# Manufacturing methods

Xem 1-20 trên 162 kết quả Manufacturing methods
• ### HANDBOOK OF SMALL ELECTRIC MOTORS

Electric motors convert electrical energy into mechanical energy by utilizing the properties of electromagnetic energy conversion. The different types of motors operate in different ways and have different methods of calculating the performance, but all utilize some arrangement of magnetic fields. Understanding the concepts of electromagnetics and the systems of units that are employed is essential to understanding electric motor operation.The first part of this chapter covers the concepts and units and shows how forces are developed.

• ### Handbook of the Food Process Design

Generally, a process is defined as a sequence of events that transforms the biological materials of food products, via biochemical changes, into stable forms with added value. This can create new products or modify existing ones. Process design refers to the design of food processes and manufacturing methods, while plant design refers to the design of the whole processing plant. The processing of food is no longer as simple or straightforward as in the past. Food process design is an interdisciplinary science that is highly regarded by the food industry.

• ### NONDESTRUCTIVE TESTING METHODS AND NEW APPLICATIONS

The Nondestructive testing science is a broad field that covers variety of testing methods and applications, in addition to the associated pre and post processing mathematics. In terms of methods and techniques the Nondestructive testing modalities rely on different physical phenomena such as the electromagnetism, the acoustic emission, the thermal emission and the penetration of high-energy radiation through materials and structures.

• ### Fundamentals of Digital Manufacturing Science

In this era of knowledge economy, digital manufacturing as a new manufacturing technology and manufacturing mode has become a strong manufacturing power, promoting the development of manufacturing in the 21st century.

• ### Numerical Methods for Nonlinear Variational Problems

Many mechanics and physics problems have variational formulations making them appropriate for numerical treatment by finite element techniques and efficient iterative methods. This book describes the mathematical background and reviews the techniques for solving problems, including those that require large computations such as transonic flows for compressible fluids and the Navier-Stokes equations for incompressible viscous fluids.

• ### Computer-Aided.Design.Engineering.and.Manufacturing P3

Process planning was traditionally considered as manufacturing preparation that provides manufacturing methods and operation instructions. When computer aided process planning (CAPP) was first attempted in the early 1960s [Neibel, 1965; Schenk, 1966], it emerged as a vital link between computer aided design (CAD) and computer aided manufacturing (CAM). Today process planning has become an important part in computer integrated manufacturing (CIM) environment [Zhang and Alting, 1993; Larsen, 1993; Gulesin and Jones, 1994]....

• ### Particle Characterization: Light Scattering Methods

The importance of particle characterization in both the research and development, and the manufacture and quality control of materials and products that we use in our everyday lives is, in some sense, invisible to those of us not directly involved with these activities. Few of us know how particle size, shape, or surface characteristics can influence, for example, the efficacy of a painreliever, or the efficiency of a catalytic converter, or the resolution of a printer.

• ### The Finite Element Method Fifth edition Volume 3

Tham khảo sách 'the finite element method fifth edition volume 3', kỹ thuật - công nghệ, tự động hoá phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

• ### THE MANUFACTURING PROCESS

Assembling electrical and mechanical parts is a costly and error-prone step in the process of making electronic devices. The Fab@Home team at Cornell is pursuing the holy grail of personal fabrication, the ability to manufacture, on a single 3D printer machine in a single “print job,” an object that contains a battery, actuators, sensors, and a physical “body.” In other words… a robot.

• ### handling and preservation of fruits and vegetables by combined methods for rural areas

Tham khảo sách 'handling and preservation of fruits and vegetables by combined methods for rural areas', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

• ### Metric Dimensions and Sections Properties

HSS Manufacturing Methods The transformation of steel strip into hollow structural sections (HSS) is the result of operations including forming, welding and sizing. Currently three methods are being used in North America for the manufacture of HSS. These methods, including two ERW methods and an SAW method, are described below. Both ERW methods meet ASTM A 500 and CSA G-40.21 requirements for the manufacture of HSS, and the ERW sizes included in this publication may be produced to either standard. The SAW method is not included as a manufacturing process in the ASTM or CSA specification.

• ### Principles of Digital Design

This book is designed to facilitate a thorough understanding of fundamental principles without requiring readers to memorize an excess of confusing technological details. Rather than focusing on techniques for one particular phase of design, it covers the complete design process, from specification to manufacturing

• ### HANDBOOK OF DIE DESIGN

In today’s practical and cost-conscious world, sheet-metal parts have already replaced many expensive cast, forged, and machined products. The reason is obviously the relative cheapness of stamped, or otherwise mass-produced parts, as well as greater control of their technical and aesthetic parameters. That the world slowly turned away from heavy, ornate, and complicated shapes, and replaced them with functional, simple, and logical forms only enhanced this tendency. Remember old bathtubs? They used to be cast and had ornamental legs.

• ### Automating Manufacturing Systems with PLCs P1

Control engineering has evolved over time. In the past humans were the main method for controlling a system. More recently electricity has been used for control and early electrical control was based on relays. These relays allow power to be switched on and off without a mechanical switch. It is common to use relays to make simple logical control decisions. The development of low cost computer has brought the most recent revolution, the Programmable Logic Controller (PLC). The advent of the PLC began in the 1970s, and has become the most common choice for manufacturing controls....

• ### Handbook of Food Process Design

Generally, a process is defi ned as a sequence of events that transforms the biological materials of food products, via biochemical changes, into stable forms with added value. This can create new products or modify existing ones. Process design refers to the design of food processes and manufacturing methods, while plant design refers to the design of the whole processing plant. The processing of food is no longer as simple or straightforward as in the past. Food process design is an interdisciplinary science that is highly regarded by the food industry.

• ### INSTALLATION GUIDE

This document provides the information needed to design a TrueNet Certified Cabling System. The Design Guidelines are intended for use by designers with a working knowledge of structured cabling systems design. The Design Guidelines are part of a series of documents supporting the design, installation, and use of a TrueNet Certified Cabling System. KRONE reserves the right, without notice, to change its products as progress in engineering or manufacturing methods or other circumstances may warrant....

• ### Managerial and Cost Accounting

Early portions of this textbook dealt mostly with financial accounting. Financial accounting is concerned with reporting to external parties such as owners, analysts, and creditors. These external users rarely have access to the information that is internal to the organization, nor do they specify the exact information that will be presented. Instead, they must rely on the general reports presented by the company. Therefore, the reporting structure is well defined and standardized.

• ### Biopolymers

Biopolymers are polymers produced by living organisms. Cellulose, starch, chitin, proteins, peptides, DNA and RNA are all examples of biopolymers. This book comprehensively reviews and compiles information on biopolymers in 30 chapters. The book covers occurrence, synthesis, isolation and production, properties and applications, modification, and the relevant analysis methods to reveal the structures and properties of some biopolymers.

• ### The energy technology perspective

Human ancestors have been using stone and other tools since long before the emergence of Homo sapiens approximately 200,000 years ago.[20] The earliest methods of stone tool making, known as the Oldowan "industry", date back to at least 2.3 million years ago,[21] with the earliest direct evidence of tool usage found in Ethiopia within the Great Rift Valley, dating back to 2.5 million years ago.[22] This era of stone tool use is called the Paleolithic, or "Old stone age", and spans all of human history up to the development of agriculture approximately 12,000 years ago....