Machining characteristics

Xem 1-20 trên 52 kết quả Machining characteristics
• Notes for an Introductory Course On Electrical Machines and Drives E.G.Strangas MSU Electrical

In this chapter you will learn the following: ² The concepts of power, (real reactive and apparent) and power factor ² The operation of threephase systems and the characteristics of balanced loads in Y and in ¢ ² How to solve problems for threephase systems

• TUNGSTEN CARBIDE – PROCESSING AND APPLICATIONS

Tungsten Carbide - Processing and Applications, provides fundamental and practical information of tungsten carbide from powder processing to machining technologies for industry to explore more potential applications. Tungsten carbide has attracted great interest to both engineers and academics for the sake of its excellent properties such as hard and wear-resistance, high melting point and chemically inert. It has been applied in numerous important industries including aerospace, oil and gas, automotive, semiconductor and marine as mining and cutting tools, mould and die, wear parts, etc.

• Notes For An Introductory Course On Electrical Machines And Drives

Flux and Voltage Induction Machines 6.1 Description 6.2 Concept of Operation 6.3 Torque Development 6.4 Operation of the Induction Machine near Synchronous Speed 6.5 Leakage Inductances and their Effects 6.6 Operating characteristics 6.7 Starting of Induction Motors 6.8 Multiple pole pairs Synchronous Machines and Drives 7.1 Design and Principle of Operation 7.1.1 Wound Rotor Carrying DC 7.1.2 Permanent Magnet Rotor 7.2 Equivalent Circuit 7.3 Operation of the Machine Connected to a Bus of Constant Voltage and Frequency 7.4 Operation from a Source of Variable Frequency and Voltage...

• Báo cáo khoa học: "Machine Translation with a Stochastic Grammatical Channel"

We introduce a stochastic grammatical channel model for machine translation, that synthesizes several desirable characteristics of both statistical and grammatical machine translation. As with the pure statistical translation model described by Wu (1996) (in which a bracketing transduction grammar models the channel), alternative hypotheses compete probabilistically, exhaustive search of the translation hypothesis space can be performed in polynomial time, and robustness heuristics arise naturally from a language-independent inversiontransduction model. ...

• Báo cáo khoa học: "A Case Analysis Method Cooperating with ATNG and Its Application to Machine Translation"

This paper present a n e w method for parsing English sentences. The parser called L U T E - E J parser is combined with case analysis and A T N G - b a s e d analysis. L U T E - E J parser has two interesting mechanical characteristics. O n e is providing a structured buffer, Structured Constituent Buffer, so as to hold previous fillersfor a case structure, instead of case registers before a verb appears in a sentence. The other is extended H O L D mechanism(in ATN), in whose use an embedded...

• Báo cáo khoa học: "Perplexity Minimization for Translation Model Domain Adaptation in Statistical Machine Translation"

We investigate the problem of domain adaptation for parallel data in Statistical Machine Translation (SMT). While techniques for domain adaptation of monolingual data can be borrowed for parallel data, we explore conceptual differences between translation model and language model domain adaptation and their effect on performance, such as the fact that translation models typically consist of several features that have different characteristics and can be optimized separately.

• Application of Taguchi-grey multi responses optimization on process parameters in electro erosion

(BQ) From the experimental results, it has been found that the electrical conductivity of the tool electrode has the most influencing nature on the machining characteristics in EDM process. The optimal combination of the input process parameters has been obtained using Taguchi-grey relational analysis.

• Báo cáo khoa học: "METONYMY: REASSESSMENT, SURVEY OF ACCEPTABILITY, AND ITS TREATMENT IN A MACHINE TRANSLATION SYSTEM S"

In this article we outline a basic approach to treating metonymy properly in a multilingual machine translation system. This is the first attempt at treating metonymy in an machine translation environment. The approach is guided by the differences of acceptability of metonymy which were obtained by our comparative survey among three languages, English, Chinese, and Japanese. The characteristics of the approach are as follows: (1) Influences of the context, individuals, and familiality with metonymy are not used.

• Investigation on the influence of the dielectrics on the material removal characteristics of EDM

(BQ) A systematical and comprehensive investigation of the material removal characteristics of the electrical discharge machining (EDM) process using various dielectrics as the working fluids was conducted in this work. Five dielectrics, including gaseous dielectrics, air and oxygen, and liquid dielectrics, de-ionized water, kerosene and water-in-oil (W/O) emulsion were used as the working fluids.

• Performance analysis of iso current pulse generator

(BQ) In this research, an iso duration current pulse generator has been proposed to achieve good surface finish. An experimental performance evaluation has been conducted with conventional transistor pulse train generator and modified iso current pulse generator by Taguchi L27 orthogonal array design. The machining characteristics have been evaluated for both the pulse generators. It is found the that modified iso duration current pulse generator has produced better surface quality with higher material removal rate than the conventional transistor pulse train generator.

• Lecture Electromechanical energy conversion: Synchronous machines - Nguyễn Công Phương

This chapter include all of the following content: Introduction to polyphase synchronous machines, synchronous – machine inductances and equivalent circuits, performance characteristics, effects of salient poles, power – angle characteristics of salient – pole machines, permanent – magnet ac motors.

• Text Book of Machine Design P26

CONTENTS CONTENTS 962 C H A P T E R n A Textbook of Machine Design Sliding Contact Bearings 1. Introduction. 2. Classification of Bearings. 3. Types of Sliding Contact Bearings. 4. Hydrodynamic Lubricated Bearings. 5. Assumptions in Hydrodynamic Lubricated Bearings. 6. Important Factors for the Formation of Thick Oil Film. 7. Wedge Film Journal Bearings. 8. Squeeze Film Journal Bearings. 9. Properties of Sliding Contact Bearing Materials. 10. Materials used for Sliding Contact Bearings. 11. Lubricants. 12. Properties of Lubricants. 13. Terms used in Hydrodynamic Journal Bearings. 14.

• Unit_2: Characteristics

Computers are machines designed to process, electronically, specially prepared pieces of information which are termed data. Handling or manipulating the information that has been given to the computer, in such ways as doing calculations, adding information or making comparisons is called processing. Computers are made up of millions of electronic devices capable of storing data or moving them, at enormous speeds, through complex circuits with different functions.

• Text Book of Machine Design P21

CONTENTS CONTENTS Chain Drives C H A P T E R n 759 Chain Drives 1. Introduction. 2. Advantages and Disadvantages of Chain Drive over Belt or Rope Drive. 3. Terms Used in Chain Drive. 4. Relation Between Pitch and Pitch Circle Diameter. 5. Velocity Ratio of Chain Drives. 6. Length of Chain and Centre Distance. 7. Classification of Chains. 8. Hoisting and Hauling Chains. 9. Conveyor Chains. 10. Power Transmitting Chains. 11. Characteristics of Roller Chains. 12. Factor of Safety for Chain Drives. 13. Per missible Speed of Smaller Sprocket. 14. Power Transmitted by Chains. 15.

• A coordinate measuring machine (CMM)

A coordinate measuring machine (CMM) is a device for measuring the physical geometrical characteristics of an object. This machine may be manually controlled by an operator or it may be computer controlled. Measurements are defined by a probe

• Electric Drive Systems and Operation

An electric drive is the electromechanical system that converts electrical energy to mechanical motion. Being a part of automatic equipment, it acts together with the driven object, such as a machine tool, metallurgical, chemical, or flying apparatus, domestic or medical device. Electric drives area includes applications in computers and peripherals, motor starters, transportation (electric and hybrid electric vehicles, subway, etc.

• Machining of Hard Materials

This chapter presents basic knowledge on the special kind of the machining process in which a workpiece material hardened to 45–70 HRC hardness or more is machined with mixed ceramic or CBN tools. An extended comparison with finish grinding, as well with other abrasive finishing processes, is carried out. Specific cutting characteristics, including cutting forces, chip formation mechanisms and tool wear modes with relevant interface temperatures are discussed in terms of process conditions. Currently developing finite element (FE) and analytical modelling is overviewed.

• Fundamentals of Machine Design P41

Rolling contact bearings are also called anti-friction bearing due to its low friction characteristics. These bearings are used for radial load, thrust load and combination of thrust and radial load. These bearings are extensively used due to its relatively lower price, being almost maintenance free and for its operational ease.

• Standard Handbook of Machine Design P47

CHAPTER 40 CAM MECHANISMS Andrzej A. Ol?dzki, D.Sc.f Warsaw Technical University, Poland SUMMARY / 40.1 40.1 CAM MECHANISM TYPES, CHARACTERISTICS, AND MOTIONS / 40.1 40.2 BASIC CAM MOTIONS / 40.6 40.3 LAYOUT AND DESIGN; MANUFACTURING CONSIDERATIONS / 40.17 40.4 FORCE AND TORQUE ANALYSIS / 40.22 40.5 CONTACT STRESS AND WEAR: PROGRAMMING / 40.25 REFERENCES / 40.28 SUMMARY This chapter addresses the design of cam systems in which flexibility is not a consideration. Flexible, high-speed cam systems are too involved for handbook presentation.

• Standard Handbook of Machine Design P50

CHAPTER 43 FLUID POWER SYSTEMS AND CIRCUIT DESIGN Russ Henke, RE. Russ Henke Associates Elm Grove, Wisconsin 43.1 PRESSURE PLOTS / 43.2 43.2 FLOW PLOTS / 43.2 43.3 POWER PLOTS / 43.3 43.4 CYCLE PROFILE / 43.4 43.5 CIRCUIT DESIGN / 43.4 43.6 OPEN-LOOP AND CLOSED-LOOP CIRCUITS / 43.5 43.7 CONSTANT-FLOW VERSUS DEMAND-FLOW CIRCUITS—OPEN LOOP / 43.12 43.8 DEMAND-FLOW CIRCUITS / 43.20 43.9 HYDRAULIC VERSUS PNEUMATIC SYSTEMS / 43.28 43.10 PNEUMATIC CIRCUITS / 43.28 43.11 EFFECT OF FLUID CHARACTERISTICS ON ACTUATOR PERFORMANCE / 43.28 43.