# Performance criteria

Xem 1-20 trên 102 kết quả Performance criteria
• ### Hans P. Geering Optimal Control with Engineering Applications

This book introduces a variety of problem statements in classical optimal control, in optimal estimation and filtering, and in optimal control problems with non-scalar-valued performance criteria. Many example problems are solved completely in the body of the text. All chapter-end exercises are sketched in the appendix. The theoretical part of the book is based on the calculus of variations, so the exposition is very transparent and requires little mathematical rigor.

• ### Performance Criteria

PERCENT REGULATION There are a number of ways to deﬁne performance, such as servo bandwidth, accuracy, regulation, etc. Percent regulation, for machine servo drives, can be deﬁned as how much the controlled variable of a servo will reduce as load is applied to the servo. As such, percent regulation is usually applied to type 0 velocity regulators to describe how well the output velocity will be maintained as load is applied to the output of the drive. Percent regulation is often given as the equation Percent regulation ¼ no load speed À full load speed full load speed...

• ### Lecture Fundamentals of control systems: Chapter 5 - TS. Huỳnh Thái Hoàng

Lecture "Fundamentals of control systems - Chapter 5: Analysis of control system performance" presentation of content: Performance criteria, steady state error, transient response, the optimal performance index,... Invite you to reference.

• ### Fuzzy Control

Fuzzy control is a practical alternative for a variety of challenging control applications since it provides a convenient method for constructing nonlinear controllers via the use of heuristic information. Such heuristic information may come from an operator who has acted as a “human-in-the-loop” controller for a process. In the fuzzy control design methodology, we ask this operator to write down a set of rules on how to control the process, then we incorporate these into a fuzzy controller that emulates the decision-making process of the human.

• ### FUZZY CONTROLLERS – RECENT ADVANCES IN THEORY AND APPLICATIONS

Fuzzy control theory is an emerging area of research. At the core of many engineering problems is the problem of control of different systems. These systems range all the way from classical inverted pendulum to auto-focusing system of a digital camera. Fuzzy control systems have demonstrated their enhanced performance in all these areas.

• ### Assessing The Performance Of Mortality Prediction Models

Concerns about the cost and quality of health care have resulted in a national effort to determine the health outcomes of medical and surgical services. This report concentrates on developing criteria that risk-assessment systems should meet to permit consumers to intelligently evaluate them. It also presents a comparison of several selected mortality prediction models.......

• ### Báo cáo khoa học: "Improving Language Model Size Reduction using Better Pruning Criteria"

Reducing language model (LM) size is a critical issue when applying a LM to realistic applications which have memory constraints. In this paper, three measures are studied for the purpose of LM pruning. They are probability, rank, and entropy. We evaluated the performance of the three pruning criteria in a real application of Chinese text input in terms of character error rate (CER). We first present an empirical comparison, showing that rank performs the best in most cases. We also show that the high-performance of rank lies in its strong correlation with error rate. ...

• ### Báo cáo khoa học: "Criteria for Measuring Term Recognition"

This paper qualifies what a true termrecognition systems would have to recognize. The exact bracketing of the maximal termform is then proposed as an achieveable goal upon which current system performance should be measured. How recall and precision metrics are best adapted for measuring term recognition is suggested. derlying premises should be made clear. Firstly, the automatic system is designed to recognize segments of text that, conventionally, have been manually identified by a terminologist, indexer, lexicographer or other trained individual.

• ### Lọc Kalman - lý thuyết và thực hành bằng cách sử dụng MATLAB (P5)

Linear estimators for discrete and continuous systems were derived in Chapter 4. The combination of functional linearity, quadratic performance criteria, and Gaussian statistics is essential to this development. The resulting optimal estimators are simple in form and powerful in effect. Many dynamic systems and sensors are not absolutely linear, but they are not far from it. Following the considerable success enjoyed by linear estimation methods on linear problems, extensions of these methods were applied to such nonlinear problems....

• ### Part 2: Civil engineering — Section 2.6 Inland waters, coastal and maritime engineering

This Section of Part 2 of BS 6100 has been prepared under the direction of the Basic Data and Performance Criteria for Civil Engineering and Building Structures Standards Policy Committee. A general introduction to and explanation of this glossary is given in Part 0 of BS 6100, which itemizes the Parts, Sections and Subsections into which this glossary is divided and provides a general alphabetical index of all the terms in the Sections and Subsections already published.

• ### Optimal Control with Engineering Applications With 12 Figures Hans P. Geering

Tham khảo sách 'optimal control with engineering applications with 12 figures hans p. geering', kỹ thuật - công nghệ, điện - điện tử phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

• ### MATERIALS SELECTION DESKBOOK

The chemical process industries (CPI), petroleum and allied industries apply physical as well as chemical methods to the conversion of raw feedstock materials into salable products. Because of the diversity of products, process conditions and requirements, equipment design is often unique, or case specific. The prime requirement of any piece of equipment is that it performs the function for which it was designed under the intended process operating conditions, and do so in a continuous and reliable manner.

• ### Introduction to Manufacturing Processes

This revision aims to address changes that have taken effect since the publication of the second edition. The most significant change has been in the attitude of industry to concurrent engineering. In 1987, mostly lip service was paid to it; today, it has become general practice in most competitive corporations. In the second edition , the author discussed this as the manufacturing system. In the third edition it becomes the focal point.

• ### Part 6: Concrete and plaster — Section 6.5 Formwork

This Section of Part 6 of BS 6100 has been prepared under the direction of the Basic Data and Performance Criteria for Civil Engineering and Building Structures Standards Committee. This Section supersedes BS 4340 “Glossary of formwork terms”, which is therefore withdrawn. A general introduction to and explanation of this glossary is given in Part 0 of BS 6100 which itemizes the Parts, Sections and Subsections into which this glossary is divided and provides a general alphabetical index of all the terms in the Sections and Subsections already published....

• ### Evapotranspiration Covers for Landfills and Waste Sites

The book describes the design, construction, and maintenance of innovative ET covers for landfills and waste. The author discusses why several vegetative covers have failed and provides simple, inexpensive solutions. He examines the design and construction of ET covers and other methods, highlighting their differences and successful alternative construction methods. The text contains the first proposed performance measurements for conventional and innovative landfill covers based on the data collected at more than fifty-five sites.

• ### Frontiers in Advanced Control Systems

The current control problems present natural trend of increasing its complexity due to performance criteria that is becoming more sophisticated. The necessity of practicers and engineers in dealing with complex dynamic systems has motivated the design of controllers, whose structures are based on multiobjective constraints, knowledge from expert, uncertainties, nonlinearities, parameters that vary with time, time delay conditions, multivariable systems, and others.

• ### Seismic Design of Steel Bridges

Seismic Design of Steel Bridges 39.1 Introduction Seismic Performance Criteria • The R Factor Design Procedure • Need for Ductility • Structural Steel Materials • Capacity Design and Expected Yield Strength • Member Cyclic Response 39 39.2 Ductile Moment-Resisting Frame (MRF) Design • Introduction • Design Strengths • Member Stability Considerations • Column-to-Beam Connections 39.3 Chia-Ming Uang University of California, San Diego Ductile Braced Frame Design Concentrically Braced Frames • Eccentrically Braced Frames Keh-Chyuan Tsai National Taiwan University 39.

• ### FRONTIER IN ADVANCED CONTROL SYSTEMS

The current control problems present natural trend of increasing its complexity due to performance criteria that is becoming more sophisticated. The necessity of practicers and engineers in dealing with complex dynamic systems has motivated the design of controllers, whose structures are based on multiobjective constraints, knowledge from expert, uncertainties, nonlinearities, parameters that vary with time, time delay conditions, multivariable systems, and others.

• ### Appendix A: ISA Server Caching Criteria

HTTP Caching ISA Server uses the following criteria when caching HTTP objects:  HTTP Methods. The Request Method must be an HTTP GET. Otherwise, ISA Server bypasses the cache mechanism. An exception is the case of negative caching. If the request is an HTTP PUT or an HTTP DELETE, ISA Server purges obsolete data from the cache.  Dynamic Content. By default, ISA Server does not cache dynamic content, which is defined as URLs that contain a “?.” If you enable caching of dynamic content, ISA Server caches the object only if the response header contains an Always Cache meta-tag.