Interlaminar

Xem 1-20 trên 34 kết quả Interlaminar
  • Spring Designer’s Handbook, Harold Carlson Computer-Aided Graphics and Design, Daniel L. Ryan Lubrication Fundamentals, J. George Wills Solar Engineering for Domestic Buildings, William A. Himmelman Applied Engineering Mechanics: Statics and Dynamics, G. Boothroyd and C. Poli Centrifugal Pump Clinic, Igor J. Karassik Computer-Aided Kinetics for Machine Design, Daniel L. Ryan Plastics Products Design Handbook, Part A: Materials and Components; Part B: Processes and Design for Processes, edited by Edward Miller Turbomachinery: Basic Theory and Applications, Earl Logan, Jr.

    pdf753p khangoc239 10-08-2012 40 13   Download

  • The last edition of the Handbook was published in 1994 and like all the earlier editions, it aimed to provide a practical reference book for all those involved in making castings in any of the commonly used alloys by any of the usual moulding methods. In order to keep the Handbook to a reasonable size, it was not possible to deal with all the common casting alloys in detail. Since 1994 the technology of casting has continued to develop and has become more specialised so that it has been decided to publish the 11th edition of the Handbook in three...

    pdf309p khangoc239 10-08-2012 35 9   Download

  • Tham khảo sách 'machinery's handbook guide - 28th edition (malestrom)', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf0p khangoc2394 25-08-2012 43 9   Download

  • Fiber composite technology is based on taking advantage of the high strength and high stiffness of fibers, which are combined with matrix materials of similar/ dissimilar natures in various ways, creating inevitable interfaces. In fiber composites, both the fiber and the matrix retain their original physical and chemical identities, yet together they produce a combination of mechanical properties that cannot be achieved with either of the constituents acting alone, due to the presence of an interface between these two constituents.

    pdf422p khangoc239 10-08-2012 24 8   Download

  • Tham khảo sách 'engineering fundamentals of the internal combustion engine', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf425p khangoc2391 11-08-2012 34 7   Download

  • Previously, many of the unenlightened manufacturing companies, having purchased an expensive and sophisticated new machine tool, considered cutting tool technology as very much an afterthought and supplied little financial support, or technical expertise to purchase these tools. Today, tooling-related technologies are treated extremely seriously, as it is here that optimum production output, consistency of machined product and value-added activities are realised.

    pdf31p khangoc2394 25-08-2012 20 6   Download

  • Gulf Professional Publishing is an imprint of Elsevier 30 Corporate Drive, Suite 400, Burlington, MA 01803, USA Linacre House, Jordan Hill, Oxford OX2 8DP, UK Copyright © 2006, Elsevier Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher.

    pdf673p khangoc2392 12-08-2012 19 5   Download

  • Library of Congress Cataloging-in-Publication Data Lyshevski, Sergey Edward. Nano- and microelectromechanical systems : fundamentals of nano- and microengineering / Sergey Edward Lyshevski. p. cm. -- (Nano- and microscience, engineering, technology, and medicine series) Includes index. Includes bibliographical references and index. ISBN 0-8493-916-6 (alk. paper) 1. Microelectromechanical systems. 1. Title. II. Series. This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. A wide...

    pdf241p khangoc2393 13-08-2012 11 5   Download

  • ‘Fly-cut milling’ , is the exception here, as it is considered a milling operation that will normally utilise only one cutting edge, it is similar in design and operation to that of a two-cutting edged trepanning tool. A ‘fly-cutter’ is

    pdf32p khangoc2394 25-08-2012 40 5   Download

  • ARC WELDING can be hazardous. This document contains general information about the topics discussed herein. This document is not an application manual and does not contain a complete statement of all factors pertaining to those topics. This installation, operation, and maintenance of arc welding equipment and the employment of procedures described in this document should be conducted only by qualified persons in accordance with applicable codes, safe practices, and manufacturer’s instructions. Always be certain that work areas are clean and safe and that proper ventilation is used.

    pdf28p khangoc2391 11-08-2012 17 4   Download

  • First published by Iliffe & Sons 1929 Eighth edition 1966 Ninth edition 1972 Tenth edition published by Butterworths 1983 Eleventh edition 1989 Twelfth edition 1996 Reprinted 1997 Thirteenth edition 2001 © Reed Educational and Professional Publishing Ltd 2001 All rights reserved. No part of this publication may be reproduced in any material form (including

    pdf1188p khangoc2392 12-08-2012 8 4   Download

  • Tham khảo sách 'io verview of mechatronics1 what is mechatronics robert h. bishop and m. k. ramasubramanian', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf0p khangoc2392 12-08-2012 15 4   Download

  • This book is printed on acid-free paper. Headquarters Marcel Dekker, Inc. 270 Madison Avenue, New York, NY 10016 tel: 212-696-9000; fax: 212-685-4540 Eastern Hemisphere Distribution Marcel Dekker AG Hutgasse 4, Postfach 812, CH-4001 Basel, Switzerland tel: 41-61-261-8482; fax: 41-61-261-8896 World Wide Web http://www.dekker.com The publisher offers discounts on this book when ordered in bulk quantities. For more information, write to Special Sales/ Professional Marketing at the headquarters address above. Copyright # 2000 by Marcel Dekker, Inc. All Rights Reserved.

    pdf857p khangoc2393 13-08-2012 23 4   Download

  • Tham khảo sách 'lego mindstorms building robots', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf658p khangoc2393 13-08-2012 23 4   Download

  • This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE93012224 .

    pdf0p khangoc2394 25-08-2012 23 4   Download

  • First published 2000 © David Hoyle 2000 All rights reserved. No part of this publication may be reproduced in any material form (including photocopying or storing in any medium by electronic means and whether or not transiently or incidentally to some other use of this publication) without the written permission of the copyright holder except in accordance with the provisions of the Copyright, Designs and Patents Act 1988 or under the terms of a licence issued by the Copyright Licensing Agency Ltd, 90 Tottenham Court Road, London, England W1P 9HE.

    pdf592p khangoc2391 11-08-2012 12 3   Download

  • First published by Iliffe Books Ltd 1966 Second edition 1969 Reprinted 1970 Third edition 1975 Reprinted with revisions 1977 Reprinted 1979 Fourth edition published by Butterworth-Heinemann 1982 Reprinted 1985 Fifth edition 1989 Reprinted 1991, 1993 Sixth edition 1995 Reprinted 1995, 1996, 1998 Seventh edition 1999 0 J. A. Brydson 1995, 1999 All rights reserved. No part of this publication may be reproduced in any material form (including photocopying or storing in any medium by electronic means and whether or not...

    pdf954p khangoc2391 11-08-2012 19 3   Download

  • Tham khảo sách 'tribology in machine design ii', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf0p khangoc2392 12-08-2012 16 3   Download

  • Tham khảo sách 'electroactive polymers for robotic applications kwang j. kim and satoshi tadokoro', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf287p khangoc2393 13-08-2012 13 3   Download

  • Tham khảo sách 'robotics handbook of computer vision algorithms in image algebra', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf384p khangoc2393 13-08-2012 15 3   Download

CHỦ ĐỀ BẠN MUỐN TÌM

Đồng bộ tài khoản