Enabling eigrp

Configuration requirements: (65 marks) 1. Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology.(10) 2. Perform Basic Router Configurations all Routers.(5) 3. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2.(5) 4. Enable routing on HQ, BRANCH1, and BRANCH2 by using the dynamic routing protocol as EIGRP.(Using wildcard mask, AS number = 1).(30) 5. Configure the static route for the Internet connection (10) 6.

2p anhchangxuixeo1002 14-03-2013 79 6   Download

Upon completing this lesson, you will be able to: Describe the features and operation of EIGRP Use Cisco IOS commands to configure dynamic routing using EIGRP, given a functioning router Use show and debug commands to identify anomalies in dynamic routing operation using EIGRP, given an operational router

12p trinhvang 25-01-2013 59 8   Download

Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology.(10) 2. Perform Basic Router Configurations all Routers.(5) 3. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2.(5) 4. Enable routing on HQ, BRANCH1, and BRANCH2 by using the dynamic routing protocol as EIGRP.(Using wildcard mask, AS number = 1).(30)

2p phutran76 16-07-2012 96 16   Download

Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology. 2. Perform Basic Router Configurations all Routers. 3. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2. 4. Enable routing on HQ, BRANCH1, and BRANCH2 by using the dynamic routing protocol as EIGRP.(Using wildcard mask, AS number = 1).

2p phutran76 16-07-2012 152 59   Download

Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology. 2. Perform Basic Router Configurations all Routers. 3. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2. 4. Enable routing on R1,R2, R3, R4, R5 and R6 by using the dynamic routing protocol as EIGRP.

2p phutran76 16-07-2012 79 14   Download

kết nối với Router P central. - Trong phần này, bạn sẽ có nhiệm vụ enable Frame Relay liên kết giữa các router P và router P1, và sau đó enable Label Distribution Protocol (LDP) cho các kết nối giữa các router. 5a. Các bước cần làm. - Step 1: Cấu hình địa chỉ IP và các giá trị DLCI trên các interface sử dụng các tham số trong bảng dưới đây. Chú ý các tham số này chỉ được cấu hình trên các router P, không được cấu hình trên các router PE. Router P11 P12 P21 P22...

11p ctnhukieu2 07-04-2011 102 19   Download