Fine aggregate

This research investigates the properties of concrete utilizing coal mine waste rock (CMWR) as a substitute for river sand. The workability of fresh concrete is assessed through slump tests, revealing a decrease in a slump as the percentage of CMWR replacement increases.

13p vibecca 01-10-2024 0 0   Download

In this study, raw rice husk and bottom ash are used as fine aggregates, while fly ash is used as a binder material in the production of environmentally friendly unfired building bricks. The effect of raw rice husk content on the properties of green building bricks is investigated.

11p vifilm 24-09-2024 7 1   Download

This study presents an experimental investigation on the recycling of waste incineration bottom ash (IBA) as a fine aggregate in the production of interlocking concrete bricks (ICB). Before being used, the concentration of heavy metal in IBA was determined to confirm it is a non-toxic material.

12p vifilm 24-09-2024 3 1   Download

This study also provides an environmentally friendly solution for recycling waste medical glass in construction materials. By the way, both the environmental pollution and the depletion of natural resources (natural aggregates) were limited effectively for the goal of sustainable development.

16p vifilm 24-09-2024 1 1   Download

The ultimate aim of this study is to use experimental work for evaluating the modulus of elasticity (MOE) of Geopolymer concrete (GPC) using marine sand as fine aggregate and seawater for the mix. Four different groups of concrete mixtures, namely CP1a, CP1b, CP2a, CP2b were identified.

9p vifilm 24-09-2024 2 1   Download

This study, therefore, aimed to manufacture new SA for concrete using WCP mixed with cement as a binder and to evaluate the mechanical properties of SA compared to the specified technical requirements of RCA for concrete in TCVN 11969 in Vietnam.

8p vifaye 20-09-2024 1 1   Download

This study proposes applying cold-bonded low calcium Class F fly ash (FFA) based artificial lightweight aggregate (ALWA) to partially replace natural fine aggregate in an ecological unfired brick with a low energy super-sulfated cement (SSC).

12p viyoko 20-09-2024 3 2   Download

This paper, therefore, set out to find the influence of the microfines on the performance of concrete by determining its effect on the slump, the water demand, and compressive strength of concrete with microfines from 1 to 6% at 1% increment of the weight of fine aggregates.

10p vifaye 20-09-2024 2 1   Download

Wastes generated from healthcare practices are a serious problem for humans as well as for the environment. In this study, an attempt was made to use mixed solid medical waste (WPN) which consisted of shredded waste plastic and chopped waste needles for partial replacement of natural fine aggregate (sand) in concrete mixes at 0%, 2%, 4%, 6%, 8% and 10% by weight.

13p vifaye 20-09-2024 2 1   Download

This paper deals with using stainless steel reducing slag (SSRS), a byproduct generated from stainless steel making process, as a cement substitute in production of soil-based controlled low-strength material (CLSM). In the CLSM mixture, surplus soil and river sand were blended well together with a sand-soil proportion of 6:4 by volume in order to produce fine aggregate. Totally, twelve mixtures were prepared for experiment when we changed in turn percentages of Portland cement replacement with SSRS of 0%, 10%, 20%, and 30% by weight and the water-to-binder ratio of 3.4, 3.6, and 3.8.

5p cathydoll5 26-02-2019 21 0   Download

Stages of neutrophil development shown schematically. G-CSF (granulocyte colony-stimulating factor) and GM-CSF (granulocytemacrophage colony-stimulating factor) are critical to this process. Identifying cellular characteristics and specific cell-surface markers are listed for each maturational stage. Figure 61-3 Neutrophil band with Döhle body. The neutrophil with a sausage-shaped nucleus in the center of the field is a band form.

4p konheokonmummim 03-12-2010 77 6   Download