Rf applications

Xem 1-20 trên 37 kết quả Rf applications
  • Tài liệu tham khảo giáo trình thiết kế mạch RF gồm nguyên lí và ứng dựng bằng tiếng anh dành cho sinh viên chuyên ngành điện tử viễn thông

    pdf653p minhnguyenus 28-03-2012 188 90   Download

  • The oscillator in communication and measurement systems, be they radio, coaxial cable, microwave, satellite, radar or optical fibre, defines the reference signal onto which modulation is coded and later demodulated. The flicker and phase noise in such oscillators are central in setting the ultimate systems performance limits of modern communications, radar and timing systems. These oscillators are therefore required to be of the highest quality for the particular application as they provide the reference for data modulation and demodulation. ...

    pdf56p doroxon 16-08-2010 81 18   Download

  • Transmitter and Oscillator Systems A transmitter is an important subsystem in a wireless system. In any active wireless system, a signal will be generated and transmitted through an antenna. The signal’s generating system is called a transmitter. The specifications for a transmitter depend on the applications. For long-distance transmission, high power and low noise are important. For space or battery operating systems, high efficiency is essential. For communication systems, low noise and good stability are required....

    pdf24p vaseline 30-08-2010 65 16   Download

  • Other Wireless Systems The two major applications of RF and microwave technologies are in communications and radar=sensor systems. Radar and communication systems have been discussed in Chapters 7 and 8, respectively. There are many other applications such as navigation and global positioning systems, automobile and highway applications, direct broadcast systems, remote sensing, RF identi®cation, surveillance systems, industrial sensors, heating, environmental, and medical applications. Some of these systems will be discussed brie¯y in this chapter....

    pdf28p vaseline 30-08-2010 84 16   Download

  • OSCILLATOR DESIGN Oscillator circuits are used for generating the periodic signals that are needed in various applications. These circuits convert a part of dc power into the periodic output and do not require a periodic signal as input. This chapter begins with the basic principle of sinusoidal oscillator circuits. Several transistor circuits are subsequently analyzed in order to establish their design procedures.

    pdf64p vaseline 30-08-2010 63 14   Download

  • Advanced Materials and Technologies High-temperature superconductors (HTS), ferroelectrics, micromachining or microelectromechanical systems (MEMS), hybrid or monolithic microwave integrated circuits (MMIC), active filters, photonic bandgap (PBG) materials/structures, and low-temperature cofired ceramics (LTCC) are among recent advanced materials and technologies that have stimulated the rapid development of new microstrip and other filters.

    pdf44p huggoo 20-08-2010 58 13   Download

  • SIGNAL-FLOW GRAPHS AND APPLICATIONS A signal-¯ow graph is a graphical means of portraying the relationship among the variables of a set of linear algebraic equations. S. J. Mason originally introduced it to represent the cause-and-effect of linear systems. Associated terms are de®ned in this chapter along with the procedure to draw the signal-¯ow graph for a given set of algebraic equations. Further, signal-¯ow graphs of microwave networks are obtained in terms of their S-parameters and associated re¯ection coef®cients.

    pdf31p vaseline 30-08-2010 60 13   Download

  • Lowpass and Bandpass Filters Conventional microstrip lowpass and bandpass filters such as stepped-impedance filters, open-stub filters, semilumped element filters, end- and parallel-coupled half-wavelength resonator filters, hairpin-line filters, interdigital and combline filters, pseudocombline filters, and stub-line filters are widely used in many RF/microwave applications. It is the purpose of this chapter to present the designs of these filters with instructive design examples.

    pdf51p huggoo 20-08-2010 64 10   Download

  • Case Study for Mobile Communications Applications Microstrip filters play various roles in wireless or mobile communication systems. This chapter is particularly concerned with a case study of high-temperature superconducting (HTS) microstrip filters for the cellular base station applications. The study starts with a brief discussion of typical HTS subsystems and RF modules, including HTS microstrip filters for cellular base stations.

    pdf25p huggoo 20-08-2010 55 10   Download

  • Compact Filters and Filter Miniaturization Microstrip filters are themselves already small in size compared with other filters such as waveguide filters. Nevertheless, for some applications where the size reduction is of primary importance, smaller microstrip filters are desirable, even though reducing the size of a filter generally leads to increased dissipation losses in a given material and hence reduced performance.

    pdf53p huggoo 20-08-2010 41 9   Download

  • Coupled Resonator Circuits Coupled resonator circuits are of importance for design of RF/microwave filters, in particular the narrow-band bandpass filters that play a significant role in many applications. There is a general technique for designing coupled resonator filters in the sense that it can be applied to any type of resonator despite its physical structure. It has been applied to the design of waveguide filters [1–2], dielectric resonator filters [3], ceramic combline filters [4], microstrip filters [5–7], superconducting filters [8], and micromachined filters [9]. ...

    pdf38p huggoo 20-08-2010 48 8   Download

  • Revised and completely updated, RF/Microwave Circuit Design for Wireless Applications, Second Edition is a unique, state-of-the-art guide to wireless integrated circuit design that provides researchers and engineers with a complete set of modeling, design, and implementation tools for tackling even the newest IC technologies. It emphasizes practical design solutions for high-performance devices and circuitry, incorporating ample examples of novel and clever circuits from high-profile companies.

    pdf972p samsung_12 07-05-2013 34 6   Download

  • The implementation of wireless connectivity is predicated upon the definition of so-called wireless standards, of which GSM, DECT, CDPD, GPRS, and CDMA are examples [7, 8]. Each of these standards embodies the precise set of parameters that dictate the architecture and software design of wireless systems operating under the standard to effect intelligible communicationwith other systems also operating within the standard.

    pdf280p hoang1 31-10-2009 143 62   Download

  • Temperature measurement and control are vital in many industrial processes. Accurate control of the temperature is essential in nearly all chemical processes. In some applications, an accuracy of around 5-10~ may be acceptable. There are also some industrial applications which require better than 4-1 ~ accuracy.

    pdf233p cusonson 21-01-2010 124 54   Download

  • (BQ) Ebook Microwave Engineering emphasizes the fundamental concepts of Maxwell's equations, wave propagation, network analysis and design principles as applied to modern microwave engineering. Applications of microwave engineering are also changing, with increasing emphasis on commercial use of microwave technology for personal communications systems, wireless local area networks, millimeter wave collision avoidance vehicle radars, radio frequency (RF) identification tagging, direct broadcast satellite television, and many other systems related to the information infrastructure.

    pdf756p salink 17-03-2015 36 19   Download

  • During the past decade, several new fabrication techniques have evolved which helped popularize microelectromechanical systems (MEMS), and numerous novel devices have been reported in diverse areas of engineering and science. One such area is microwave and millimeter wave systems. MEMS technology for microwave applications should solve many intriguing problems of high-frequency technology for wireless communications.

    pdf30p longmontran 14-01-2010 73 14   Download

  • Tham khảo tài liệu 'rf mems and their applications p1', kỹ thuật - công nghệ, tự động hoá phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf30p daohuongthon 22-01-2010 66 12   Download

  • As WLANs (Wireless Local Area Networks) become increasingly common, it's becoming vital to be able to test them for proper performance and to optimize their operation. This book, written by a member of the IEEE committee that develops WLAN standards, is the first book addressing that need. It covers test equipment and methods for the RF (wireless) and physical layers of WLAN, protocols, the application layer, and manufacturing testing.

    pdf268p ken333 06-07-2012 57 12   Download

  • The one-way (transmitter to receiver) radar equation is derived in this section. This equation is most commonly used in RWR or ESM type of applications. The following is a summary of the important equations explored in this section:

    pdf8p nguyen4 18-11-2009 53 9   Download

  • Tham khảo tài liệu 'rf mems and their applications p2', kỹ thuật - công nghệ, tự động hoá phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

    pdf20p daohuongthon 22-01-2010 44 8   Download


Đồng bộ tài khoản