MicroSim PSpice A/D (P2)

Chia sẻ: Tuyen Thon | Ngày: | Loại File: PDF | Số trang:20

lượt xem

MicroSim PSpice A/D (P2)

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

The end frequency value must not be less than the start frequency value, and both must be greater than zero. The whole sweep must include at least one point. If a group delay (G suffix) is specified as an output, the frequency steps must be close enough together that the phase of that output changes smoothly from one frequency to the next. Calculate group delay by subtracting the phases of successive outputs and dividing by the frequency increment.

Chủ đề:

Nội dung Text: MicroSim PSpice A/D (P2)

Đồng bộ tài khoản