Soneplex® Loopback

Chia sẻ: Thuy Van | Ngày: | Loại File: PDF | Số trang:2

lượt xem

Soneplex® Loopback

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

There are several ways which loopbacks can be placed in and on Soneplex units for extended testing of circuits. Listed are several ways of providing these loopbacks: 1. At the HLXR location, provide a physical cord loop from the Network “IN” to the “OUT” jacks on the face of the unit. This provides a hard loop to run any stress test the customer requires. Once testing is completed, this cord loop will have to be removed. 2. If a repair person is at the customer location, they can access the HLXR unit and from the Main Menu, go to the HLX Configuration screen and change the Loopback...

Chủ đề:

Nội dung Text: Soneplex® Loopback

Đồng bộ tài khoản