Composite materials reinforcement

The aim of this project was to design, fabricate and characterise multifunctional structural composites incorporating phase change materials for thermal management applications. The specific research objectives to achieve this goal were formulated as follows: Investigate effective methods to integrate microencapsulated PCMs into glass fibrereinforced epoxy composites; Evaluate the mechanical properties of micro-PCMs enhanced FRP composites and investigate associated failure mechanisms; Study the thermal management effectiveness of micro-PCMs enhanced FRP composites.

125p runthenight04 02-02-2023 12 3   Download

Steel fiber reinforced concrete (SFRC) is a multiple-composite material developed during the early 1970s. In SFRC, short steel fibers are randomly distributed in concrete. Steel fibers can prevent the development of micro-cracks inside the concrete and reduce the expansion and development of the macro-cracks, thus enhance mechanical performance of SFRC. However, there is lack of studies on the influence of flowability of fresh SFRC on the steel fiber distribution patterns and mechanical properties of hardened SFRC.

85p runthenight04 02-02-2023 8 4   Download

The objective of the research is to evaluate combination ability of nano additive with carbon black reinforced for rubber and rubber blend; create rubber nanocomposite materials with a high quality, solvent durability and sustainability in the naturally humid environment.

27p capheviahe27 23-02-2021 27 3   Download

Manufacture composite based on epoxy reinforced by glass fiber with organ – modified nanosilica using organotitanate curing agent that have good mechanical strength, thermal stability, flame restraint ability; improve the toughness of epoxy resin by incorporating reinforcing agent such as organ – modified nanosilica and glass fiber with appropriate manufacturing condition and ratio.

28p capheviahe26 25-01-2021 31 3   Download

A new composite material with neutron radiation shielding properties is presented. This fiber reinforced concrete material incorporates basalt-boron fiber, with different concentrations of boron oxide in fiber, and is applicable to nuclear energy and nuclear waste management.

8p christabelhuynh 29-05-2020 17 0   Download

In recent years, efforts have been made to produce advanced composite materials in order to lessen environmental impact and to extent sustainability. Traditional materials are largely substituted by composites due to their greater properties like flexural strength, low thermal expansion and high strength.

10p tohitohi 19-05-2020 22 0   Download

This paper presents a novel composite material produced by a natural reinforcement subjected to tensile test. The used reinforcement is made of Diss fibers. The Diss (Ampelodesma mauritanica) is a Mediterranean wild plant.

6p tohitohi 19-05-2020 32 3   Download

In this study, the impact response of glass/epoxy laminates interleaved by Polycaprolactone (PCL) nanofibers is considered. PCL is a thermoplastic polymer, which is a good choice for toughening epoxy-based composite. The impact tests were conducted on curved laminates and under 24 and 36J.

6p tohitohi 19-05-2020 25 1   Download

The purpose of this work is to make computer aided engineering (CAE) analysis of mono parabolic leaf spring and to see the effect of change of material in the optimized leaf. A mono steel leaf spring and a mono leaf spring made of composite material have been selected for this comparative analysis.

8p tohitohi 19-05-2020 31 1   Download

Tuyển tập báo cáo các nghiên cứu khoa học quốc tế ngành hóa học dành cho các bạn yêu hóa học tham khảo đề tài: Inorganic nanotubes reinforced polyvinylidene fluoride composites as low-cost electromagnetic interference shielding materials

11p sting05 09-02-2012 71 5   Download