Lecture Well Drilling Engineering: Rolling Cutter Bits - Dr. Do Quang Khanh
12
lượt xem 1
download
lượt xem 1
download
Download
Vui lòng tải xuống để xem tài liệu đầy đủ
Lecture Well Drilling Engineering: Rolling Cutter Bits - Dr. Do Quang Khanh. After completing this section, you will understand knowledge about: rolling cutter bits, steel tooth (milled tooth), carbide tooth (tungsten carbide insert - TCI); grading of worn bits; bit performance; buoyancy; sealed bearing lubrication system;...
Chủ đề:
Bình luận(0) Đăng nhập để gửi bình luận!
CÓ THỂ BẠN MUỐN DOWNLOAD