The information in this guide applies to the following ASA 5500 series adaptive security appliance
models: ASA 5505, ASA 5510, ASA 5520, ASA 5540, and ASA 5550. In this guide, references to
“Cisco ASA 5500 series adaptive security appliance” and “adaptive security appliance” apply to all models
unless specifically noted otherwise.
Persons supervising and performing the electrical installation or maintenance of a drive and/or an external Option Unit must be suitably qualified and competent in these duties. They should be given the opportunity to study and if necessary to discuss this User Guide before work is started. The voltages present in the drive and external option units are capable of inflicting a severe electric shock and may be lethal. The Stop function of the drive does not remove dangerous voltages from the terminals of the drive and external Option Unit.
When you itemize charges for conceptual services/preliminary art and finished art, your charges for the preliminary
art are generally not taxable and your charges for the tangible finished art are generally taxable. The charge for the
finished art should reasonably reflect the cost of creating the artwork plus a markup for profit.
Before installing and commissioning the converter, make sure that you read all the safety notes and warnings carefully, including the warning labels on the equipment itself. The warning labels must always be legible. Missing or damaged labels must be replaced.
This sample document is provided for instructional purposes only. CCC is not rendering advice concerning any commission project or practices. This document is neither approved nor intended to serve as a standard form. The user of these documents should confer with qualified advisors with respect to its commissioning and other documentation.
Some reciprocating open-type compressors used with water cooled systems
incorporate a cylinder head cooling feature in the form of a water circuit
through the compressor head. Supply water enters this before entering the
condenser (see Figure 16).
A rapid indicating thermometer is recommended for taking water temper-
atures because the water regulating valve responds to the operating head
pressure and will vary the temperature of the water as it modulates. It is
also necessary, when adjusting the water regulator, to be able to take inlet and
outlet temperatures quickly.
Note The application examples are not binding and do not claim to be complete regarding configuration, equipment and any eventuality. The application examples do not represent customer-specific solutions. They are only intended to provide support for typical applications. You are responsible for ensuring that the described products are used correctly. These application examples do not relieve you of the responsibility to use sound practices in application, installation, operation and maintenance....
Fundamental Requirements of Effective Preventive/Predictive Maintenance
could eliminate almost 98% of the failures. Note the word “proper,” meaning that no new problems are injected. That also means, however, that costs will be higher than need be since components will be replaced before the end of their useful life, and more labor is required. Once the threshold set point has been determined, it should be monitored to detect when it is exceeded. The investment in monitoring depends on the period over which deterioration may occur, means of detection, and beneﬁt value.
The recommendations and principles from Agenda 21 cover water resources
management in general, i.e. including availability of water, demand regulation, supply
and tariffs, whereas water pollution control should be considered as a subset of water
resources management. Water resources management entails two closely related
elements, that is the maintenance and development of adequate quantities of water of
adequate quality (see Case Study V, South Africa). Thus, water resources management
cannot be conducted properly without paying due attention to water quality aspects.
Types and meanings of warnings
In all stages of the installation, operation, maintenance and check of this equipment, reference must be made to this manual and other related documents. The correct understanding of the equipment, information about safety and other related instructions are essential for this system. Cautionary indications DANGER and CAUTION are used in this manual to point out particular hazards and to highlight some unusual information which must be specially noted.
Application-Level Failover and Disaster Recover y in a Hyper-V Environment
12. When the node resumes operation, if necessary move the groups to this node and perform the maintenance tasks on the remaining nodes in the cluster. 13. After completing the maintenance tasks on all the failover cluster nodes, close Failover Cluster Management and log off of the server.
Removing Nodes from a Failover Cluster
Cluster nodes can be removed from a cluster for a number of reasons, and this process can be accomplished quite easily.
Machinery madam or madame? (not -ary) Use MADAM:
" as a polite term of respect: Can I help you, madam? " in letter writing: Dear Madam (note capital letter) " as a formal title of respect: Thank you, Madam Speaker (note capital letter)
Use MADAME as the French equivalent:
" We are going to Madame Tussaud’s. " The famous French physicist, Madame Curie, was born in Poland.
magic -e mahogany maintain maintenance manageable manager mango (singular) manoeuvre mantelpiece mantelshelf margarine
In considering IT infrastructure, it should be noted
that there is no such ideal as a standard computer
installation. In some organisations, IT hardware may
be located in a purpose built computer centre, where
responsibility for its operation and maintenance is in
the hands of specialist personnel, such as computer
operators, systems programmers and operations