Lab FastTrack
89
lượt xem 13
download
lượt xem 13
download
Download
Vui lòng tải xuống để xem tài liệu đầy đủ
To set up a Fast Etherchannel we must configure each of the ports exactly the same. They must be in the same VLAN, the same spanning tree parameters, the same duplex method, the same speed, and so forth. There is also one other requirement that is difficult to obtain from documentation, ALL PORTS IN THE CHANNEL CANNOT BE TRUNKS. If any of the ports we wish to configure in the Channel are set to trunk the Channel will not work. This does not mean we cannot trunk over the Fast Etherchannel, it simply means we must set up trunking after...
Chủ đề:
Bình luận(0) Đăng nhập để gửi bình luận!
CÓ THỂ BẠN MUỐN DOWNLOAD