Investigation on the influence of the dielectrics on the material removal characteristics of EDM

Influence of temperature on expander stability and on the cycle life of negative plates

10 p | 61 | 10

Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis

13 p | 21 | 1

Influences of catalytic temperatures and ru-loaded catalysts on waste tire pyrolysis

10 p | 7 | 0

Microstructure and residual properties of green concrete composites incorporating waste carpet fibers and palm oil fuel ash at elevated temperatures

14 p | 2 | 0

Microstructures and mechanical properties of polymer modified mortars under distinct mechanisms

9 p | 2 | 0

Development of multi-cell flows in the three-layered configuration of oxide layer and their influence on the reactor vessel heating

12 p | 2 | 0

Influence of edge crack on frequencies of thin plate in bending

11 p | 8 | 0

Crack analysis for some structures subjected to thermal and dynamic loads

12 p | 8 | 0

Study the influences of the radionuclide depth distributions on the FEPE for the measurements of the soil activity using in situ HPGe gamma spectrometry

7 p | 1 | 0