27-08-2009 64 11   Download

  • Objectives: Configure a Basic Network Device, Verify and Test Network Connectivity. Background/Scenario: Cisco switches have a special interface, known as a switch virtual interface (SVI). The SVI can be configured with an IP address, commonly referred to as the management address that is used for remote access to the switch to display or configure settings.

    doc8p kinhadthu 14-08-2015 11 4   Download

  • Objectives: Set Up Devices in the Network as Shown in the Topology, Initialize the Router and Reload, Initialize the Switch and Reload.

    doc4p kinhadthu 14-08-2015 8 3   Download

  • Objectives: Set Up the Network Topology (Ethernet only), Configure PC Hosts, Configure and Verify Basic Switch Settings.

    doc14p kinhadthu 14-08-2015 11 3   Download

  • Spanning Tree Protocol is a fundamental protocol to prevent Layer 2 loops and at the same time provide redundancy in the network. This chapter covered the basic operation and configuration of RSTP and MST.

    ppt80p kiepnaybinhyen_02 29-12-2015 14 2   Download

  • This chapter summarize the operation of Ethernet as defined for 100/1000 Mbps LANs in the IEEE 802.3 standard; explain the functions that enable a switch to forward Ethernet frames in a LAN; configure a switch for operation in a network designed to support voice, video, and data transmissions.

    ppt29p youcanletgo_01 29-12-2015 4 1   Download

  • In this chapter: Describe the components and operations of basic wireless LAN topologies, describe the components and operations of basic wireless LAN security, describe the components and operations of basic wireless LAN security, configure and troubleshoot wireless client access.

    ppt21p youcanletgo_01 29-12-2015 6 1   Download

Đồng bộ tài khoản