TCXDVN 266 _1

Chia sẻ: Ali Ali | Ngày: | Loại File: DOC | Số trang:20

lượt xem

TCXDVN 266 _1

Mô tả tài liệu
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

5.5.3. Where in two sides of corridor there is wall edge, then the clearance width must be in accordance with regulation in clause 5.5.1. 5.5.4. Handrails in two sides of corridor must be at an elevation of 900mm. Rotating angle at deviation points is preferably arched wall face or right angled wall face. Where there is difference in elevation at the extremity of corridor and the end of corridor with floor surface or ground surface, it must be balustrade, shielding plate or shielding edge, and there is a need for installation of safety signpost. ...

Chủ đề:

Nội dung Text: TCXDVN 266 _1

Đồng bộ tài khoản