Xem 1-20 trên 65 kết quả Engineering facility
  • This is a comprehensive, problem-solving engineering guide on the strategic planning, development, and maintenance of public and private transportation systems. Covering all modes of transportation on land, air, and water, the Handbook shows how to solve specific problems, such as facility improvement, cost reduction, or operations optimization at local, regional, national, and international levels.

    pdf937p kennybibo 14-07-2012 88 34   Download

  • UFC are living documents and will be periodically reviewed, updated, and made available to usersas part of the Services' responsibility for providing technical criteria for military construction.Headquarters, U.S. Army Corps of Engineers (HQUSACE), Naval Facilities Engineering Command(NAVFAC), and Air Force Civil Engineer Support Agency (AFCESA) are responsible foradministration of the UFC system. Defense agencies should contact the preparing service fordocument interpretation and improvements. Technical content of UFC is the responsibility of thecognizant DoD working group.

    pdf277p kennybibo 14-07-2012 31 7   Download

  • UNIFIED FACILITIES CRITERIA (UFC) OPERATION AND MAINTENANCE: MAINTENANCE OF PETROLEUM SYSTEMS Any copyrighted material included in this UFC is identified at its point of use. Use of the copyrighted material apart from this UFC must have the permission of the copyright holder.

    pdf156p khangoc239 10-08-2012 28 3   Download

  • Tham khảo sách 'unified facilities criteria (ufc) power plant acousticsapproved for', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf96p khangoc2392 12-08-2012 18 3   Download

  • The Idaho National Engineering and Environmental Laboratory (INEEL), through the U.S. Department of Energy (DOE), has proposed that a large-scale wind test facility (LSWTF) be constructed to study, in full-scale, the behavior of low-rise structures under simulated extreme wind conditions. To determine the need for, and potential benefits of, such a facility, the Idaho Operations Office of the DOE requested that the National Research Council (NRC) perform an independent assessment of the role and potential value of an LSWTF in the overall context of wind engineering research.

    pdf49p bunmang_1 03-05-2013 15 3   Download

  • Tham khảo sách 'unified facilities criteria (ufc) operation and maintenance:', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf156p khangoc2391 11-08-2012 19 2   Download

  • Tham khảo sách 'unified facilities criteria (ufc)power plant acoustics approved', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf96p louisxlll4 27-12-2012 14 2   Download

  • Chapter 3 - Basing software development on reusable technology. In this chapter you will learn about the following: Frameworks, reusable software subsystems that implement important facilities which many applications can use; the client–server architecture, an important way of designing programs in which the software is divided into two main parts: a client program which runs on each user’s computer, and a server program with which each user’s client communicates in order to obtain services; a client–server framework written in Java.

    ppt48p tangtuy06 01-04-2016 3 1   Download

  • HEATING, VENTILATING, AND AIR CONDITIONING ECONOMICS OF INTERIOR CLIMATE CONTROL 16.2 Equations for Heating, Ventilation, and Air-Conditioning Calculations Required Capacity of a Unit Heater Determining Cooling-Tower Fan Horsepower Requirements 16.12 Choosing an Ice Storage System for Facility Cooling 16.13 Annual Heating and Cooling Energy Loads and Costs 16.22 Heat Recovery Using a Run-Around System of Energy Transfer 16.24 Rotary Heat Exchanger Energy Savings 16.26 Savings from ‘‘Hot-Deck’’ Temperature Reset 16.28 Air-to-Air Heat Exchanger Performance 16.

    pdf144p phuphong 09-12-2009 145 63   Download

  • PLUMBING AND DRAINAGE FOR BUILDINGS AND OTHER STRUCTURES FACILITIES PLANNING AND LAYOUT 15.1 Water-Meter Sizing and Layout for Plant and Building Water Supply 15.1 Pneumatic Water Supply and Storage Systems 15.8 Selecting and Sizing Storage-Tank Hot-Water Heaters 15.11 Sizing Water-Supply Systems for High-Rise Buildings 15.14 PLUMBING-SYSTEM DESIGN 15.23 Determination of Plumbing-System Pipe Sizes 15.23 Design of Roof and Yard Rainwater Drainage Systems 15.29 Sizing Cold- and Hot-Water-Supply Piping 15.32 Sprinkler-System Selection and Design 15.

    pdf62p phuphong 09-12-2009 86 31   Download

  • The Center for Chemical Process Safety (CCPS) has issued a number of Guidelines aimed at the evaluation and mitigation of risks associated with catastrophic events in facilities handling chemicals. The purpose of this book is to shift the emphasis on process safety to the earliest stages of the design where process safety issues can be addressed at the lowest cost and with the greatest effect.

    pdf40p lyacau 30-12-2009 74 18   Download

  • This manual implements Air Force Policy Directive (AFPD) 32-10, Installations and Facilities, by providing guidance for base and command liquid fuels maintenance (LFM) personnel with guide procedures for field maintenance of permanently installed Air Force-owned, -leased, or -controlled petroleum storage and dispensing systems. It also supplements detailed manufacturers’ instructions on specific equipment and applies to all Air Force systems and activities for which the civil engineer (CE) has maintenance responsibility....

    pdf156p kennybibo 14-07-2012 42 11   Download

  • The maintenance of road pavements in England has become a costly necessity, due largely to the large volume of commercial vehicles using the roads which cause pavements to deteriorate quickly, and makes their repair more difficult to carry out. These roadworks incur not only direct works costs, but also indirect costs from factors such as congestion, motor accidents and pollution. There is obviously a need for cost-effective maintenance that minimises the occurrence and duration of these disruptions.

    pdf381p ngocdbk50 25-03-2013 35 11   Download

  • This book presents the selection of various high level contributions involving thermodynamics. The book goes from the fundamentals up to several applications in different scientific fields. The content of the book has been classified in six sections: Classical Thermodynamics, Statistical Thermodynamics, Property Prediction in Thermodynamics, Material and Products, Non Equilibrium and Thermodynamics in Diverse Areas. The classification of the book aims to provide to the reader the facility of finding the desired topic included in the book.

    pdf554p cucdai_1 19-10-2012 28 10   Download

  • In 1994, in response to an Administrative Consent Order with the Department of Environmental Protection, MassHighway began a comprehens ive environmental compliance initiative at its maintenance facilities. At the outset, the Department performed a gap analysis to evaluate MassHighway’s management structure and to determine the level of environmental compliance. The gap analysis concluded that a significant financial and personnel investment was needed to correct violations of regulatory requirements and to provide a method to ensure on-going compliance.

    pdf0p nhulan0908 29-09-2012 36 9   Download

  • The Center for Chemical Process Safety (CCPS) has issued a number of Guidelines aimed at the evaluation and mitigation of risks associated with catastrophic events in facilities handling chemicals. The purpose of this book is to shift the emphasis on process safety to the earliest stages of the design where process safety issues can be addressed at the lowest cost and with the greatest effect.

    pdf30p hiruscar 13-10-2010 37 8   Download

  • Landfills are excavated or engineered sites where non-liquid hazardous waste is deposited for final disposal and covered. These units are selected and designed to minimize the chance of release of hazardous waste into the environment. Design standards for hazardous waste landfills require a double liner; double leachate collection and removal systems (LCRS); leak detection system; run on, runoff, and wind dispersal controls; construction quality assurance (CQA) program. Liquid wastes may not be placed in a hazardous waste landfill.

    pdf0p chipmoon 19-07-2012 30 8   Download

  • Energy and human life are closely liked. Civilization, present and future, depends on energy to provide the facilities the human race needs. The world being created today will determine the outcome of a number of issues and conflicting demands, which we only now beginning to identify. Whilst their resolution will fashion the future world, the immediate challenge is to provide enough energy, water and food, to raise the standard of living of the ever-increasing world population without “imperiling our irreplaceable environment”....

    pdf414p ktcn_1 10-07-2012 29 7   Download

  • One redundant characteristic of dismantling operations of nuclear facilities is the lack of exhaustive and accurate data relating to the actual state of the facilities. Most of the time the harsh working conditions (heat, dust, radiological contamination...) are rated far too severe for human workers to carry out the work. As a consequence robots are set to take over from human staff. It is necessary to use flexible, powerful and remotely-operated manipulator arms that are fitted with specially-designed processes and tools for cutting, handling and cleaning-up....

    pdf0p ktcn_1 17-07-2012 42 7   Download

  • Representing nearly fifty years of cooperation between Wiley and the Structural Stability Research Council, the Guide to Stability Design Criteria for Metal Structures is often described as an invaluable reference for practicing structural engineers and researchers. For generations of engineers and architects, the Guide has served as the definitive work on designing steel and aluminum structures for stability.

    pdf96p chipmoon 25-08-2012 31 7   Download

Đồng bộ tài khoản