REPORT  DESIGN AND MANUFACTURING  PLASTIC INJECTION MOLD

2 plate injection  mold

2 plate injection mold

A cavity

Many cavity

Having grafted core

Having core inside the core graft  transplantation

Consists of 2 parts: mold prior (negative mold) and patterned (positive  mold)

ấ ạ C u t o

II. PRINCIPLE OF OPERATION

Tables machine motion from left to right to bring action part mold

Shaft guidance and navigation for  the second silver mold half and  static mold

II. PRINCIPLE OF OPERATION When the second half against the same mold, the plastic molding  machine will pump into the cavity, depending on the magnitude of  the plastic products will be filled within 18 to 60 seconds

The cooling system will operate

II. PRINCIPLE OF OPERATION

The process of pushing the plate compression springs push the mold,  pushing shaft of the machine will push two plates push, pulls in the  system and the escape

II. PRINCIPLE OF OPERATION

This process is performed on an ongoing basis

III. APPLICATION

•These products have fewer vents.

Is the civil, personal  items, household utensils.

Products with high accurately and high  technical requirements.

Based on the public to identify the mold 2  sheets?

 Mold Based on only 2 plates, 1 move 1 stand still, just  open one time was able to get products and plastic  channels (Roll longer sticky resin on the product).  The layout channel (channel 1 on the same plane)  • The structure of the mold  • Products after withdrawing mold  characteristics to identify a second mold plate?