Cáp chống cháy và biến cháy

Chia sẻ: Lê Văn Đức | Ngày: | Loại File: PDF | Số trang:20

Thêm vào BST

Báo xấu

56
lượt xem 8
download

Download Vui lòng tải xuống để xem tài liệu đầy đủ

Cáp chống cháy và biến cháy sử dụng trong hệ thống điện đóng vai trò là nhân tố quan trọng trong việc giảm sự lây lan của lửa; không sinh ra khói; các thiết bị như đèn tín hiệu, thang máy và hệ thống báo cháy vẫn làm việc khi có cháy, đảm bảo cứu hộ an toàn và thoát hiểm. Để hiểu rõ hơn về loại cáp này mời các bạn tham khảo tài liệu Cáp chống cháy và biến cháy sau đây.

Chủ đề:

Bình luận(0) Đăng nhập để gửi bình luận!

Lưu

Nội dung Text: Cáp chống cháy và biến cháy

LOP THUC HANH THIET KE M&E TAI TP.HCM KHAI GIANG CAC LOP CHUYEN DE M&E THUONG XUYEN Dia diem : 38 Tran Khanh Du – P. Tan Dinh – Q1 – Tp.HCM Ghi danh : Email : info@lopthietkedien.com Phone : 0906561078 Website : http://lopthietkedien.com
LS-VINA Cable is the top leading cable company in the ASEAN as a biggest subsidiary of LS Cable Korea who is No. 3 biggest and advanced cable maker in the world. We are specialized in manufacturing of various power cables, low voltage cables up to 1kV, Medium voltage cables up to 40.5kV, High voltage underground cables up to 230kV, electric wires, Copper/ Aluminum bare conductors, High current capacity conductor, OPGW, watertight cable, fire retardant, non toxic, anti- termite and oil resistant cable..., to meet domestic and overseas demand. Many products were tested by the local and international laboratories as KEMA/Holland, KINECTRICS/Canada, INTERTEK/America, ERDA/India, TUV Rheinland/German ,Quatest 1, Quatest 3... In this catalogue, we offer several fire resistant cables to IEC 60331(or BS 6387) and flame retardant cables to IEC 60332(or BS 4066). LS-VINA Cable lµ c«ng ty s¶n xuÊt c¸p ®iÖn ®øng ®Çu §«ng Nam ¸. Đối tác gãp vèn níc ngoµi lµ LS Cable Hµn quèc mµ hiÖn lµ mét trong 3 nhµ s¶n xuÊt c¸p lín nhÊt thÕ giíi. Chóng t«i cã nhiÒu n¨m kinh nghiÖm s¶n xuÊt c¸p ®iÖn víi ®a d¹ng s¶n phÈm nh c¸p h¹ thÕ ®iÖn ¸p ®Õn 1kV, c¸p trung thÕ ®iÖn ¸p ®Õn 40.5 kV, c¸p ngÇm cao thÕ ®iÖn ¸p ®Õn 230kV, d©y ®iÖn d©n dông c¸c lo¹i, d©y nh«m trÇn, ®ång trÇn, ®Æc biÖt lµ c¸p chÞu dßng t¶i cao, d©y chèng sÐt cã sîi quang (OPGW), c¸p chèng thÊm, chèng ch¸y, kh«ng ®éc, chèng mèi mät vµ chÞu dÇu... ®¸p øng tèt nhu cÇu thÞ trêng trong vµ ngoµi níc. NhiÒu s¶n phÈm ®· ®îc chøng nhËn bëi c¸c phßng thÝ nghiÖm ®éc lËp trong níc vµ Quèc tÕ nh KEMA/Hµ Lan, KINECTRICS/Canada, INTERTEK/Mü, ERDA/Ên §é, TUV Rheinland/§øc, Quatest1, Quatest 3, v.v... Trong catalogue nµy chóng t«i sÏ giíi thiÖu mét sè lo¹i c¸p chèng ch¸y theo IEC 60331(or BS 6387) vµ chèng bÐn ch¸y theo IEC 60332(or BS 4066). Contents/Nội dung Introduction 1 Giíi thiÖu Fire resistant & LSHF fire resistant cables 4 C¸p chèng ch¸y & chèng ch¸y Ýt khãi kh«ng Halogen - 0.6/1kV Unarmoured XLPE cables 5 C¸p XLPE kh«ng cã gi¸p b¶o vÖ 0.6/1kV - 0.6/1kV Single core armoured XLPE cables 6 C¸p XLPE đ¬n pha cã gi¸p b¶o vÖ 0.6/1kV - 0.6/1kV Multi-core armoured XLPE cables 7 C¸p XLPE nhiÒu lâi cã gi¸p b¶o vÖ 0.6/1kV - 600V Insulated wires 8 D©y bäc đ¬n 600V Flame retardant & LSHF Flame retardant cables 9 C¸p chèng bÐn ch¸y & chèng bÐn ch¸y Ýt khãi kh«ng Halogen - 0.6/1kV Unarmoured XLPE cables 10 C¸p XLPE kh«ng cã gi¸p b¶o vÖ 0.6/1kV - 0.6/1kV Single core armoured XLPE cables 11 C¸p XLPE đ¬n pha cã gi¸p b¶o vÖ 0.6/1kV - 0.6/1kV Multi-core armoured XLPE cables 12 C¸p XLPE nhiÒu lâi cã gi¸p b¶o vÖ 0.6/1kV - 600V Insulated wires 13 D©y bäc đ¬n 600V - 0.6/1kV Control Cables 14 C¸p điÒu khiÓn 0.6/1kV Certificate test 17 GiÊy chøng nhËn kiÓm tra
Introduction Specifications Tiªu chuÈn qui ®Þnh Fire Resistant Tests IEC 60331 /BS 6387 Residents, owners and regulatory authorities of buildings are now, more than ever, protected by stringent safety requirements. Electrical installations - particularly fire alarm systems, sprinklers, smoke detection and extraction equipment, emergency lighting and evacuation systems, elevator - all merge Specification performance requirements to prevent harm to people and damage to buildings and equipment. for cables required to maintain circuit integrity The wiring behind the systems prove to be an important factor in preventing under fire conditions. fires from spreading, and stopping smoke from choking off exit points and Quy ®Þnh yªu cÇu thùc hiÖn cho c¸p allowing a safe rescue. If the wiring is adversely affected, the systems lµ duy tr× m¹ch ®iÖn trong ®iÒu kiÖn ch¸y. themselves will have no power to provide their own critical functions. Stringent tests - including IEC 60331, BS 6387 - are performed to ensure that such cables are fire-resistant. In accordance to IEC 60331: o Cable are subjected to fire at 750 C for 3 hours. In not less than twelve hours after the test, the cable shall again be energized, and there shall not be any breakdown. In accordance to BS 6387: Category A - Cable are subjected to fire at 650o C for 3 hours. Category B - Cable are subjected to fire at 750o C for 3 hours. Category C - Cable are subjected to fire at 950o C for 3 hours. Category Z - Cable are subjected to fire at 950o C with mechanical shock for 15 minutes. Category W - Cable are subjected to fire at 650o C for 15 minutes, then at 650o C with water spray for a further 15 minutes. HiÖn nay, c¸c tßa nhµ, chung c hay c«ng tr×nh (Tr¹m ®iÖn, nhµ m¸y...) x©y míi ®Òu ®îc quy ®Þnh nghiªm ngÆt vÒ an toµn ch¸y næ, nªn viÖc l¾p ®Æt c¸c hÖ thèng b¸o ch¸y, thiÕt bÞ ph¸t hiÖn khãi, hÖ thèng ®Ìn cÊp cøu, ®Ìn chíp, tÝn hiÖu, thang m¸y... TÊt c¶ lµ ®Ó b¶o vÖ an toµn tÝnh m¹ng con ngêi vµ tµi s¶n. C¸p chèng ch¸y sö dông trong hÖ thèng ®iÖn ®ãng vai trß lµ nh©n tè quan träng trong viÖc gi¶m sù l©y lan cña löa, kh«ng sinh ra khãi, c¸c thiÕt bÞ nh ®Ìn tÝn hiÖu, thang m¸y vµ hÖ thèng b¸o ch¸y vÉn lµm viÖc khi cã ch¸y, ®¶m b¶o cøu hé an toµn vµ tho¸t hiÓm. NÕu c¸p ®iÖn lµ lo¹i thêng sÏ kh«ng ®¸p øng ®îc yªu cÇu nµy. C¸p ®iÖn dïng trong m¹ch ®iÖn chèng ch¸y sÏ ph¶i tháa m·n thö nghiÖm theo tiªu chuÈn IEC 60331, BS 6387 qui ®Þnh. Thö chèng ch¸y theo IEC 60331: o C¸p ®îc thö ë 750 C cho 3 giê. Sau ®ã ®îc thö l¹i Ýt nhÊt 12 giê, c¸p ®îc ho¹t ®éng b×nh thêng, vµ kh«ng bÞ gi¸n ®o¹n Thö chèng ch¸y theo BS 6387: o Category A - C¸p ®îc thö ë 650 C cho 3 giê. o Category B - C¸p ®îc thö ë 750 C cho 3 giê. Category C - C¸p ®îc thö ë 950o C cho 3 giê. Category Z - C¸p ®îc thö ë 950o C trong sù va ®Ëp c¬ häc cho 15 phót. Category W - C¸p ®îc thö ë 650o C cho 15 phót, sau ®ã phun níc vµ ë 650o C cho thªm 15 phót. 1
Specifications Introduction Tiªu chuÈn qui ®Þnh Flame Propagation Tests IEC 60332 /BS 4066 Tests on electric cables under fire conditions. Part 1 : Tests on a single vertical insulated wire or cable Part 3 : Tests on bunched wires and cables under fire condition. When Projects are constructed (as building, substation, plant...), Cables traverse walls and ceilings to create a web of electrical power. Unfortunately, these cables also act as conduits for fire and heat, so cables must be fashioned of inflammable and self-extinguishing components. This can be achieved by utilising a protective material containing aluminium hydroxide. In the event of fire, the material releases water crystals, and at the same time produces water vapour, which stops the entrance of oxygen and snuffs out the flame. The IEC 60332-3 specification creates a realistic fire situation, and specifies methods for assessing the flame retardance of bunched cables with varying densities of combustible Bunched cables under fire conditions. material. Bã c¸p trong ®iÒu kiÖn ch¸y. This technical report gives details of a test where a number of cables are bunched together to form various test sample installations. 3 tests categories to test different amount of combustible material contained in a bundle of cable. IEC 60332-3-22 - The number of test pieces required to provide a total volume of 7 litres of non-metallic (Former IEC 332-3A) material shall be bunched on a ladder exposed to flame for 40 minutes. IEC 60332-3-23 - The number of test pieces required to provide a total volume of 3.5 litres of non-metallic (Former IEC 332-3B) material shall be bunched on a ladder and exposed to flame for 40 minutes. IEC 60332-3-24 - The number of test pieces required to provide a total volume of 1.5 litres of non-metallic (Former IEC 332-3C) material shall be bunched on a ladder and exposed to flame for 20 minutes. The cable specimens are placed vertically next to each other and then exposed to the flame for a specified duration. After the burning has ceased, the charred or affected portion should not exceed a height of 2.5 meters. KiÓm tra c¸p trong ®iÒu kiÖn ch¸y. PhÇn 1: Thö nghiÖm d©y ®¬n vµ c¸p ®¬n c¸ch ®iÖn ë tr¹ng th¸i th¼ng ®øng PhÇn 2 : Thö nghiÖm trªn bã d©y vµ c¸p trong ®iÒu kiÖn ch¸y. Khi x©y dùng c¸c c«ng tr×nh, dù ¸n (Tßa nhµ, tr¹m ®iÖn, nhµ m¸y...), nhiÒu c¸p ®îc l¾p ®Æt ®i ngang qua têng vµ trÇn t¹o thµnh m¹ng líi cung cÊp ®iÖn cho c¸c c«ng tr×nh ®ã. Khi gÆp ch¸y nh÷ng c¸p ®ã lu«n cã vai trß nh èng dÉn löa vµ nhiÖt. V× vËy c¸p sÏ ®îc chÕ t¹o tõ nh÷ng vËt liÖu khã ch¸y vµ tù t¾t mµ cã hµm lîng hydroxyt nh«m, vËt liÖu nµy sÏ sinh ra nhiÒu tinh thÓ níc, ng¨n ngõa sù tiÕp xóc víi oxy vµ lµm t¾t ngän löa. IEC 332-3 ®a ra mét tr¹ng th¸i ch¸y thùc t¹i, vµ chØ râ ph¬ng ph¸p cho viÖc ®¸nh gi¸ bã c¸p chèng bÐn löa víi lo¹i vËt t cã nhiÒu møc ®é b¾t löa. C¸c tµi liÖu kü thuËt ®a ra cô thÓ phÐp kiÓm tra mµ mét sè c¸p ®îc bã víi nhau t¹o thµnh nhiÒu c¸ch ®Æt mÉu kiÓm tra. Cã 3 møc ®é kiÓm tra tuú theo lîng chÊt ®èt kh¸c nhau thu ®îc trong mét bã c¸p. IEC 60332-3-22 - Sè mÉu yªu cÇu ®Ó cung cÊp mét lîng 7 lÝt vËt liÖu phi kim lo¹i sÏ ®îc bã trªn thang vµ ®èt trong 40 phót. IEC 60332-3-23 - Sè mÉu yªu cÇu ®Ó cung cÊp mét lîng 3,5 lÝt vËt liÖu phi kim lo¹i sÏ ®îc bã trªn thang vµ ®èt trong 40 phót. IEC 60332-3-24 - Sè mÉu yªu cÇu ®Ó cung cÊp mét lîng 1,5 lÝt vËt liÖu phi kim lo¹i sÏ ®îc bã trªn thang vµ ®èt trong 20 phót. C¸c mÉu c¸p ®îc ®Æt th¼ng ®øng c¹nh nhau vµ ®èt trong thêi gian quy ®Þnh. Sau khi t¾t nguån ®èt, phÇn thµnh than sÏ kh«ng vît qu¸ 2,5 mÐt. 2
 Introduction Specifications Tiªu chuÈn qui ®Þnh Acid Gas Emission Tests IEC 60754 /BS 6425 Test on gases evolved during combustion of electric cables. A fire can produce corrosive halogen gases, generated by burning PVC or chlorine containing material. HCI gas combines with the water in the eyes, mouth, throat, nose and lungs to form hydrochloric acid, which contributes to loss of co-ordination and orientation. This in turn can lead to a feeling of panic and inability to exit the building, thus increasing potential fatalities by inhalation of carbon monoxide and oxygen depletion. Additional dangers exist in a fire situation. Chlorine, bromine or fluorine, found in building materials, can combine with the condensation on all metallic materials in the proximity of a fire thus resulting in high levels of corrosion which will damage computers and office machines. Structural ferrous metals can be so corroded that the building has to be demolished. IEC 60754-2 or BS 6425 specifies a method in determining the degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity. This standard requires the weighted pH value of not less than 4.3 when related to 1 litre of water, and the weighted value of conductivity should not exceed 10 mS/mm. KiÓm tra sù sinh khÝ trong khi c¸p ch¸y Löa ch¸y cã thÓ sinh ra Halogen do viÖc ®èt ch¸y PVC hay c¸c nguyªn liÖu kh¸c. KhÝ HCL kÕt hîp víi níc trong m¾t mòi miÖng, h¬i thë vµ phæi sÏ t¹o thµnh axit hidrochloric g©y mÊt ph¬ng híng ë con ngêi. §iÒu nµy sÏ g©y ra sù ho¶ng lo¹n do vËy kh«ng thÓ tù tho¸t ra khái ®¸m ch¸y vµ lµm t¨ng nguy c¬ tö vong v× suy h« hÊp do hÝt ph¶i khÝ carbon monoxit. H¬n n÷a, trong khi ch¸y c¸c chÊt chlorine, bromine hay fluorine cã trong c¸c vËt liÖu cña toµ nhµ kÕt hîp víi c¸c vËt liÖu kim lo¹i ë xung quanh lµm háng hÖ thèng m¸y tÝnh, thiÕt bÞ v¨n phßng vµ lµm ph¸ hñy toµn bé toµ nhµ. IEC 60754-2 qui ®Þnh ph¬ng ph¸p tÝnh ®é acid cña khÝ trong qu¸ tr×nh ®èt ch¸y vËt liÖu trªn c¸p b»ng c¸ch ®o ®é pH vµ ®é dÉn ®iÖn. m S/mm. Ph¬ng ph¸p nµy qui ®Þnh tû träng cña pH kh«ng nhá h¬n 4,3 trong 1lÝt níc, vµ ®é dÉn ®iÖn kh«ng vît qu¸ 10m Smoke Emission Tests IEC 61034 /BS 7622 Measurement of smoke density of electric cables burning under defined conditions. Smoke hinders fire-fighting efforts and prevents safe evacuation from the building. Smoke extraction equipment helps, but low smoke products can stop the problem before it starts. Conventional insulation and sheathing materials such as polyvinyl chloride (PVC) can produce large volumes of smoke when burned, thus contributing to disorientation and smoke inhalation damage. Measuring the density of smoke produced by burning cables is important as it is related to the evacuation of people and accessibility for fire fighting. The “3 meter cube test” (also known as IEC 61034 or BS 7622) measures the amount of smoke created by cables in the event of a fire. A one-meter length of cable is placed in a 3m2 enclosure, and exposed to a beam of light through a clear window. This light travels across the enclosure to a photocell connected to recording equipment in the window on the other end. A fire is then generated within the container and the minimum light transmission recorded. A minimum light transmission value greater than 60% is acceptable. §o mËt ®é khãi khi c¸p ch¸y sinh ra Khãi g©y c¶n trë cho viÖc ch÷a ch¸y vµ di chuyÓn d©n c khái vÞ trÝ ®¸m ch¸y. ThiÕt bÞ hót khãi cã thÓ h¹n chÕ ®îc khãi, nhng viÖc sö dông c¸c lo¹i s¶n phÈm cã hµm lîng khãi Ýt cã thÓ ng¨n chÆn nguy c¬ nµy ngay tõ ®Çu. VËt liÖu c¸ch ®iÖn vµ vá bäc th«ng thêng nh PVC cã thÓ s¶n sinh ra lîng khãi lín khi ch¸y, nh vËy sÏ g©y ra sù mÊt ph¬ng híng vµ tæn h¹i do hÝt khãi. ViÖc ®o mËt ®é khãi sinh ra khi ®èt lµ rÊt quan träng bëi nã liªn quan tíi viÖc di t¶n cña con ngêi vµ kh¶ n¨ng tiÕp cËn ch÷a ch¸y. §o lîng khãi sinh ra trong buång kÝn (3 m3) khi c¸p ®îc ®èt (theo IEC 61034 or BS 7622). Mét mÐt chiÒu dµi c¸p ®îc ®Æt trong buång réng 3m2 vµ dÔ quan s¸t buång s¸ng th«ng qua èng kÝnh râ nÐt. Nguån s¸ng nµy sÏ xuyªn qua buång tíi mét tÕ bµo quang ®îc nèi víi thiÕt bÞ ghi trong èng kÝnh phÝa ®Çu kia. Mét ngän löa ®îc ph¸t ra sau ®ã vµ ghi l¹i møc ¸nh s¸ng truyÒn ®i. ¸nh s¸ng truyÒn ®i nhá nhÊt ph¶i lín h¬n 60%. 3
fire resistant & lshf fire resistant cables Cáp chống cháy và chống cháy ít khói không Halogen LOP THUC HANH THIET KE M&E TAI TP.HCM KHAI FeatureGIANG: CAC LOP CHUYEN DE M&E THUONG XUYEN DiaAlthrough diem : 38 Tran Khanh Du – P. Tan Dinh – Q1 – Tp.HCM Safety is main features of electric cable in installation especially in the performance of cable under fire condition. cables seldom cause fire, can be a carrier of fire and spread the fire throughout the installation or equipment. GhiFire danh : Email resistant cables : info@lopthietkedien.com of LS-VINA Cable can maintain essential circuits as light, fire alarm equipment when fire occur and critical areas of an installation, tunnels, mass rapid transit system, oil-rigs, oil refineries... Phone : 0906561078 Low Smoke Halogen Free Fire resistant cable: Website It does not liberate : http://lopthietkedien.com large volume of dense black smoke in fire condition, improve safety in area where there are limited means of escape in the event of an emergency. It does not emit any halogen gases when the cables is on fire. There are acidic and will attack equipment and human being. Applied standards IEC 60502: Structure and dimension IEC 60331 (or BS 6387): Fire resistance IEC 60332-1: Flame retardant (Single vertical) IEC 754-1 & 2 (or BS 6425): Halogen Free Properties IEC 61034-2 (or BS 7622): Low Smoke Properties §¨c ®iÓm: An toµn sö dông lµ ®Æc ®iÓm c¨n b¶n cña d©y vµ c¸p ®iÖn, ®Æc biÖt khi cã ho¶ ho¹n, mÆc dï c¸p Ýt khi lµ t¸c nh©n g©y ch¸y nhng c¸p ®iÖn sÏ lµ vËt dÉn ®iÖn ®Õn nhµ cöa vµ thiÕt bÞ. C¸p chèng ch¸y cña LS-VINA Cable sÏ kh¾c phôc ®iÒu nµy, cã thÓ duy tr× c¸c m¹ch ®iÖn thiÕt yÕu nh chiÕu s¸ng, thiÕt bÞ b¸o ch¸y khi x¶y ra ch¸y vµ c¸c khu vùc nh¹y c¶m cña c¸c c«ng tr×nh, ®êng hÇm, hÖ thèng trung chuyÓn hµnh kh¸ch, dµn khoan, nhµ m¸y läc dÇu... C¸p chèng ch¸y Ýt khãi vµ kh«ng cã Halogen: C¸p Ýt khãi (LS) khi gÆp löa kh«ng sinh ra nhiÒu khãi gi÷ an toµn cho nh÷ng khu vùc ®«ng ngêi dÔ tho¸t hiÓm. C¸p kh«ng sinh khãi Halogen (HF)Khi ch¸y kh«ng sinh khÝ Halogen nªn kh«ng t¹o acid clohydric lµm h¹i cho ngêi vµ thiÕt bÞ. TI£U CHUÈN ¸P DôNG IEC 60502: KÕt cÊu vµ kÝch thíc IEC 60331 (or BS 6387): Chèng ch¸y IEC 60332-1: Chèng bÐn löa (§¬n th¼ng ®øng) IEC 754-1 & 2 (or BS 6425): §Æc tÝnh Halogen IEC 61034-2 (or BS 7622): §Æc tÝnh Ýt khãi 4
0.6/1 kv fire resistant cable C¸p chèng ch¸y 0.6/1 kV IEC 60331/BS 6387 Unarmoured XLPE cable - C¸p XLPE kh«ng cã gi¸p b¶o vÖ Cross- Diameter of Thickness Thickness of outer Approx. overall diameter Approx. weight of cable sectional conductor of sheath §êng kÝnh tæng Khèi lîng c¸p gÇn ®óng area insulation ChiÒu dµy vá bäc TiÕt diÖn §êng kÝnh ChiÒu dµy (mm) (mm) (kg/km) danh ®Þnh lâi c¸ch ®iÖn (mm2) (mm) (mm) 1c 2c 3c 4c 1c 2c 3c 4c 1c 2c 3c 4c 1.5 1.56 0.7 1.4 1.5 1.5 1.5 7.0 11.0 11.5 12.5 60 125 150 170 2.5 2.01 0.7 1.4 1.5 1.5 1.5 7.5 13.5 14 15 80 195 230 285 4 2.55 " " " " " 8 14 15 17 99 235 295 360 6 3.12 0.7 1.4 1.8 1.8 1.8 9 15 16 18 125 290 370 455 10 4.05 " " " " " 10 18 19 20 170 410 520 660 16 5.1 " 1.4 1.8 1.8 1.8 11 19 20 22 230 530 700 880 25 6.3 0.9 " " " " 12 22 24 26 330 760 1,020 1,300 35 7.5 0.9 " " " " 13 24 26 29 430 1,000 1,350 1,680 50 9.0 1.0 " " " 1.9 15 27 29 32 550 1,280 1,750 2,220 70 10.7 1.1 " " 1.9 2.0 16 31 33 37 760 1,760 2,430 3,120 95 12.5 1.1 1.5 2.0 2.0 2.1 19 34 37 41 1,030 2,330 3,250 4,190 120 14.0 1.2 1.5 2.1 2.1 2.3 20 38 41 45 1,270 2,920 4,030 5,210 150 15.8 1.4 1.6 2.2 2.3 2.4 22 42 45 50 1,560 3,550 4,950 6,380 185 17.5 1.6 1.6 2.3 2.4 2.6 24 46 50 55 1,920 4,400 6,150 7,970 240 20.2 1.7 1.7 2.5 2.6 2.8 27 51 55 62 2,540 5,580 7,960 10,320 300 22.5 1.8 1.8 2.7 2.8 3.0 29 57 61 68 3,080 7,020 9,890 12,820 400 26.1 2.0 1.9 2.9 3.0 3.3 33 63 68 76 3,920 8,960 12,600 16,400 500 28.8 2.2 2.0 3.1 3.3 3.5 37 - - - 5,110 - - - 630 33.0 2.4 2.2 - - - 42 - - - 6,680 - - - Construction/KÕt cÊu 1. Conductor/Lâi dÉn ®iÖn : Copper/§ång 2. Fire proof/Líp chèng ch¸y : Special mica tape Applied spec.: 3. Insulation/Líp c¸ch ®iÖn : XLPE Tiªu chuÈn ¸p dông Iec 60502 4. Filler/Líp ®én IEC 60331/BS 6387 5. Outer sheath/Vá bäc ngoµi : FR-PVC or LSHF LSHF: Low Smoke Halogen Free Fire resistant 5
0.6/1 kv fire resistant cable C¸p chèng ch¸y 0.6/1 kV IEC 60331/BS 6387 Single core armoured XLPE cable - C¸p ®¬n pha cã gi¸p Nom. Cross- Diameter of Thickness of Diameter of Thickness of outer Approx. overall Approx. weight of cable sectional area conductor insulation amour wire sheath diameter Khèi lîng c¸p TiÕt diÖn §êng kÝnh ChiÒu dµy §êng kÝnh sîi gi¸p ChiÒu dµy vá bäc §êng kÝnh tæng gÇn ®óng danh ®Þnh lâi dÉn c¸ch ®iÖn (mm) (mm) (mm) (kg/km) (mm2) (mm) (mm) Single core - C¸p ®¬n 6 3.12 0.7 0.9 1.8 13 250 10 4.05 " " " 14 290 16 5.1 " 0.9 1.8 14 350 25 6.3 0.9 " " 17 490 35 7.5 0.9 " " 17 610 50 9.0 1.0 1.25 " 19 750 70 10.7 1.1 1.25 " 20 985 95 12.5 1.1 1.25 1.8 23 1,270 120 14.0 1.2 1.6 " 25 1,650 150 15.8 1.4 1.6 " 28 1,960 185 17.5 1.6 1.6 " 29 2,370 240 20.2 1.7 1.6 1.9 33 3,030 300 22.5 1.8 1.6 2.0 36 3,680 400 26.1 2.0 2.0 2.1 40 4,760 500 28.8 2.2 2.0 2.2 45 5,890 630 33.0 2.4 2.0 2.3 48 7,350 Construction/KÕt cÊu 1. Conductor/Lâi dÉn ®iÖn : Copper/§ång 2. Fire proof/Líp chèng ch¸y : Special mica tape 3. Insulation/Líp c¸ch ®iÖn : XLPE Applied spec. : Tiªu chuÈn ¸p dông 4. Inner sheath/Bäc lãt : FR-PVC or LSHF Iec 60502 5. Armoured/Gi¸p : Al. wire/Sîi nh«m IEC 60331/BS 6387 6. Outer sheath/Vá bäc ngoµi : FR-PVC or LSHF LSHF: Low Smoke Halogen Free Fire resistant 6
0.6/1 kv Fire resistant cable C¸p chèng ch¸y 0.6/1 kV IEC 60331/BS 6387 Multi-core armoured XLPE cable - C¸p XLPE nhiÒu lâi cã gi¸p Nominal Diameter Thickness cross- of of Armour - Gi¸p Thickness of Approx. Overall Approx. weight of cable sectional conductor insulation outer sheath diameter Tape - B¨ng Wire - Sîi Khèi lîng c¸p area ChiÒu dµy vá bäc §êng kÝnh tæng gÇn ®óng TiÕt diÖn §êng kÝnh ChiÒu dµy Thickness(mm) Diameter(mm) danh ®Þnh lâi dÉn c¸ch ®iÖn ChiÒu dµy §êng kÝnh (mm) (mm) (kg/km) 2 (mm ) (mm) (mm) 2c 3c 4c 2c 3c 4c 2c 3c 4c 2c 3c 4c 2c 3c 4c 1.5 1.56 0.7 - - - 0.9 0.9 0.9 1.8 1.8 1.8 15.5 16 17 420 450 470 2.5 2.01 0.7 - - 0.2 0.9 0.9 0.9 1.8 1.8 1.8 16.5 17 18 460 500 550 4 2.55 0.7 0.2 0.2 0.2 0.9 0.9 0.9 1.8 1.8 1.8 18 19 20 510 570 660 6 3.12 0.7 0.2 0.2 0.2 0.9 0.9 0.9 1.8 1.8 1.8 19 20 21 580 670 770 10 4.05 " 0.2 0.2 0.2 " " " " " " 20 21 22 720 850 1,020 16 5.1 " 0.2 0.2 0.2 0.9 0.9 0.9 1.8 1.8 1.8 22 23 24 870 1,060 1,270 25 6.3 0.9 “ " " 1.6 1.6 1.6 " " " 27 28 29 1,490 1,770 2,120 35 7.5 0.9 " " " 1.6 1.6 1.6 " " 1.9 29 30 32 1,790 2,260 2,660 50 9.0 1.0 " " " 1.6 1.6 1.6 " 1.9 2.0 31 32 35 2,170 2,730 3,310 70 10.7 1.1 " " " 1.6 2.0 2.0 2.0 2.0 2.1 35 37 41 2,790 3,800 4,690 95 12.5 1.1 " 0.5 0.5 2.0 2.0 2.0 2.1 2.2 2.3 42 43 46 3,820 4,850 5,990 120 14.0 1.2 0.5 " " " " 2.5 2.2 2.3 2.5 45 48 52 4,580 5,850 7,820 150 15.8 1.4 " " " " 2.5 2.5 2.3 2.5 2.6 47 54 56 5,410 7,480 9,280 185 17.5 1.6 " " " 2.5 2.5 2.5 2.5 2.6 2.8 54 58 63 6,990 8,990 11,320 240 20.2 1.7 " " " 2.5 2.5 2.5 2.7 2.8 3.0 59 64 69 8,710 11,380 14,232 300 22.5 1.8 0.5 0.5 0.5 2.5 2.5 2.5 2.8 3.0 3.2 67 71 77 10,540 13,640 17,200 400 26.1 2.0 " " " 2.5 2.5 2.5 3.1 3.2 3.5 72 77 85 12,850 16,850 22,450 500 28.8 2.2 0.5 0.5 0.8 3.15 3.15 3.15 3.3 3.5 3.8 80 89 97 16,750 21,940 27,770 Construction/KÕt cÊu 1. Conductor/Lâi dÉn ®iÖn : Copper/§ång 2. Fire proof/Líp chèng ch¸y : Special mica tape Applied spec. : 3. Insulation/Líp c¸ch ®iÖn : XLPE Tiªu chuÈn ¸p dông 4. Filler/Líp ®én Iec 60502 5. Inner sheath/Bäc lãt : FR-PVC or LSHF IEC 60331/BS 6387 6. Armoured/Gi¸p : Steel wire or Tape/ Sîi hoÆc B¨ng thÐp 7. Outer sheath/Vá bäc ngoµi : FR-PVC or LSHF LSHF: Low Smoke Halogen Free Fire resistant 7
0.6/1 kv fire resistant wire D©y c¸p chèng ch¸y 0.6/1 kv IEC 60331/BS 6387 Single insulated wire - D©y bäc ®¬n Nominal Diameter Thickness Approx. Overall Approx weight D.C Cond. area of conductor of insulation diameter Resistance TiÕt diÖn §êng kÝnh §é dµy §êng kÝnh at 20oC Khèi lîng danh ®Þnh lâi c¸ch ®iÖn tæng gÇn ®óng §iÖn trë DC (mm2) (mm) (mm) (mm) (kg/km) ( /km) 2.5 2.01 (7/0.67) 0.8 4.4 40 7.41 4 2.55 (7/0.85) 1.0 5.3 62 4.61 6 3.12 (7/1.04) 1.0 5.9 82 3.08 10 4.05 (7/1.35) 1.0 6.8 122 1.83 16(*) 4.7 1.0 7.9 188 1.15 25 5.9 1.2 9 275 0.727 35 7.0 1.2 10 362 0.524 50 8.1 1.4 13 526 0.387 70 9.8 1.4 14 725 0.268 95 12.5 1.6 17 984 0.193 120 14.0 1.6 19 1,320 0.153 150 15.8 1.8 21 1,590 0.124 185 17.5 2.0 23 1,910 0.0991 240 20.2 2.2 26 2,530 0.0754 300 22.5 2.4 29 3,170 0.0601 400 26.1 2.6 33 4,190 0.0470 500 28.8 2.8 36 4,150 0.0366 (*) 16mm2 to 500mm2 are compact round or strand(16 mm 2 ®Õn 500mm 2 lµ lâi nÐn hoÆc bÖn trßn) Construction/KÕt cÊu 1. Conductor/Lâi dÉn ®iÖn : Copper/§ång Applied spec. : 2. Fire proof/Líp chèng ch¸y : Special mica tape Tiªu chuÈn ¸p dông Iec 60502 3. Outer sheath/Vá bäc ngoµi : FR-PVC or LSHF IEC 60331/BS 6387 LSHF: Low Smoke Halogen Free Fire resistant 8
Flame retardant & LSHF Flame retardant cables Cáp chống bén cháy và chống bén cháy ít khói Feature : Flame resistant cables of LS-VINA Cable can prevent spread of fire when fire occur, specially it is areas of an installation, tunnels, crowded areas... Low Smoke Halogen Free Flame resistant cable for safety purpose to escape in the event of an emergency. Applied standards IEC 60502: Structure and dimension IEC 60332-1: Flame retardant (Single vertical) IEC 60332-3(or BS 4066): Flame retardant IEC 754-1 & 2 (or BS 6425): Halogen Free Properties IEC 61034-2 (or BS 7622): Low Smoke Properties ĐÆc ®iÓm: C¸p chèng bÐn ch¸y cña LS-VINA Cable cã ®Æc ®iÓm truyÒn löa chËm sÏ c¶n trë kh«ng cho löa lan to¶ khi cã ch¸y, ®Æc biÖt lµ c¸c khu vùc nh¹y c¶m cña c¸c c«ng tr×nh, ®êng hÇm, khu ®«ng ngêi... C¸p chèng bÐn löa Ýt khãi vµ kh«ng cã khÝ Halogen víi môc ®Ých gi÷ an toµn dÔ dµng tho¸t hiÓm khi cã ho¶ ho¹n. Tiªu chuÈn ¸p dông IEC 60502: KÕt cÊu vµ kÝch thíc IEC 60332-1: Chèng bÐn löa (§¬n th¼ng ®øng) IEC 60332-3(or BS 4066): Chèng bÐn löa IEC 754-1 & 2 (or BS 6425): §Æc tÝnh Halogen IEC 61034-2 (or BS 7622): ĐÆc tÝnh Ýt khãi Cables - C¸p Burner - Vßi ®èt Burner - Vßi ®èt Vertical mounted on ladder Bè trÝ m¸ng th¼ng ®øng 9
0.6/1 kv flame retardant cable C¸p chèng bÐn ch¸y 0.6/1 kV IEC 60332/BS 4066 Unarmoured XLPE cable - C¸p XLPE kh«ng cã gi¸p b¶o vÖ Nom. cross- Diameter of Thickness Thickness of outer Approx. overall Approx. weight of cable sectional area conductor of insulation sheath diameter TiÕt diÖn §êng kÝnh ChiÒu dµy ChiÒu dµy vá bäc §ưêng kÝnh tæng Khèi lîng c¸p gÇn ®óng danh ®Þnh lâi c¸ch ®iÖn (mm) (mm) (kg/km) 2 (mm ) (mm) (mm) 1c 2c 3c 4c 1c 2c 3c 4c 1c 2c 3c 4c 1.5 1.56 0.7 1.4 1.8 1.8 1.8 7 11 12 12.5 50 130 160 180 2.5 2.01 " " " " " 7 12 13 13.5 65 170 200 240 4 2.55 " " " " " 8 13 14 15 80 210 260 320 6 3.12 " " " " " 8 14 15 16 110 280 330 420 10 4.05 " " " " " 9 16 17 18 150 370 480 610 16 5.1 " 1.4 1.8 1.8 1.8 10 17 18 20 210 500 660 830 25 6.3 0.9 " " " " 11 21 22 24 310 730 990 1,260 35 7.5 0.9 " " " " 12 23 24 27 410 960 1,350 1,660 50 9.0 1.0 " " " 1.9 14 26 27 30 540 1,250 1,710 2,210 70 10.7 1.1 " " 1.9 2.0 16 29 32 35 750 1,730 2,400 3,210 95 12.5 1.1 1.5 2.0 2.0 2.1 18 33 36 39 1,010 2,330 3,220 4,210 120 14.0 1.2 1.5 2.1 2.1 2.3 19 37 39 44 1,270 2,920 4,060 5,300 150 15.8 1.4 1.6 2.2 2.3 2.4 21 41 44 49 1,560 3,580 5,020 6,530 185 17.5 1.6 1.6 2.3 2.4 2.6 23 45 49 54 1,940 4,450 6,230 8,170 240 20.2 1.7 1.7 2.5 2.6 2.8 26 51 55 61 2,540 5,850 8,200 10,710 300 22.5 1.8 1.8 2.7 2.8 3.0 29 57 61 68 3,160 7,270 10,200 13,320 400 26.1 2.0 1.9 2.9 3.0 3.3 32 63 68 76 4,010 9,170 12,890 17,000 500 28.8 2.2 2.0 3.1 3.3 3.5 36 71 76 85 5,110 11,680 16,530 21,680 630 33.0 2.4 2.2 - - - 42 - - - 6,680 - - - Construction/KÕt cÊu 1. Conductor/Lâi dÉn ®iÖn : Copper/§ång 2. Insulation/Líp c¸ch ®iÖn : XLPE Applied spec. : 3. Filler/Líp ®én Tiªu chuÈn ¸p dông Iec 60502 4. Outer sheath/Vá bäc ngoµi : FR-PVC or LSHF IEC 60332/BS 4066 LSHF: Low Smoke Halogen Free Flame retardant 10
0.6/1 kv flame retardant cable C¸p chèng bÐn ch¸y 0.6/1 kV IEC 60332/BS 4066 Single core armoured XLPE cable - C¸p XLPE ®¬n pha cã gi¸p Nom. cross- Diameter of Thickness of Diameter of Thickness of outer Approx. overall Approx. weight of cable sectional area conductor insulation armour wire sheath diameter Khèi lîng c¸p TiÕt diÖn §êng kÝnh ChiÒu dµy §êng kÝnh sîi gi¸p ChiÒu dµy vá bäc §êng kÝnh tæng gÇn ®óng danh ®Þnh lâi dÉn c¸ch ®iÖn (mm) (mm) (mm) (kg/km) (mm2) (mm) (mm) Single core 6 3.12 0.7 0.9 1.8 12 240 10 4.05 " " " 13 280 16 5.1 " 0.9 1.8 14 340 25 6.3 0.9 " " 16 470 35 7.5 0.9 " " 17 580 50 9.0 1.0 " " 18 720 70 10.7 1.1 " " 20 960 95 12.5 1.1 0.9 1.8 22 1,230 120 14.0 1.2 1.6 " 25 1,610 150 15.8 1.4 1.6 " 27 1,920 185 17.5 1.6 1.6 " 29 2,330 240 20.2 1.7 1.6 1.9 32 2,980 300 22.5 1.8 1.6 2.0 34 3,630 400 26.1 2.0 2.0 2.1 39 4,670 500 28.8 2.2 2.0 2.2 43 5,780 630 33.0 2.4 2.0 2.3 46 7,230 Construction/KÕt cÊu 1. Conductor/Lâi dÉn ®iÖn : Copper/§ång 2. Insulation/Líp c¸ch ®iÖn : XLPE 3. Inner sheath/Bäc lãt : FR-PVC or LSHF Applied spec. : Tiªu chuÈn ¸p dông 4. Armoured/Gi¸p : Al. wire/Sîi nh«m Iec 60502 5. Outer sheath/Vá bäc ngoµi : FR-PVC or LSHF IEC 60332/BS 4066 LSHF: Low Smoke Halogen Free Flame retardant 11
0.6/1 kv flame retardant cable C¸p chèng bÐn ch¸y 0.6/1 kV IEC 60332/BS 4066 Multi-core armoured XLPE cable - C¸p XLPE nhiÒu lâi cã gi¸p Nominal Diameter Thickness Thickness of Approx. Overall Approx. weight of cable cross- of of Armour - Gi¸p outer sheath diameter sectional conductor insulation Tape - B¨ng Wire - Sîi Khèi lîng c¸p area ChiÒu dµy vá bäc §êng kÝnh tæng gÇn ®óng TiÕt diÖn §êng kÝnh ChiÒu dµy Thickness(mm) Diameter(mm) danh ®Þnh lâi dÉn c¸ch ®iÖn ChiÒu dµy §êng kÝnh (mm) (mm) (kg/km) (mm2) (mm) (mm) 2c 3c 4c 2c 3c 4c 2c 3c 4c 2c 3c 4c 2c 3c 4c 1.5 1.56 0.7 - - - 0.9 0.9 0.9 1.8 1.8 1.8 14.5 15 16 350 350 420 2.5 2.01 0.7 - - - 0.9 0.9 0.9 " " " 15.5 16 17 410 450 500 4 2.55 0.7 - - - 0.9 0.9 0.9 " " 1.8 16 17 18 470 530 610 6 3.12 0.7 0.2 0.2 0.2 0.9 0.9 0.9 " 1.8 1.8 17 18 19 570 660 760 10 4.05 0.7 0.2 0.2 0.2 0.9 0.9 0.9 1.8 1.8 1.8 20 21 22 710 830 990 16 5.1 " 0.2 0.2 0.2 0.9 0.9 0.9 1.8 1.8 1.8 21 22 24 850 1,040 1,240 25 6.3 0.9 " " " 1.6 1.6 1.6 " " " 26 27 29 1,460 1,740 2,090 35 7.5 0.9 " " " 1.6 1.6 1.6 " " 1.9 28 30 32 1,750 2,220 2,600 50 9.0 1.0 " " " 1.6 1.6 1.6 " 1.9 2.0 31 32 35 2,130 2,660 3,260 70 10.7 1.1 " " " 1.6 2.0 2.0 2.0 2.0 2.1 35 37 41 2,760 3,750 4,640 95 12.5 1.1 " 0.5 0.5 2.0 2.0 2.0 2.1 2.2 2.3 40 42 46 3,770 4,800 5,940 120 14.0 1.2 0.5 " " " " 2.5 2.2 2.3 2.5 43 46 52 4,530 5,790 7,760 150 15.8 1.4 " " " " 2.5 2.5 2.3 2.5 2.6 47 52 56 5,350 7,420 9,220 185 17.5 1.6 " " " 2.5 2.5 2.5 2.5 2.6 2.8 53 56 62 6,940 8,920 11,120 240 20.2 1.7 " " " 2.5 2.5 2.5 2.7 2.8 3.0 59 63 69 8,640 11,180 14,132 300 22.5 1.8 0.5 0.5 0.5 2.5 2.5 2.5 2.8 3.0 3.2 65 69 76 10,440 13,540 17,050 400 26.1 2.0 " " " 2.5 2.5 2.5 3.1 3.2 3.5 71 76 85 12,740 16,700 22,340 500 28.8 2.2 0.5 0.5 0.8 3.15 3.15 3.15 3.3 3.5 3.8 80 86 96 16,650 21,820 27,670 Construction/KÕt cÊu 1. Conductor/Lâi dÉn ®iÖn : Copper/§ång 2. Insulation/Líp c¸ch ®iÖn : XLPE Applied spec. : 3. Filler/Líp ®én Tiªu chuÈn ¸p dông 4. Inner sheath/Bäc lãt : FR-PVC or LSHF Iec 60502 IEC 60332/BS 4066 5. Armoured/Gi¸p : Steel wire or Tape/ Sîi hoÆc B¨ng thÐp 6. Outer sheath/Vá bäc ngoµi : FR-PVC or LSHF LSHF: Low Smoke Halogen Free Flame retardant 12
0.6/1 kv flame retardant wire D©y c¸p chèng bÐn ch¸y 0.6/1 kv IEC 60332/BS 4066 Reference spec. : iec 60502, IEC 60332, BS 4066 1. Conductor: Copper Lâi dÉn ®iÖn 2. Sheath insulation: FR-PVC/LSHF Líp vá c¸ch ®iÖn LSHF: Low Smoke Halogen Free Flame retardant Single insulated wire - D©y bäc ®¬n Nominal Diameter Thickness Approx. Approx weight D.C Cond. Resistance at 20oC area of conductor of insulation overall diameter Khèi lưîng gÇn ®óng §iÖn trë DC (kg/km) ( /km) TiÕt diÖn §ưêng kÝnh §é dµy §ưêng kÝnh danh ®Þnh lâi c¸ch ®iÖn tæng Cu conductor Cu conductor Lâi ®ång Lâi ®ång (mm2) (mm) (mm) (mm) 1.5 1.56 (7/0.52) 0.8 3.4 23 12.1 2.5 2.01 (7/0.67) 0.8 3.8 34 7.41 4 2.55 (7/0.85) 1.0 4.8 54 4.61 6 3.12 (7/1.04) 1.0 5.3 75 3.08 10 4.05 (7/1.35) 1.0 6.3 110 1.83 16 (*) 4.7 1.0 7.3 175 1.15 25 5.9 1.2 9 260 0.727 35 7.0 1.2 10 360 0.524 50 8.1 1.4 12 510 0.387 70 9.8 1.4 14 700 0.268 95 12.5 1.6 16 960 0.193 120 14.0 1.6 18 1,190 0.153 150 15.8 1.8 20 1,500 0.124 185 17.5 2.0 22 1,850 0.0991 240 20.2 2.2 25 2,450 0.0754 300 22.5 2.4 28 3,040 0.0601 400 26.1 2.6 32 4,070 0.0470 500 28.8 2.8 35 4,800 0.0366 (*) 16mm2 to 500mm2 are compact round or strand(16 mm 2 ®Õn 500mm 2 lµ lâi nÐn hoÆc bÖn trßn) 13
0.6/1 kv flame retardant cable c¸p chèng bÐn ch¸y 0.6/1 kv IEC 60332/BS 4066 Control cable - C¸p ®iÒu khiÓn D.C Cond. Insulation Approx. weight No. of Conductor - Lâi dÉn Insulation Sheath thickness Approx. Overall Dia. Resistance Resistance Khèi lưîng c¸p Cores thickness §é dµy vá bäc §ưêng kÝnh ngoµi at 20oC at 20oC gÇn ®óng Sè lâi Nom. area Structure Diameter §é dµy §iÖn trë TiÕt diÖn KÕt cÊu §öêng kÝnh c¸ch ®iÖn (mm) (mm) §iÖn trë DC c¸ch ®iÖn (kg/km) (mm2) (No/mm) (mm) (mm) CVV* CVV-S* CVV* CVV-S* ( /km) (M. /Km) CVV CVV-S 1.5 7/ 0.52 1.56 0.8 1.5 1.5 10.0 10.5 12.1 50 125 140 2 7/ 0.6 1.8 0.8 1.5 1.5 10.5 11.0 9.24 50 130 160 2 2.5 7/ 0.67 2.01 0.8 1.5 1.5 11.0 12.0 7.41 50 150 180 3.5 7/ 0.8 2.4 0.8 1.5 1.5 11.5 12.5 5.20 50 180 210 5.5 7/ 1.0 3.0 1.0 1.5 1.5 13.5 14.5 3.33 50 250 270 8 7/ 1.2 3.6 1.2 1.5 1.5 15.5 16.5 2.31 50 340 385 1.5 7/ 0.52 1.56 0.8 1.5 1.5 10.5 11.0 12.1 50 135 160 3 2 7/ 0.6 1.8 0.8 1.5 1.5 11.0 11.5 9.24 50 160 190 2.5 7/ 0.67 2.01 0.8 1.5 1.5 12.0 12.5 7.41 50 190 220 3.5 7/ 0.8 2.4 0.8 1.5 1.5 12.5 13.0 5.20 50 225 240 5.5 7/ 1.0 3.0 1.0 1.5 1.5 14.5 15.0 3.33 50 320 360 8 7/ 1.2 3.6 1.2 1.5 1.5 16.5 17.5 2.31 50 440 485 1.5 7/ 0.52 1.56 0.8 1.5 1.5 11.0 11.5 12.1 50 165 190 2 7/ 0.6 1.8 0.8 1.5 1.5 12.0 12.5 9.24 50 200 230 4 2.5 7/ 0.67 2.01 0.8 1.5 1.5 12.5 13.5 7.41 50 235 260 3.5 7/ 0.8 2.4 0.8 1.5 1.5 13.5 14.0 5.20 50 280 315 5.5 7/ 1.0 3.0 1.0 1.5 1.5 16.0 16.5 3.33 50 405 450 8 7/ 1.2 3.6 1.2 1.5 1.5 18.0 18.5 2.31 50 550 585 1.5 7/ 0.52 1.56 0.8 1.5 1.5 12.5 13.0 12.1 50 200 230 5 2 7/ 0.6 1.8 0.8 1.5 1.5 13.0 13.5 9.24 50 240 270 2.5 7/ 0.67 2.01 0.8 1.5 1.5 14.0 14.5 7.41 50 280 325 3.5 7/ 0.8 2.4 0.8 1.5 1.5 14.5 15.0 5.20 50 340 365 5.5 7/ 1.0 3.0 1.0 1.5 1.5 17.0 17.5 3.33 50 490 530 8 7/ 1.2 3.6 1.2 1.5 1.5 20.0 21.0 2.31 50 685 370 1.5 7/ 0.52 1.56 0.8 1.5 1.5 13.5 14.0 12.1 50 210 245 2 7/ 0.6 1.8 0.8 1.5 1.5 14.0 14.5 9.24 50 280 310 6 2.5 7/ 0.67 2.01 0.8 1.5 1.5 15.0 15.5 7.41 50 330 360 3.5 7/ 0.8 2.4 0.8 1.5 1.5 15.5 16.5 5.20 50 400 435 5.5 7/ 1.0 3.0 1.0 1.5 1.5 18.5 19.5 3.33 50 590 630 8 7/ 1.2 3.6 1.2 1.5 1.5 22.0 23.0 2.31 50 810 850 (*) CVV: Copper conductor, PVC insulated, PVC Sheath CVV-S: Copper conductor, PVC insulated, PVC Sheath with coper shield Construction/KÕt cÊu 1. Conductor/Lâi dÉn ®iÖn : Copper/§ång 2. Insulation/Líp c¸ch ®iÖn : XLPE Applied spec. : Tiªu chuÈn ¸p dông 3. Filler/Líp ®én Iec 60502 4. Outer sheath/Vá bäc ngoµi : FR-PVC or LSHF IEC 60332/BS 4066 LSHF: Low Smoke Halogen Free Flame retardant 14
0.6 kv flame retardant cable D©y c¸p chèng bÐn ch¸y 0.6 kv IEC 60332/BS 4066 Control cable - C¸p ®iÒu khiÓn D.C Cond. Insulation Approx. weight Conductor - Lâi dÉn Insulation Sheath thickness Approx. Overall Dia. No. of Resistance Resistance Khèi lưîng c¸p thickness Cores §é dµy vá bäc §ưêng kÝnh ngoµi at 20oC at 20oC gÇn ®óng Sè lâi Nom. area Structure Diameter §é dµy §iÖn trë c¸ch ®iÖn §iÖn trë DC (kg/km) TiÕt diÖn KÕt cÊu §öêng kÝnh (mm) (mm) c¸ch ®iÖn 2 (mm ) (No/mm) (mm) (mm) CVV* CVV-S* CVV* CVV-S* ( /km) (M. /Km) CVV CVV-S 1.5 7/ 0.52 1.56 0.8 1.5 1.5 13.5 14.0 12.1 50 250 285 2 7/ 0.60 1.8 0.8 1.5 1.5 14.0 14.5 9.24 50 300 335 7 2.5 7/ 0.67 2.01 0.8 1.5 1.5 15.0 15.5 7.41 50 355 390 3.5 7/ 0.80 2.4 0.8 1.5 1.5 15.5 16.5 5.20 50 430 475 5.5 7/ 1.00 3.0 1.0 1.5 1.5 18.5 19.5 3.33 50 640 690 8 7/ 1.20 3.6 1.2 1.5 1.5 22.0 23.0 2.31 50 900 980 1.5 7/ 0.52 1.56 0.8 1.5 1.5 14.5 15.0 12.1 50 280 320 2 7/ 0.60 1.8 0.8 1.5 1.5 15.0 15.5 9.24 50 340 375 8 2.5 7/ 0.67 2.01 0.8 1.5 1.5 16.5 17.0 7.41 50 410 445 3.5 7/ 0.80 2.4 0.8 1.5 1.5 17.0 17.5 5.20 50 500 535 5.5 7/ 1.00 3.0 1.0 1.5 1.5 21.0 21.5 3.33 50 730 780 8 7/ 1.20 3.6 1.2 1.6 1.6 24.0 24.5 2.31 50 1,040 1,120 1.5 7/ 0.52 1.56 0.8 1.5 1.5 16.5 17.0 12.1 50 355 400 2 7/ 0.60 1.8 0.8 1.5 1.5 17.5 18.0 9.24 50 430 465 2.5 7/ 0.67 2.01 0.8 1.5 1.5 18.5 19.0 7.41 50 485 520 10 3.5 7/ 0.80 2.4 0.8 1.5 1.5 19.5 21.0 5.20 50 630 675 5.5 7/ 1.00 3.0 1.0 1.6 1.6 24.0 25.0 3.33 50 940 995 8 7/ 1.20 3.6 1.2 1.8 1.8 29.0 29.5 2.31 50 1,360 1,400 1.5 7/ 0.52 1.56 0.8 1.5 1.5 17.5 18.0 12.1 50 410 455 2 7/ 0.60 1.8 0.8 1.5 1.5 18.0 18.5 9.24 50 490 530 12 2.5 7/ 0.67 2.01 0.8 1.5 1.5 19.5 20.0 7.41 50 545 595 3.5 7/ 0.80 2.4 0.8 1.5 1.5 21.0 21.5 5.20 50 720 765 5.5 7/ 1.00 3.0 1.0 1.7 1.7 25.0 26.0 3.33 50 1,100 1,160 8 7/1.20 3.6 1.2 1.8 1.8 30.0 30.5 2.31 50 1,560 1,820 1.5 7/ 0.52 1.56 0.8 1.5 1.5 18.5 19.0 12.1 50 485 540 2 7/ 0.60 1.8 0.8 1.5 1.5 19.0 19.5 9.24 50 575 630 2.5 7/ 0.67 2.01 0.8 1.5 1.5 21.5 22.0 7.41 50 650 700 15 3.5 7/ 0.80 2.4 0.8 1.5 1.6 22.0 23.0 5.20 50 855 930 5.5 7/ 1.00 3.0 1.0 1.7 1.8 27.0 28.0 3.33 50 1,310 1,400 1.5 7/ 0.52 1.56 0.8 1.5 1.5 21.0 21.5 12.1 50 620 680 2 7/ 0.60 1.8 0.8 1.5 1.5 22.0 22.5 9.24 50 735 790 20 2.5 7/ 0.67 2.01 0.8 1.6 1.6 24.0 24.5 7.41 50 875 930 3.5 7/ 0.80 2.4 0.8 1.6 1.6 25.0 25.5 5.20 50 1,130 1,190 5.5 7/ 1.00 3.0 1.0 1.9 1.9 31.0 31.5 3.33 50 1,730 1,800 1.5 7/ 0.52 1.56 0.8 1.6 1.6 24.5 25.0 12.1 50 880 955 2 7/ 0.60 1.8 0.8 1.7 1.7 26.0 27.0 9.24 50 1,100 1,140 30 2.5 7/ 0.67 2.01 0.8 1.7 1.7 28.0 29.0 7.41 50 1,250 1,300 3.5 7/ 0.80 2.4 0.8 1.8 1.8 30.0 31.0 5.20 50 1,670 1,730 1.5 7/ 0.52 1.56 0.8 1.6 1.6 26.5 27.0 12.1 50 1,060 1,140 2 7/ 0.60 1.8 0.8 1.7 1.7 29.5 30.0 9.24 50 1,300 1,390 37 2.5 7/ 0.67 2.01 0.8 1.8 1.8 30.0 31.0 7.41 50 1,510 1,600 3.5 7/ 0.80 2.4 0.8 2.0 2.0 36.0 37.0 5.20 50 2,160 2,280 (*) CVV: Copper conductor, PVC insulated, PVC Sheath CVV-S: Copper conductor, PVC insulated, PVC Sheath with coper shield 15
Comparison between Flame retardant cables and Normal cables So s¸nh c¸p chèng bÐn ch¸y vµ c¸p thêng Flame retardant cables Normal cables C¸p chèng bÐn ch¸y C¸p thêng 10 min. 20 min. Test finish 16
17
LOP THUC HANH THIET KE M&E TAI TP.HCM KHAI GIANG CAC LOP CHUYEN DE M&E THUONG XUYEN Dia diem : 38 Tran Khanh Du – P. Tan Dinh – Q1 – Tp.HCM Ghi danh : Email : info@lopthietkedien.com Phone : 0906561078 Website : http://lopthietkedien.com