intTypePromotion=1

NETSIM FOR CCNA LAB MANUAL

Chia sẻ: Nguyen Nhi | Ngày: | Loại File: PDF | Số trang:231

0
89
lượt xem
26
download

NETSIM FOR CCNA LAB MANUAL

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

Objective: Become familiar with the Cisco Router. Lab Equipment: Router 1 from the eRouters menu Background Reading: Lab Primer Lesson 1: Introduction to the Cisco Router Command-Line Interface 1. When the lab has fi nished loading, the Router 1 window will open, and the text “Press Enter to Start” will appear. 2. Click inside the Router 1 window, and press the ENTER key to get started. You are now connected to Router 1 and are at the user mode prompt. The prompt is broken into two parts: the host name and the mode. Router is Router 1’s host name, and the prompt indicates user mode....

Chủ đề:
Lưu

Nội dung Text: NETSIM FOR CCNA LAB MANUAL

ADSENSE
ADSENSE

CÓ THỂ BẠN MUỐN DOWNLOAD

 

Đồng bộ tài khoản
2=>2