Xem 1-20 trên 65 kết quả Configuring gateways
  • Upon completing this lesson, you will be able to: Verify the default configuration of the device, given a functioning access layer switch Configure the switch management IP address and the default gateway, given a functioning access layer switch and an IP addressing scheme Execute an add, move, or change on an access layer switch, given a new network requirement

    ppt26p trinhvang 25-01-2013 19 4   Download

  • Objectives of this chapter: Describe the background and history of Enhanced Interior Gateway Routing Protocol (EIGRP). Examine the basic EIGRP configuration commands and identify their purposes. Calculate the composite metric used by EIGRP. Describe the concepts and operation of DUAL.

    ppt59p xaydungk23 19-04-2016 5 2   Download

  • In this chapter, you will learn to: Describe the basic operation of EIGRP, plan and implement EIGRP routing, configure and verify EIGRP routing, configure and verify basic EIGRP in an enterprise WAN, configure and verify EIGRP authentication, describe and configure EIGRP optimization mechanisms; verify and troubleshoot the overall implementation.

    pdf175p youcanletgo_01 29-12-2015 4 1   Download

  • Chapter 6 objectives: Describe basic BGP terminology and operation, including EBGP and IBGP, configure basic BGP, verify and troubleshoot basic BGP, describe and configure various methods for manipulating path selection, describe and configure various methods for manipulating path selection.

    pdf205p youcanletgo_01 29-12-2015 5 1   Download

  • This chapter describe the features and operation of EIGRP, examine the different EIGRP packet formats, calculate the composite metric used by DUAL, describe the concepts and operation of DUAL, examine the commands to configure and verify basic EIGRP operations for IPv4 and IPv6.

    pdf53p youcanletgo_01 29-12-2015 8 1   Download

  • After completing this chapter, students will be able to: Describe the features and operation of EIGRP, examine the different EIGRP packet formats, calculate the composite metric used by DUAL, describe the concepts and operation of DUAL, examine the commands to configure and verify basic EIGRP operations for IPv4 and IPv6.

    pdf58p youcanletgo_01 04-01-2016 6 1   Download

  • Tham khảo tài liệu 'configuring a gateway to gateway vpn is easy using isa server', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    doc39p timgikhongbiet 29-05-2009 308 152   Download

  • Each workstation should be able to ping the attached router. If for some reason this is not the case, troubleshoot as necessary. Check and verify that the workstation has been assigned a specific IP address and default gateway. If running Windows 98, check using Start Run winipcfg. If running Windows 2000 or higher, check using ipconfig in a DOS window.

    pdf7p laquang 03-09-2009 118 35   Download

  • A DHCP client uses IP broadcasts to find the DHCP server. However, these broadcasts are not forwarded by routers, so in the case of the remote LAN, the workstations will not be able to locate the DHCP server. The router must be configured with the ip helper-address command to enable forwarding of these broadcasts, as unicast packets, to the specific server. Routing between the remote router and the campus router is done using a static route between the remote router and gateway router, and a default route between the gateway router and remote router....

    pdf6p thanhha 27-08-2009 106 29   Download

  • The ISP has allocated a company the public classless interdomain routing (CIDR) IP address 199.99.9.32/27. This is equivalent to 30 public IP addresses. Since the company has an internal requirement for more than 30 addresses, the IT manager has decided to use NAT. Addresses 199.99.9.33 – 199.99.9.39 will be reserved for static allocation and 199.99.9.40 – 199.99.9.62 for dynamic allocation. Routing between the ISP and the gateway router will be done using a static route between the ISP and the gateway, and a default route between the gateway and the ISP.

    pdf7p thanhha 27-08-2009 116 26   Download

  • As internetworks grew in scale and diversity in the early 1990s, new routing protocols were needed. Cisco developed Enhanced Interior Gateway Routing Protocol (IGRP) primarily to address many of the limitations of IGRP and RIP. As WANs were growing, so was the need for a routing protocol that would use efficient address space on WAN links, as well as the LAN networks. OSPF was available, but the CPU-intensive tasks that it had to perform often overloaded the small processors of many edge or remote routers of that time. The configuration was also more complex than that of RIP or IGRP.

    pdf1p thutrang 28-08-2009 130 25   Download

  • Routing between the ISP and the campus router uses a static route between the ISP and the gateway, and a default route between the gateway and the ISP. The ISP connection to the Internet is identified by a loopback address on the ISP router.

    pdf6p laquang 03-09-2009 86 25   Download

  • An ISP has allocated a company the public classless interdomain routing (CIDR) IP address 199.99.9.32/27. This is equivalent to 30 public IP addresses. Since the company has an internal requirement for more than 30 addresses, the IT manager has decided to implement NAT. The addresses 199.99.9.33 – 199.99.9.39 for static allocation and 199.99.9.40 – 199.99.9.62 for dynamic allocation. Routing will be done between the ISP and the gateway router used by the company.

    pdf7p thanhha 27-08-2009 64 24   Download

  • The ISP has allocated a company the public CIDR IP address 199.99.9.32/30. This is equivalent to 4 public IP addresses. Since the company has an internal requirement for more than 30 addresses, the IT manager has decided to use NAT with PAT. Routing between the ISP and the gateway router is done using a static route between the ISP and the gateway, and a default route between the gateway and the ISP. The ISP connection to the Internet will be represented by a loopback address on the ISP router.

    pdf7p thanhha 27-08-2009 103 23   Download

  • Cisco IP Telephony Part 1 (CIPT1) v4.1 prepares you for installing, configuring, and maintaining a Cisco IP telephony solution. This course focuses primarily on Cisco CallManager, the call routing and signaling component for the Cisco IP telephony solution. This course includes lab activities in which you will perform postinstallation tasks and configure Cisco CallManager; configure gateways, gatekeepers, and switches; and build route plans to place intra- and intercluster Cisco IP Phone calls.

    pdf158p dieutan 17-05-2010 92 23   Download

  • Routing between the ISP and the campus router uses a static route between the ISP and the gateway, and a default route between the gateway and the ISP. The ISP connection to the Internet is identified by a loopback address on the ISP router. Cable a network similar to the one in the diagram above. Any router that meets the interface requirements displayed on the above diagram may be used. This includes the following and any of

    pdf6p thanhha 27-08-2009 85 17   Download

  • Aidan McDonald has just received a DSL line Internet connection to a local ISP in his home. The ISP has allocated only one IP address to be used on the serial port of his remote access device. Routing between the ISP and the home router is done using a static route between the ISP and the gateway routers, and a default route between the gateway and the ISP routers. The ISP connection to the Internet will be represented by a loopback address on the ISP router.

    pdf6p thanhha 27-08-2009 57 12   Download

  • Physical server that hosts VSX virtual networks, including all virtual devices that provide the functionality of physical network devices. The Security Gateway or a Multi-Domain Security Management Domain Management Server used by administrators to manage the VSX virtual network and and its security policies.

    pdf205p hoangtumayman 26-09-2011 59 12   Download

  • Platform Builder provides you with several different vertical device configurations ranging from a Residential Gateway that features only the kernel functionality to a Media Appliance configuration that includes many graphical features and many applications.

    pdf32p thuxuan 07-08-2009 57 10   Download

  • Dynamic Host Configuration Protocol (DHCP) provides a means of allocating and managing IP addresses dynamically over a network. Before the advent of DHCP, administrators configured each host on a network with an IP address, subnet mask, and default gateway. Maintaining the changes and the logs of the changes took a tremendous amount of time and was prone to error. DHCP uses a client/server model in which the network information is maintained and updated dynamically by the system.

    pdf248p vinhnghi 17-08-2009 49 8   Download

Đồng bộ tài khoản