intTypePromotion=1
ADSENSE

Effect and optimization of various machine process parameters on the surface roughness in EDM

Chia sẻ: Đăng Xuân Phương | Ngày: | Loại File: PDF | Số trang:8

28
lượt xem
1
download
 
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

(BQ) Electrical Discharge Machining (EDM) is a non-traditional machining process which is more efficient than traditional maching process due to ease of machining of difficult-to-machine materials with complex shapes. EDM is used for machining of toughened and high strength conductive materials which is hard enough to cut by traditional processes.

Chủ đề:
Lưu

Nội dung Text: Effect and optimization of various machine process parameters on the surface roughness in EDM

Available online at www.sciencedirect.com<br /> <br /> ScienceDirect<br /> Procedia Materials Science 5 (2014) 1702 – 1709<br /> <br /> © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license<br /> (http://creativecommons.org/licenses/by-nc-nd/3.0/).<br /> Selection and peer-review under responsibility of Organizing Committee of AMME 2014<br /> <br /> 2211-8128 © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license<br /> (http://creativecommons.org/licenses/by-nc-nd/3.0/).<br /> Selection and peer-review under responsibility of Organizing Committee of AMME 2014<br /> doi:10.1016/j.mspro.2014.07.359<br /> <br /> Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 1709<br /> <br /> 1703<br /> <br /> 1704<br /> <br /> Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 1709<br /> <br /> Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 1709<br /> <br /> 1705<br /> <br /> 1706<br /> <br /> Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 1709<br /> <br />
ADSENSE

CÓ THỂ BẠN MUỐN DOWNLOAD

 

Đồng bộ tài khoản
2=>2