Technological parameters

The objectives of the present study are: Justifying the possibility of using laser cladding technology as a repair method for refurbishment of worn railway axles without jeopardizing their fatigue properties; Analysis of crack initiation and propagation in laser clad samples.

130p runthenight07 01-03-2023 6 3   Download

The aim of this research is to improve the reliability of the dynamic formula. This research program will concentrate on the proposal of a correction factor to adjust for this dynamic component similar to the damping parameter used in the Wave Equation Analysis and validate its reliability experimentally and theoretically. Similarly, the issue of the variation in the hammer energy delivered to pile needs to be improved by the adoption of new technology and validate experimentally.

207p runthenight07 01-03-2023 6 3   Download

Once the mechanical properties of printed TPU are characterised, a novel, low cost, and environmentally friendly method for concrete casting using printed TPU moulds is proposed in this thesis. The findings of this thesis will provide clear guidelines for the selection of processing parameters for additively manufactured TPU parts and the method of casting complicated concrete structures with additively manufactured TPU mould.

98p runordie3 06-07-2022 13 3   Download

Objectives of the study: Develop the technology making domestic wastewater completely treated with self-backwashing filter based on floating media for application into the reality.

29p petsematary 05-06-2021 5 2   Download

Find the optimal technology parameters and components for fabricating Fe-based nanomaterials using high-energy ball milling method; clarify the relationship between technological conditions with the structural characteristics and magnetic properties of fabricated materials; assess the applicability of Fe, Fe-Co nano materials in fabricating nanocomposite magnets and magnetic induction heating.

24p capheviahe26 25-01-2021 19 2   Download

In Vietnam, currently the study of fuel cells is almost neglected and there is very little fundamental research on this issue. The research on fuel cells of our country is at innitial stage, mainly researching catalytic material in the laboratory and almost has not research in the technology of manufacturing fuel cell (stack).

28p larachdumlanat129 20-01-2021 20 5   Download

Study on fabrication proton exchange membrane fuel cell (PEMFC). Characteristics and selection of the optimal catalyst material and composition for the catalyst layer in membrane electrodes assembly (MEA) and to evaluate influence of manufacturing technological parameters on MEA properties and from that basis master core technology to develop MEA manufacturing process.

28p trinhthamhodang7 31-08-2020 22 2   Download

In this paper, study is made for exploring supplier evaluation based on: (1) Evaluation parameters identified by 161 researchers from 1966 to 2012 (2) Scorecards used by Indian car manufacturing companies for evaluation of their suppliers and (3) International standard ISO/TS16949.

13p guineverehuynh 22-06-2020 7 0   Download

This presents the advantage of decoupling the management of the minor actinides from the conventional fuel and not impacting the core reactivity coefficients. In both cases, the design and analyses of potential transmutation systems have been carried out in the frame of Gen IV fast reactor using a “perturbation” approach in which nominal power reactor parameters are modified to accommodate the loading of minor actinides.

8p christabelhuynh 31-05-2020 25 1   Download

The thesis aims to produce nanoparticles (dielectric, ferrites, ferromagnetic, metal) and their nanoparticles. Find the optimal technology process, suitable for making absorbent samples. Survey the basic properties of fabricated nanomaterials. Measuring and studying the effects of microwave absorption in magnetic-dielectric nanoparticles, absorption mechanisms and dependence of absorbing properties on the parameters of materials, thereby finding solutions Enhance absorption capacity as well as adjust absorption parameters.

28p xacxuoc4321 09-07-2019 29 4   Download

(BQ) The adequate selection of manufacturing conditions is one of the most important aspects to take into consideration in the die-sinking electrical discharge machining (EDM) of conductive ceramics, as these conditions are the ones that are to determine such important characteristics as: surface roughness, electrode wear (EW) and material removal rate, among others. In this work, a study was carried out on the influence of the factors of intensity (I), pulse time (ti) and duty cycle (η) over the listed technological characteristics.

7p xuanphuongdhts 27-03-2017 38 2   Download

AN EXPLORATION OF THE RELATIONSHIP BETWEEN BUSINESS PROCESS REDISIGN AND INFOMATION TECHNOLOGY INFRASTRUCTERES I conducted 5,000 draws, first choosing effectiveness parameters for each district and then permuting the assignment of income bins to districts until I obtained an equilibrium assignment (i.e. one in which no low-income district was preferable to any highincome district).31

339p mualan_mualan 25-02-2013 58 10   Download

Upon completing this module, you will be able to: Explain how bridging and switching operates Explain the purpose and operations of the Spanning-Tree Protocol Verify the default configuration of the device, given a functioning access layer switch Build a functional access switch configuration to support the specified network operational parameters, given a network design Execute an add, move, or change on an access layer switch, given a new network requirement

15p trinhvang 25-01-2013 60 5   Download

Tuyển tập các báo cáo nghiên cứu về sinh học được đăng trên tạp chí sinh học thế giới đề tài: Genetic parameters of meat technological quality traits in a grand-parental commercial line of turkey

13p toshiba19 08-11-2011 49 4   Download

Tham khảo luận văn - đề án 'báo cáo lâm nghiệp: "comparison of morphological and physiological parameters of the planting material of norway spruce (picea abies [l.] karst.) from intensive nursery technologies with current bareroot plants"', luận văn - báo cáo phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

7p toshiba4 13-09-2011 93 5   Download

Introduction to the Oracle Server Technologies avoids these issues by formatting a report’s output as XML tags. Any client can request an XML Publisher report and (provided it has an XML parser) display the results. This is the key to distributing reports over wireless protocols to any device, such as a cellular telephone. Oracle Discoverer is an end-user tool for report generation. Oracle Reports and XML Publisher need a programmer to design the report.

10p vongsuiphat 04-01-2010 168 27   Download