Characteristics of EDM

Xem 1-7 trên 7 kết quả Characteristics of EDM
  • (BQ) A systematical and comprehensive investigation of the material removal characteristics of the electrical discharge machining (EDM) process using various dielectrics as the working fluids was conducted in this work. Five dielectrics, including gaseous dielectrics, air and oxygen, and liquid dielectrics, de-ionized water, kerosene and water-in-oil (W/O) emulsion were used as the working fluids.

    pdf10p xuanphuongdhts 27-03-2017 26 1   Download

  • (BQ) From the experimental results, it has been found that the electrical conductivity of the tool electrode has the most influencing nature on the machining characteristics in EDM process. The optimal combination of the input process parameters has been obtained using Taguchi-grey relational analysis.

    pdf8p xuanphuongdhts 27-03-2017 45 2   Download

  • (BQ) The adequate selection of manufacturing conditions is one of the most important aspects to take into consideration in the die-sinking electrical discharge machining (EDM) of conductive ceramics, as these conditions are the ones that are to determine such important characteristics as: surface roughness, electrode wear (EW) and material removal rate, among others. In this work, a study was carried out on the influence of the factors of intensity (I), pulse time (ti) and duty cycle (η) over the listed technological characteristics.

    pdf7p xuanphuongdhts 27-03-2017 17 1   Download

  • (BQ)In this paper a new contribution to the simulation and modelling of the EDM process is presented. Temperature fields within the workpiece generated by the superposition of multiple discharges, as it happens during an actual EDM operation, are numerically calculated using a finite difference schema. The characteristics of the discharge for a given operation, namely energy transferred onto the workpiece, diameter of the discharge channel and material removal efficiency can be estimated using inverse identification from the results of the numerical model.

    pdf10p xuanphuongdhts 27-03-2017 22 1   Download

  • (BQ) The study used Taguchi dynamic approach coupled with a proposed ideal function model to optimize a high-speed EDM process for high geometrical machining precision and accuracy. The designed tool electrode including two basic geometries of square and circle as the distinct characteristics of workpiece is employed to help develop a versatile process for wider industrial applications. To enhance the speed and stability of EDM process, large discharge current is applied and aluminum (Al) powder added into the working fluid throughout the experiments.

    pdf10p xuanphuongdhts 27-03-2017 14 1   Download

  • (BQ) Machining speed and surface integrity continue to be issues of focus in current wire EDM research. In this light, the proof-of-concept of a hybrid wire EDM process that utilizes a wire embedded with electrically non-conducting abrasives is presented. Material removal in this novel process is realized through electrical erosion that is augmented by two-body abrasion. This is shown to bring about a significant improvement in the removal rate and generate surfaces with minimal recast material, in comparison to an equivalent wire EDM process.

    pdf4p xuanphuongdhts 27-03-2017 25 1   Download

  • (BQ) In this research, an iso duration current pulse generator has been proposed to achieve good surface finish. An experimental performance evaluation has been conducted with conventional transistor pulse train generator and modified iso current pulse generator by Taguchi L27 orthogonal array design. The machining characteristics have been evaluated for both the pulse generators. It is found the that modified iso duration current pulse generator has produced better surface quality with higher material removal rate than the conventional transistor pulse train generator.

    pdf8p xuanphuongdhts 27-03-2017 19 1   Download


p_strKeyword=Characteristics of EDM

nocache searchPhinxDoc


Đồng bộ tài khoản