Networking: A Beginner’s Guide Fifth Edition- P70

Chia sẻ: Cong Thanh | Ngày: | Loại File: PDF | Số trang:5

Thêm vào BST

Báo xấu

54
lượt xem 4
download

Download Vui lòng tải xuống để xem tài liệu đầy đủ

Networking: A Beginner’s Guide Fifth Edition- P70:I have run into many people over the years who have gained good even impressive working knowledge of PCs, operating systems, applications, and common problems and solutions. Many of these people are wizards with desktop computers.

Chủ đề:

Bình luận(0) Đăng nhập để gửi bình luận!

Lưu

Nội dung Text: Networking: A Beginner’s Guide Fifth Edition- P70

Chapter 21: Introduction to Linux Systems Administration 327 Figure 21-3. Setting user properties The Password Info tab lets you set password expiration settings for the selected user account. The Groups tab lets you assign security group membership to the selected user account. To remove a user, from the main User Manager window, select the user account to be deleted, and then click the Delete button in the toolbar. Changing Root’s Password As mentioned in the previous chapters, the root user is a special user who has a lot of power on the system. Obviously, an account with this much power needs to be protected with a good password. If you think that someone might have gotten the root password, or that someone who had the root password should no longer have it (for example, a former employee), you should immediately change it. To change the root password on a system, from the System menu, choose Administration, then Root Password. After being prompted for the current root password, you see the dialog box shown in Figure 21-4. Enter the new password to use for the root account in the two fields provided. The program will not let you change the root password if both entries do not match exactly. (Remember that Fedora Linux, like all UNIX operating systems, uses case-sensitive passwords.) Click OK to complete the change.
328 Networking: A Beginner’s Guide Figure 21-4. Changing the root password Configuring Common Network Settings Linux is very much at home in a networked environment. In fact, its design from the onset supports its use on a network. Networks are dynamic, and Linux makes it easy to change the network configuration to accommodate the changes in the network. You manage network settings through the Network Configuration window, as shown in Figure 21-5. To access this window, open the System menu, choose Administration, and then choose Network. Figure 21-5. Use the Network Configuration window to change the network configuration.
Chapter 21: Introduction to Linux Systems Administration 329 Figure 21-6. Changing Ethernet device settings Changing Your IP Address In most cases, if a system is configured to use DHCP to acquire its IP address, you should not change the IP address setting. However, at times you will need to set a static IP address on a system. To change the IP address of your system, click the Edit button in the toolbar at the top of the Network Configuration window. This brings up the Ethernet Device dialog box, as shown in Figure 21-6. Click the Statically Set IP Addresses option button. Then enter the appropriate IP address information in the Manual IP Address Settings fields. Once you have made all of your selections, click OK to accept the changes. Adding Entries to the /etc/hosts File The /etc/hosts file contains a list of hostname-to-IP mappings. Most systems use this list so that they can find other machines on the network if DNS ever becomes inaccessible. Typical entries include the host itself, servers for common services (such as the DNS server), and gateway entries.
330 Networking: A Beginner’s Guide Figure 21-7. Modifying host entries To add entries to the /etc/hosts file, click the Hosts tab in the Network Configuration window, as shown in Figure 21-7. Then click the New button to open the Add/Edit Hosts Entry dialog box, as shown in Figure 21-8. Enter the appropriate information into the Address and Hostname fields, and if desired, the Aliases field. Then click OK to save your changes. Changing the DNS Client Configuration If your system needs to work with a larger network (such as the Internet), it is a good idea to configure your system to point to a DNS server so that it can resolve host names Figure 21-8. Adding a new host to the hosts file
Chapter 21: Introduction to Linux Systems Administration 331 Figure 21-9. Configuring a system’s DNS settings to IP addresses, and vice versa. Many times, the appropriate DNS servers to use are automatically assigned through the DHCP process, but if necessary, you can control these settings using the Network Configuration window. Click the DNS tab in the Network Configuration window to see the DNS configuration of the computer, as shown in Figure 21-9. Enter the IP addresses for the DNS servers you want to use in the Primary DNS, Secondary DNS, and Tertiary DNS fields. Close the Network Configuration dialog box to commit these changes. Mastering Linux Command-Line Basics Historically, the aspect of UNIX that makes it so powerful and flexible has been the options available through the command line. Casual observers of UNIX gurus are often astounded at how a few carefully entered commands can result in powerful actions. Unfortunately, this power comes at the expense of ease of use. For this reason, GUIs have proliferated and have become the de facto standard for so many tools. As you become more experienced, however, you will find that it is difficult for GUIs to present all of the available options to a user, because doing so would make the interface just as complicated as the command-line equivalent. Thus, the GUIs have remained overly simplified, and experienced users have needed to resort to the command line.