Dynamic modeling using unisim design: Unit 3 - Transitioning from steady state to dynamics
48
lượt xem 3
download
lượt xem 3
download
Download
Vui lòng tải xuống để xem tài liệu đầy đủ
Equipment sizing, define pressure flow specification, add strip chart and controllers, run a simple dynamicsimulation and observe the role of various controllers,... As the main contents of the lectures unit 3 "Transitioning from steady state to dynamics" Dynamic modeling using unisim design. Invite you to consult for additional learning materials and research.
Chủ đề:
Bình luận(0) Đăng nhập để gửi bình luận!
CÓ THỂ BẠN MUỐN DOWNLOAD