Integrity Opitimization

Chia sẻ: _ _ | Ngày: | Loại File: PDF | Số trang:62

Thêm vào BST

Báo xấu

12
lượt xem 2
download

Download Vui lòng tải xuống để xem tài liệu đầy đủ

Document "Integrity Opitimization" scope and objectives Upon completion of this course, you will be able to: Measure LTE integrity performance; Explain the counters that are used to measure LTE integrity performance; Use eNB counters to create EUTRAN integrity KPIs

Chủ đề:

Bình luận(0) Đăng nhập để gửi bình luận!

Lưu

Nội dung Text: Integrity Opitimization

Integrity optimization
Scope and objectives Scope › eNB integrity introduction; › Integrity KPI and parameters; › Integrity Investigation and case study; Objectives Upon completion of this course, you will be able to: › Measure LTE integrity performance; › Explain the counters that are used to measure LTE integrity performance › Use eNB counters to create E- UTRAN integrity KPIs; LTE Training For True Optimization Team | 2016-12-01 | Page 2 (29)
Agenda › Integrity Introduction; › KPI and Parameters; › Integrity Investigation and Case Study; LTE Training For True Optimization Team | 2016-12-01 | Page 3 (29)
eNB Integrity Introduction
Integrity Definition › EUTRAN Integrity is a measure of the Network’s ability to provide wireless end user services with end-user performance quality that meets expectations. › Integrity performance can be divided into three parts: › EUTRAN Throughput: The speed at which packets can be transferred once the first packet has been scheduled on the air interface; › EUTRAN Latency: The time it takes to schedule the first packet on the air interface, determined from the time it was received in RBS; › EUTRAN Packet Loss: The ratio of lost and transferred packets. LTE Training For True Optimization Team | 2016-12-01 | Page 5 (29)
eNB Integrity KPI and Parameters
agenda › EUTRAN Throughput KPIs; › EUTRAN Latency KPIs; › EUTRAN Packet Loss KPIs; › Key Parameters; LTE Training For True Optimization Team | 2016-12-01 | Page 7 (29)
EUTRAN Throughput KPIs AVERAGE UE DL Thpt For calculating DL user throughput, Last TTI data_volume (kbits) (pmPdcpVolDlDrbLastTTI) is always removed as for last TTI coding is selected based on size and not the radio conditions so it doesn't reflect actual radio throughput. LTE Training For True Optimization Team | 2016-12-01 | Page 8 (29)
DL DRB Traffic Volume LTE Training For True Optimization Team | 2016-12-01 | Page 9 (29)
EUTRAN Throughput KPIs AVERAGE UE DL Thpt per qci LTE Training For True Optimization Team | 2016-12-01 | Page 10 (29)
EUTRAN Throughput KPIs AVERAGE UE UL Thpt LTE Training For True Optimization Team | 2016-12-01 | Page 11 (29)
UL DRB Traffic Volume LTE Training For True Optimization Team | 2016-12-01 | Page 12 (29)
EUTRAN Throughput KPIs UL LCG Traffic Volume › UE will combine the similar Qos service in the same LCG › For the UL, instead of measuring per QCI the measurement are Logical Channel Group (LCG) level LTE Training For True Optimization Team | 2016-12-01 | Page 13 (29)
EUTRAN Throughput KPIs UL LCG Traffic Volume › There actually has 4 LCG(LCG0-3),according to the 3GPP(TS23.203&36.331) QCIs(1-3) are mapping to LCG1 ，QCIs(4-6) are mapping to LCG2，QCIs(7-9) are mapping to LCG3 LTE Training For True Optimization Team | 2016-12-01 | Page 14 (29)
EUTRAN Throughput KPIs DL Latency This KPI measures the impact on the end user. NOTE that the latency will increase with more instantaneously active UEs and will also depend on the scheduling algorithm(s) being used. LTE Training For True Optimization Team | 2016-12-01 | Page 15 (29)
DL Latency Measurement LTE Training For True Optimization Team | 2016-12-01 | Page 16 (29)
EUTRAN Packet Loss KPIs Packet Loss LTE Training For True Optimization Team | 2016-12-01 | Page 17 (29)
Packet Loss Measurement DL UL LTE Training For True Optimization Team | 2016-12-01 | Page 18 (29)
EUTRAN Packet Loss KPIs Packet Loss LTE Training For True Optimization Team | 2016-12-01 | Page 19 (29)
Key Parameters LTE Training For True Optimization Team | 2016-12-01 | Page 20 (29)