Cathode material

In this study, a layered O3-type Ni-rich cathode material for sodium-ion batteries was synthesized through co-precipitation followed by a solid-state reaction at 650 oC in dry air. The electrochemical properties of the Ni-rich material were evaluated. Charge/discharge performance demonstrated that the material delivered higher capacity compared to other layered oxides.

6p vikwong 29-09-2024 2 1   Download

Nanocomposite material LiFe1-xMxPO4/Gr was successfully synthesized achieving it with single phase. It’s response required electrochemical parameters of positive electrode materials for Li-ion batteries such as: improved diffusion coefficient and conductivity, higher capacity comparative with LFP in same conditional synthesis.

28p capheviahe26 25-01-2021 21 3   Download

In this work, we developed highly porous activated carbon (AC) materials with micro/meso porosity through carbonizing rice husk and treating them with K2CO3. Elemental sulfur was then loaded to the micropores through a solution infiltration method to form rice husk-derived activated carbon (RHAC)aS composite materials.

7p tamynhan4 06-09-2020 8 2   Download

These results indicate that sol-gel processing is a promising method for preparing Ni-rich cathode materials. The sample prepared under the optimal conditions had a well ordered hexagonal layered structure. The charge–discharge tests showed that the initial capacities of the sample were 220.456 and 185.937 mAhg -1 at the discharge rate of 0.1 C between 3.0 and 4.3 V, respectively. The capacity retention ratio was 81.36 % at 1 C after 50 cycles.

5p lamtan3547 04-11-2018 20 0   Download