intTypePromotion=1
ADSENSE

Configuring NAT

Xem 1-20 trên 27 kết quả Configuring NAT
  • Tham khảo tài liệu 'configure nat', tài liệu phổ thông phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf14p maiphuong 11-08-2009 56 9   Download

  • Tham khảo tài liệu 'configuring nat', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf7p laquang 03-09-2009 71 7   Download

  • The following will be discussed in this chapter: Configure DHCP in an enterprise branch network, Configure NAT on a Cisco router, Configure new generation RIP (RIPng) to use IPv6. Every device that connects to a network needs an IP address. Network administrators assign static IP addresses to routers, servers, and other network devices whose locations (physical and logical) are not likely to change.

    pdf107p youcanletgo_01 04-01-2016 39 2   Download

  • After studying this chapter you will be able to: Configure DHCP in an enterprise branch network, configure NAT on a Cisco router, configure new generation RIP (RIPng) to use IPv6. Inviting you to refer.

    ppt34p youcanletgo_01 30-12-2015 26 1   Download

  • This chapter describes how to log into the CSS and configure an IP address, subnet mask, and default route. Included in this chapter is a description of the system software. It also contains information on using the Offline Diagnostic Monitor (Offline DM) menu. Information in this chapter applies to all CSS models except where noted. CSS software is available in a Standard or Enhanced feature set.

    pdf324p phongthinh 07-08-2009 165 26   Download

  • An ISP has allocated a company the public classless interdomain routing (CIDR) IP address 199.99.9.32/27. This is equivalent to 30 public IP addresses. Since the company has an internal requirement for more than 30 addresses, the IT manager has decided to implement NAT. The addresses 199.99.9.33 – 199.99.9.39 for static allocation and 199.99.9.40 – 199.99.9.62 for dynamic allocation. Routing will be done between the ISP and the gateway router used by the company.

    pdf7p thanhha 27-08-2009 90 24   Download

  • Tham khảo sách 'nortel vpn router configuration — firewalls, filters, nat, and qos', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf154p hoangtumayman 14-05-2010 88 12   Download

  • Upon completing this lesson, you will be able to: Describe the features and operation of NAT on Cisco routers Use Cisco IOS commands to configure NAT, given a functioning router Use show commands to identify anomalies in the NAT configuration, given an operational router Use debug commands to identify events and anomalies in the NAT configuration, given an operational router

    ppt21p trinhvang 25-01-2013 43 6   Download

  • This chapter has outlined: How NAT is used to help alleviate the depletion of the IPv4 address space; NAT conserves public address space and saves considerable administrative overhead in managing adds, moves, and changes; NAT for IPv4; The configuration, verification, and analysis of static NAT, dynamic NAT, and NAT with overloading;... Inviting you to refer lecture for more information.

    pdf48p kiepnaybinhyen_02 29-12-2015 38 3   Download

  • The following tasks must be achieved: 1. Configure the DLSwitch as the VTP servers, VTP domain vnpro, and all other switches as VTP clients. 2. Spanning­Tree must be configured to designate the Distribution layer switch as the primary root bridge  for all configured VLANs. 

    doc16p 090502besty 30-11-2009 226 107   Download

  • Remember that loopback interfaces will show up as /32 routes in OSPF and EIGRP. Configure a summary address or range in order to reflect the proper subnet carried by the loopback interface. This is most important in LAT translation and NAT when a NAT address or LAT translation address calls for an address within the loopback's subnet. The remote router won't know about that address since only the /32 address of the loopback interface itself will be advertised. Same for PPP dialup routes apparently....

    pdf1p xuankhuong 03-09-2009 135 28   Download

  • The ISP has allocated a company the public classless interdomain routing (CIDR) IP address 199.99.9.32/27. This is equivalent to 30 public IP addresses. Since the company has an internal requirement for more than 30 addresses, the IT manager has decided to use NAT. Addresses 199.99.9.33 – 199.99.9.39 will be reserved for static allocation and 199.99.9.40 – 199.99.9.62 for dynamic allocation. Routing between the ISP and the gateway router will be done using a static route between the ISP and the gateway, and a default route between the gateway and the ISP.

    pdf7p thanhha 27-08-2009 146 26   Download

  • Tham khảo tài liệu 'configuring static nat addresses', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf7p laquang 03-09-2009 141 25   Download

  • The ISP has allocated a company the public CIDR IP address 199.99.9.32/30. This is equivalent to 4 public IP addresses. Since the company has an internal requirement for more than 30 addresses, the IT manager has decided to use NAT with PAT. Routing between the ISP and the gateway router is done using a static route between the ISP and the gateway, and a default route between the gateway and the ISP. The ISP connection to the Internet will be represented by a loopback address on the ISP router.

    pdf7p thanhha 27-08-2009 123 23   Download

  • Implementing IP Addressing Services. Objectives: Configure DHCP in an enterprise branch network, Configure NAT on a Cisco router, Configure new generation RIP (RIPng) to use IPv6. Every device that connects to a network needs an IP address. Network administrators assign static IP addresses to routers, servers, and other network devices whose locations (physical and logical) are not likely to change. Administrators enter static IP addresses manually when they configure devices to join the network. Static addresses also enable administrators to manage those devices remotely....

    pdf55p thanhtung_hk 05-11-2010 99 19   Download

  • Aidan McDonald has just received a DSL line Internet connection to a local ISP in his home. The ISP has allocated only one IP address to be used on the serial port of his remote access device. Routing between the ISP and the home router is done using a static route between the ISP and the gateway routers, and a default route between the gateway and the ISP routers. The ISP connection to the Internet will be represented by a loopback address on the ISP router.

    pdf6p thanhha 27-08-2009 78 12   Download

  • This book is meant to be a resource for anyone involved in the design, production, overseeing, or troubleshooting of a site that employs server load balancing (SLB). Managers and other high-level people can use this book to improve their understanding of the overall technology. Engineers and site architects can use this book to give insight into their designs and implementations of SLB. Technicians can use this book to help configure and troubleshoot SLB implementations, as well as other in-the-trenches work....

    pdf182p tailieuvip13 19-07-2012 61 10   Download

  • The objectives of this chapter: Identify private IP addresses as described in RFC 1918; discuss characteristics of NAT and PAT; explain the benefits of NAT; explain how to configure NAT and PAT, including static translation, dynamic translation, and overloading.

    ppt19p xaydungk23 19-04-2016 40 3   Download

  • Students will be able to: Describe IPv6, describe the basics of IPv6 addressing, describe and configure IPv6 addresses, describe and configure IPv6 routing, describe and configure IPv6 tunneling, describe and configure static and dynamic NAT -PT.

    pdf312p youcanletgo_01 29-12-2015 22 1   Download

  • OpenVPN is an open source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It uses a custom security protocol[2] that utilizes SSL/TLS for key exchange. It is capable of traversing network address translators (NATs) and firewalls. It was written by James Yonan and is published under the GNU General Public License (GPL)

    pdf36p good_life 17-11-2009 238 105   Download

CHỦ ĐỀ BẠN MUỐN TÌM

ADSENSE

p_strKeyword=Configuring NAT
p_strCode=configuringnat

nocache searchPhinxDoc

 

Đồng bộ tài khoản
2=>2