Solid surfaces

Xem 1-20 trên 76 kết quả Solid surfaces
  • Import 2D outline drawing into Catia Build 3D curves based on the imported drawing Build the upper surfaces of the mouse (by Generative Shape Design) Do the draft analysis to search any undercut portion on the upper surfaces Adjust the curvature of the problem surface manually Build the lower surfaces of the mouse Convert the surfaces into a solid Build the parting surfaces based on the imported drawing Create components from the finished model Re-assemble the components into a product Modify the outlook of the master model and then get all components updated automatically...

    pdf99p nguyen8 02-12-2009 334 200   Download

  • Surface contamination: – The obvious contamination/alteration of surfaces that can be the result of less-than careful sample preparation – Solid surfaces can adsorb gases: At 10-6 torr, a complete monolayer of a gas (e.g. CO) takes just 3 seconds to form. At 10-8 torr, monolayer formation takes 1 hour. – Most studies are conducted under vaccuum – although there are newer methods that don’t require this.

    pdf23p qdung92ct 03-07-2012 36 8   Download

  • Tham khảo sách 'the finite element method fifth edition volume 2: solid mechanics.professor o.c. zienkiewicz', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf476p khangoc2392 12-08-2012 24 6   Download

  • The new millennium has seen the birth of a new perspective that conflates research in solid-state physics, biological science as well as materials engineering. The perspective is one that recognizes that future new advances in all these areas will be based on a fundamental understanding of the atomic and molecular infrastructure of materials that has resulted from two centuries of chemistry. Major advances will be achieved when the novel behavior, in particular the quantum mechanical behavior, that nanoscale structures possess, can be controlled and harnessed....

    pdf0p waduroi 03-11-2012 33 5   Download

  • The solid gas interface general considerations, adsorption of gases and vapors on solids, chemisorption and catalysis is the main content of the book "Physical Chemistry of Surfaces". Invite you to consult the text book for more documents serving the academic needs and research.

    pdf190p nguyenphong201 12-12-2015 16 4   Download

  • Fractures are ubiquitous in the brittle lithosphere in the upper part of earth’s crust. They play a critical role in the transport of fluids. Moreover, all major discovered geothermal reservoirs and a considerable number of petroleum reservoirs are in fractured rocks. This restates the importance of studying multiphase flow behavior inside the opened fracture space. From the engineering point of view, a rock fracture as defined here is simply a complex-shaped cavity filled with fluids or solid minerals. Therefore it is understood to include cracks, joints, and faults.

    pdf0p aries23 29-09-2012 48 21   Download

  • Surface effects in film coating Michael E.Aulton SUMMARY This chapter will explain the significance of the stages of impingement, wetting, spreading and penetration of atomized droplets at the surface of tablet or multiparticulate cores. It will explain some of the fundamental aspects of solid-liquid interfaces which are important to the process of film coating. This chapter will emphasize the importance of controlling the ‘wetting power’ of the spray and the ‘wettability’ of the substrate, and will explain how this can be achieved by changes in formulation and process parameters.

    pdf33p bigbaby87 01-09-2010 59 14   Download

  • In the last decade, we have witnessed a rapid growth in research and development of nanotechnology, especially nanostructured materials. Nanoporous materials as an important class of nanostructured materials possess high specific surface area, large pore volume, uniform pore size, and rich surface chemistry. These materials present great promises and opportunities for a new generation of functional materials with improved and tailorable properties for applications in adsorption, membranes, sensors, energy storage, catalysis and photocatalysis, and biotechnology, etc.

    pdf917p thix1minh 16-10-2012 58 14   Download

  • Adsorption occurs whenever a solid surface is exposed to a gas or liquid: it is defined as the enrichment of material or increase in the density of the fluid in the vicinity of an interface. Under certain conditions, there is an appreciable enhancement in the concentration of a particular component and the overall effect is then dependent on the extent of the interfacial area. For this reason, all industrial adsorbents have large specific surface areas (generally well in excess of 100mZg-I) and are therefore highly porous or composed of very fine particles...

    pdf465p tuyetmuadong2013 06-04-2013 24 10   Download

  • Bhushan, B. “Nanomechanical Properties of Solid Surfaces and Thin Films” Handbook of Micro/Nanotribology. Ed. Bharat Bhushan Boca Raton: CRC Press LLC, 1999 © 1999 by CRC Press LLC Nanomechanical Properties of Solid Surfaces and Thin Films Bharat Bhushan 10.1 10.2 Introduction Nanoindentation Hardness Measurement Apparatuses Commercial Nanoindentation Hardness Apparatuses with Imaging of Indents after Unloading • Prototype DepthSensing Nanoindentation Hardness Apparatuses • Commercial Depth-Sensing Nanoindentation Hardness Apparatus and Its Modifications 10 10.

    pdf93p medinova 26-10-2010 33 7   Download

  • .MOSFET MODELING FOR VLSI SIMULATION Theory and Practice .International Series on Advances in Solid State Electronics and Technology (ASSET) Founding Editor: Chih-Tang Sah Published: Modern Semiconductor Quantum Physics by Li Ming-Fu Topics in Growth and Device Processing of III-V Semiconductors by Stephen John Pearton, Cammy R. Abernathy & Fan Ren Ionizing Radiation Effects in MOS Oxides by Timothy R. Oldham Forthcoming.

    pdf633p louisxlll6 28-12-2012 45 7   Download

  • Mesh Surface View a topic Ruled surface Section Surface Through Curves N-Sided Surface overview Through Curve Mesh 1. Ruled surface Use the Ruled command to create a body between two sections, where the ruled shape is a linear transition between the sections. A section can consist of single or multiple objects, and each object can be a curve, a solid edge, or a solid face.

    pdf71p allspackht 13-06-2013 27 7   Download

  • Greenhouse gases, such as carbon dioxide, nitrous oxide, methane, and ozone, play an important role in balancing the temperature of the Earth’s surface by absorbing and emitting radiation within the thermal infrared range from the source. However, with the enormous burning of fossil fuels from the industrial revolution, the concentration of greenhouse gases in the atmosphere has greatly increased.

    pdf348p qsczaxewd 25-09-2012 24 6   Download

  • (NB)Bài giảng Autocad 3D được biên soạn với các nội dung: Giới thiệu về các mô hình 3D, hệ trục tọa độ, mô hình Surface - mô hình Mesh, xây dựng mô hình Solid, hiệu chỉnh khối Solid, tạo bản sẽ 2D từ mô hình Solid, trình diễn mô hình. Mời các bạn cùng tham khảo tài liệu.

    pdf68p thinhdat323 18-09-2016 13 6   Download

  • Catalysis and Electrocatalysis at Nanoparticle Surfaces reflects many of the new developments of catalysis, surface science, and electrochemistry. The first three chapters indicate the sophistication of the theory in simulating catalytic processes that occur at the solid–liquid and solid–gas interface in the presence of external potential. The first chapter, by Koper and colleagues, discusses the theory of modeling of catalytic and electrocatalytic reactions.

    pdf970p echbuon 02-11-2012 31 5   Download

  • The Environment Agency plays a central role in managing flood risk from rivers and the sea. We have the strategic overview role for flood risk management from all causes of flooding, including rivers, the sea, groundwater, reservoirs and surface water. This report explains how we tackle the risk of flooding in England, looking mainly at flooding from rivers and the sea. Flooding is a part of nature. It is neither technically feasible nor economically affordable to prevent all properties from flooding.

    pdf73p yeutinh98 26-09-2012 23 4   Download

  • The simplest drilling fluid is a dirty mixture of water and clay, often referred to as mud. The drilling fluid in the drilling process can be seen as the equivalent to the blood in the human body, the mud pump is the heart, and the drilled out shale (cuttings) represent the slag products. At the surface, we find the mud cleaning system which corresponds to the kidney and the lungs. In the mud cleaning system the cuttings are removed by means of a sieve, the shale shaker.

    pdf132p sn_buon 29-11-2012 35 4   Download

  • Chiavazzo and Asinari Nanoscale Research Letters 2011, 6:249 http://www.nanoscalereslett.com/content/6/1/249 NANO EXPRESS Open Access Enhancing surface heat transfer by carbon nanofins: towards an alternative to nanofluids? Eliodoro Chiavazzo and Pietro Asinari* Abstract Background: Nanofluids are suspensions of nanoparticles and fibers which have recently attracted much attention because of their superior thermal properties. Nevertheless, it was proven that, due to modest dispersion of nanoparticles, such high expectations often remain unmet.

    pdf13p dauphong13 09-02-2012 21 3   Download

  • Three-dimensional (3D) laser micro-fabrication has become a fast growing field of science and technology. The very first investigations of the laser modifications and structuring of materials immediately followed the invention of the laser in 1960. Starting from the observed photomodifications of laser rod materials and ripple formation on the irradiated surfaces as unwanted consequences of a high laser fluence, the potential of material structuring was tapped.

    pdf369p echbuon 02-11-2012 16 3   Download

  • The invention of scanning tunneling microscope (STM) by Binnig and his colleagues in 1982 opened up the possibility of imaging material surfaces with spatial resolution much superior to the conventional microscopy techniques. The STM is the first instrument capable of directly obtaining three-dimensional images of solid surfaces with atomic resolution. Even though STM is capable of achieving atomic resolution, it can only be used on electrical conductors. This limitation has led to the invention of atomic force microscope (AFM) by Binnig and his co-workers in 1986.

    pdf253p thienbinh1311 13-12-2012 25 3   Download

CHỦ ĐỀ BẠN MUỐN TÌM

Đồng bộ tài khoản